• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.581-588
• /
• 2019

MRI is superior when contrasted to help the organization generate artifacts resolution, but also affect the diagnosis and create a image that can not be read. Metal is inserted into the tooth, it is necessary to often be inhibited in imaging by causing the geometric distortion due to the majority and if the difference between the magnetic susceptibility of a ferromagnetic material or paramagnetic reducing them. The purpose of this study is to conduct a metal artefact in accordance with the analysis using a diamagnetic material. The magnetic material include a wire for the orthodontic bracket and a stainless steel was used as a diamagnetic material was used copper, zinc, bismuth. Testing equipment is sequenced using 1.5T, 3T was used was measured using a SE, TSE, GE, EPI. A self-produced phantom material was used for agarose gel (10%) to a uniform signal artifacts causing materials are stainless steel were tested by placing in the center of the phantom and cover inspection of the positive cube diamagnetic material of 10mm each length.After a measurement artefact artifact zone settings area was calculated using the Wand tool After setting the Low Threshold value of 10 in the image obtained by subtracting images, including magnetic material from a pure tool phantom images using Image J. Metal artifacts occur in stainless steel metal artifact reduction was greatest in the image with the bismuth diamagnetic materials of copper and zinc is slightly reduced, but the difference in degree will not greater. The reason for this is thought to be due to hayeotgi offset most of the susceptibility in bismuth diamagnetic susceptibility of most small ferromagnetic. Most came with less artifacts in image of bismuth in both 1.5T and 3T. Sequence-specific artifact reduction was most reduced artifacts from the TSE 1.5T 3T was reduced in the most artifacts from SE. Signal-to-noise ratio was the lowest SNR is low, appears in the implant, the 1.5T was the Implant + Bi Cu and Zn showed similar results to each other. Therefore, the results of artifacts variation of diamagnetic material, magnetic susceptibility (${\chi}$) is the most this shows the reduced aspect lower than the implant artificial metal artifacts criteria in the video using low bismuth susceptibility to low material the more metal artifacts It was found that the decrease. Therefore, based on the study on the increase, the metal artifacts reduction for the whole, as well as dental prosthesis future orthodontic materials in a way that can even reduce the artifact does not appear which has been pointed out as a disadvantage of the solutions of conventional metal artifact It is considered to be material.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.143-149
• /
• 2019

This study was conducted to investigate the graft-taking and growth of grafted cucumber seedlings as affected by light quality and blink cycle of LED modules. Four light quality treatments, namely blue, red, blue+red, white LED and four blink cycle levels of 5s/5s, 7s/3s, 9s/1s and control were provided to investigate the effect of lighting quality and blink cycle on the graft-taking and growth of grafted cucumber seedlings. Photoperiod for the control was 12/12 h. Photosynthetic photon flux, air temperature, and relative humidity for healing were maintained at $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $25^{\circ}C$, and 90%, respectively. There was no significant difference in graft-taking of grafted cucumber seedlings according to light quality except the blue LED with the blink cycle of 5s/5s. Regardless of the blink cycle, there was no significant difference in graft-taking of cucumber seedlings healed under red, blue+red, and white LED modules. These results implied that the effects of light quality and blink cycle on the graft-taking were not significant. Differences in the leaf length, leaf area, and fresh weight of cucumber seedlings healed blue or red LED with the blink cycle of 9s/1s were found to be significant. There was no significant effect of the blink cycle on the growth of cucumber seedlings healed under white LED modules. The prices of white LED are gradually falling due to increased demand. Considering the manufacturing unit price of white LED modules, the cost savings of 10-15% are expected as compared to the conventional blue/red LED modules. Therefore, it was concluded that the use of white LED modules will be economical as an artificial lighting sources for healing of grafted seedlings.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.71-78
• /
• 2021

