• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.231-241
• /
• 2011

Anoxia Treatment using inert gas like nitrogen and argon has been used to eradicate insects successfully in museums as alternative of methyl bromide and toxic insecticide. Killing efficacy of insect for anoxia treatment is depend on species of insects, oxygen concentration, temperature, relative humidity and gas. It is possible to kill museum insects which are most tolerant in anoxia environment, within 1 month below 0.03% of oxygen concentration in temperature $15{\sim}25^{\circ}C$ and relative humidity 40~60% of museum environment. And various systems like bag, tent, bubble and chamber depending on size and quantity of objects, are used.

• Journal of Applied Biological Chemistry
• /
• v.57 no.2
• /
• pp.141-144
• /
• 2014

The effects of electron beam irradiation on control of Myzus persicae and Planocococcus citri (Risso) were evaluated with the changes of mortality, emergence rate, fecundity, and egg hatchability. As a result of this study, M. persicae and P. citri (Risso) was not directly affected by electron beam irradiation with low doses (30, 60, 90, and 120 Gy) but the irradiation had effects on inhibition of development and reproduction of the pests.

• Conservation Science in Museum
• /
• v.1
• /
• pp.43-51
• /
• 1999

This is a brief study on the influence of fumigation (using mixed gas of methyl bromide and ethylene oxide) on old paintings. Fumigation is principally used to prevent biological damage of objects. Thirteen objects, including old colored map from Chosǒn Dynasty and some paintings, were selected for this research. Before and after fumigation, color measurements were made and changes of pH value were measured. The result is that the fumigation did not affect on discoloration of colored area and acidity of paper, as far as the standard of application(such as concentration of gas, exposing time and ect.) of fumigation was kept.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.675-687
• /
• 2019

Objective: Methyl bromide (MB) fumigant has been shown to be fatal to human when was exposed. However, it were still used the significant amount in quarantine disinfection sites. The purposes of this study were to assess the MB exposure status and characteristics by fumigation-related workers and to provide supporting data for management plan. Methods: For this study, the three groups related to fumigation work were composed. A total of 107 workers were directly exposed, 20 field inspectors were indirect, and 20 general quarantines were not exposed. The urinary bromide ion concentrations in each group were analyzed by using HPLC/ICP-MS, and the working characteristics were identified using the structured questionnaire. Results: The urinary bromide ion concentration in the exposed group of fumigation workers was higher than the indirect and non-exposed groups. In the work characteristics of workers, there was a significant tendency to increase urinary bromide ion concentrations with higher fumigation work years (≤4 years: 2.84 (1.13-7.11) mg/g cr, >4-15 years: 5.36 (4.37-6.57) mg/g cr, >15-37 years: 6.69 (5.27-8.49) mg/g cr, p=0.034). In the comparison of the average number of working days per month, the more working days, the higher the urinary bromide ion concentration was statistically significant (≤12.5 days: 2.59 (1.19-5.65) mg/g cr, >12.5-19.25 days: 5.46 (4.62-6.44) mg/g cr, >19.25-27.25 days: 7.93 (5.93-10.59