Green areas and the area of available horizontal surfaces are gradually decreasing due to the overcrowding of buildings. It is adversely affecting the urban climate and ecosystem. However, the recognition of the importance of green areas is gradually increasing. As a result, the importance of wall greening using vertical surfaces is growing. However, despite the fact that domestic wall greening guidelines and institutions related to orientations restrict planting. there was no study to determine whether there were actual differences in plant growth due to orientations. Therefore, this study compared and analyzed the plant growth characteristics by orientations to apply actual wall greening to cities. The experiment was conducted from May to September 2020. First of all, three octave walls were constructed to measure the temperature, the illumination, and the length of the plants once a week. The plants included Parthenocissus tricuspidata, Hedera rhombea, and Euonymus radicans cv. Aueonmarinata Rehd plants. As a result of the study, Parthenocissus tricuspidata was prolific in the north, and Hedera rhombea, and Euonymus radicans cv. Aueonmarinata Rehd plants were prolific in the south. All three types of plants were prolific in June-July, and the Parthenocissus tricuspidata was prolific in grass-growing, and in August, all the walls were 100% covered. Hedera rhombea had the lowest rate of herbaceous growth, and the vertical coverate was also lower at an average of 45%, but among the three plants, the sheath of the horizontal surface coverate was the highest. Euonymus radicans cv. Aueonmarinata Rehd was low in the speed of herbaceous growth, and finally, the walls were 100% covered except for the north and northwest directions. It was found that not all plants used for wall greening show the same growth, and the difference in growth varies more depending on plants than the effect of orientations. Therefore, it is better to identify the characteristics of plant growth and plant suitable plants for each directions.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2021

This study was conducted to examine the changes of photosynthesis, growth, chlorophyll contents and functional material contents in light intensity and EC concentration of wild baby leaf vegetable, Indian lettuce (Lactuca indica L. cv. 'Sunhyang') in DFT hydroponics. The cultivation environment was 25±1℃ of temperature and 60±5% of relative humidity in growth system. At 14 days after sowing, combination effect of light intensity (Photosynthetic Photon Flux Density (PPFD 100, 250, 500 µmol·m-2·s-1) and EC level (EC 0.8, 1.4, 2.0 dS·m-1) of nutrient solution was determined at the baby leaf stage. The photosynthesis rate, stomatal conductance, transpiration rate and water use efficiency of Indian lettuce increased as the light intensity increased. The photosynthesis rate and water use efficiency were highest in PPFD 500-EC 1.4 and PPFD 500-EC 2.0 treatment. The chlorophyll content decreased as the light intensity increased, but chlorophyll a/b ratio increased. Leaf water content and specific leaf area decreased as light intensity increased and a negative correlation (p < 0.001) was recognized. Plant height was the longest in PPFD 100-EC 0.8 and leaf number, fresh weight and dry weight were the highest in PPFD 500-EC 2.0. Anthocyanin and total phenolic compounds were the highest in PPFD 500-EC 1.4 and 2.0 treatment, and antioxidant scavenging ability (DPPH) was high in PPFD 250 and 500 treatments. Considering the growth and functional material contents, the proper light intensity and EC level for hydroponic cultivation of Indian lettuce is PPFD 500-EC 2.0, and PPFD 100 and 250, which are low light conditions, EC 0.8 is suitable for growth.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.23-28
• /
• 2021

This experiment was conducted to compare the seed productivity of Spring sown Italian ryegrass(Lolium multiflorum Lam.) depending on the seeding rates(20kg/ha, 30kg/ha, 40kg/ha) in Gangwon region. The experiment was a randomized block design with three replications. The test plots were located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian ryegrass variety was 'Greencall' developed by the National Institute of Animal Science, RDA. Italian Ryegrass was sown on March 26, 2020, and the seed harvesting was on the 60th day(2 July) from heading date. The heading date was May 8 with no difference, There were no significant differences in the agronomic characteristics including plant height. 30kg/ha seed rate was the highest at 146.8 seed/spike and 40kg/ha seed rate was the lowest at 114.7 seed/spike for the number of seeds per spike. The number of spikes per unit area was the highest in 40kg/ha at 886/㎡ and the lowest in 20kg/ha at 750/㎡. The yield of seed and straw was the highest in 40kg/ha at 1,288kg/ha and 2,970kg/ha respectively, but there was no difference. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was evaluated.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.1-10
• /
• 2022

Irrigation water supplied to the paddy field is consumed in the amount of evapotranspiration, underground infiltration, and natural and artificial drainage from the paddy field. Irrigation return flow is defined as the excess of irrigation water that is not consumed by evapotranspiration and crop, and which returns to an aquifer by infiltration or drainage. The research on estimating the return flow play an important part in water circulation management of agricultural watershed. However, the return flow rate calculations are needs because the result of calculating return flow is different depending on irrigation channel water loss, analysis methods, and local characteristics. In this study, the irrigation return flow rate of agricultural watershed was estimated using the monitoring and SWMM (Storm Water Management Model) modeling from 2017 to 2020 for the Heungeop reservoir located in Wonju, Gangwon-do. SWMM modeling was performed by weather data and observation data, water of supply and drainage were estimated as the result of SWMM model analysis. The applicability of the SWMM model was verified using RMSE and R-square values. The result of analysis from 2017 to 2020, the average annual quick return flow rate was 53.1%. Based on these results, the analysis of water circulation characteristics can perform, it can be provided as basic data for integrated water management.

• Journal of Ginseng Culture
• /
• v.4
• /
• pp.128-141
• /
• 2022

Baengnyeongdo Island, which belongs to Ongjin-gun, Incheon, is an island in the northernmost part of the West Sea in South Korea. Baengnyeong Island is the 15th largest island in Korea and covers an area of 51 km². The Korea Ginseng Corporation (KGC) investigated the possibility of growing ginseng on Baengnyeong Island in 1996. In 1997, thanks to the support of cultivation costs from Ongjin-gun, the first ginseng seedbed was built on Baengnyeong Island. In 1999, the seedlings were transplanted to a permanent field under a contract with KGC. In 2003, the first six-year-old ginseng harvest was performed, and KGC purchased all production according to the contract. Since then, KGC has signed on to grow ginseng until 2012 and purchased six-year-old ginseng until the fall of 2016. Since 2014, the GimpoPaju Ginseng Agricultural Cooperative Association has signed a ginseng production contract. According to a survey of nine 6-year-old ginseng fields (total 5,961 units) on Baengnyeong Island, the top five with good growth had a survival rate of 42.6 to 68%, and the bottom four with poor growth had an extremely low survival rate of 11.1 to 21.3%. The four fields with low survival rates were where hot peppers were planted before ginseng cultivation. It is believed that the excess nitrogen remaining in the soil due to the treatment of compost or manure during pepper cultivation causes ginseng roots to rot. The average incidence of Alternaria blight was 8.6%. Six six-year-old ginseng gardens were low at 1.1 to 4.7%, while the other three were high at 16.7 to 20.9%. It is assumed that the reason for the low survival rate and high incidence of Alternaria blight is a rain-leaking shield. Farmers used rain-leaking shields because the precipitation on Baengnyeong Island was smaller than on land. One field showed 3% of leaves with yellowish brown spots, a symptom of physiological disturbance of the leaf, which is presumed to be due to the excessive presence of iron in the soil. To increase the production of ginseng on Baengnyeong Island, it is necessary to develop a suitable ginseng cultivation method for the island, such as strengthening the field management based on the results of a scientific study of soil, using rain-resistant shading, and installing drip irrigation facilities. I hope that ginseng will become a new driving force for the development of Baengnyeong Island, allowing ginseng products and food to thrive in the beautiful natural environment of the island.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.468-475
• /
• 2022

This study was conducted to find out the efficiency of heating initiative temperature and carbon dioxide fertilization in summer squash (Cucurbita moschata D.). The heating start temperature experiment was performed at 9℃, 12℃, and 15℃ using an electric heater and operated when the temperature was lower than the target temperature. The CO₂ fertilization concentration experiment was performed from 7 to 12 with the control, 500 µmol·mol^-1, and 800 µmol·mol^-1 using liquefied carbon dioxide. Investigation items were plant height, stem diameter, number of leaves, leaf area, fresh weight, dry weight, also economic analysis was conducted by surveying only fruits exceeding 100 g. Photosynthesis was measured for the upper leaf position to calculate the saturation point according to the control. The photo saturation point was 587 µmol·m^-2·s^-1, and the CO₂ saturation point was 702 µmol·mol^-1. A_max values by carbon dioxide were 13.4, 17.8, 17.2, 19.6, and 17.5 µmolCO₂·m^-2·s^-1 in the order of 9℃, 12℃, 15℃, 500 µmol·mol^-1, and 800 µmol·mol^-1. In the temperature experiment, 9℃ in growth did not grow normally and no fruiting was performed. 12℃ and 15℃ were higher than 9℃, but there was no significant difference in growth and production. The CO₂ fertilization experiment showed no significant difference between the treatment in growth, but the productivity of 800 µmol·mol^-1 was the best. Comprehensively, the heating initiative temperature of 15℃ was good for crop growth and production, but there is no significant difference from 12℃, so it is good to set the heating start temperature to 12℃ economically, and maintaining of 800 µmol·mol^-1 is effective in increasing production.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.149-156
• /
• 2023

The purpose of this study is to compare of growth and chlorophyl between old-barley seed (OBS, 2019) and New-barley seed (NBS, 2020) exposed by X-ray. After germination the OBS and NBS, experimental group was exposed by 30 Gy X-ray using linear accelerator (Clinac IS, VERIAN, USA), by 6 MV X-ray, SSD 100 cm, 18 × 10 cm², 600 MU/min. Length was measured every day until 9th day, and chlorophyl was analyzed using spectrophotometer(uv-1800, shimadzu, japan) after measuring weight in 9th day. Data analysis was performed the Independent T-test using SPSS ver 26.0(Chicago, IL, USA). NBS grow more faster than OBS in control group, but OBS grow more faster than NBS in experimental group. Length of control group was longer significantly every day than that of experimental group in OBS. NBS weighted more than OBS in control group, but OBS weighted more than NBS in experimental group. In comparing chlorophyl density, NBS high more than OBS in control group as well as experimental group. Growth and weight of OBS was effected more those than NBS by X-ray, but NBS in chlorophyl by X-ray. It is expected to be used as basic data for future X-ray research in barley seed.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.3
• /
• pp.1-9
• /
• 2022

This study compared and reviewed the recognition determinants by applying the OECMs criteria, focusing on old big trees, plant of natural monument that are natural heritage under the national heritage system of the Cultural Heritage Administration, and the results are as follows. First, among the protected areas designated and managed by government agencies according to each protection purpose, it is necessary to actively introduce new conservation measures, OECMs, to fulfill the Biodiversity strategy for 2030 while the land area is already saturated. Second, the OECMs are geographically defined areas(CBD, 2018), not currently recognized as a protected areas, governed and managed in a way that achieves positived sustained and effective contribution to in situ conservation of biodiversity. Since the selection of term, the scope of application criteria, and the context of interpretation are inevitably different, it is necessary to separately legislate and establish related laws of the OECMs suitable for each country's situation. Third, as a result of reviewing the OECMs criteria for plant of natural monument, the final 58 potential resources were recognized. Important elements among the OECMs criteria are that buffer zones should be spaced apart from designated zones to secure a certain area, and that economic activities through commercial production should not occur and meet biodiversity standards. Among the potential candidates, 23 areas were analyzed to be geographically isolated and independent, such as Forest of Oriental Arborvitae in Do-dong, Daegu, and forest types such as Carstor Aralia of Gungchon-ri, Samcheok and Forest of Common Camellias in Maryang-ri, Seocheon. As a result of reviewing the application of OECMs criteria for plant of natural monument, it was confirmed that the functions as a traditional uses were specialized among the values of biodiversity, and ecosystem services and cultural and spiritual values were inherited through Korea's unique culture of old big trees and Dangsan ritual. In terms of biodiversity criteria, it can be used as an important factor in connecting human and natural ecosystem networks without the discovery of new species.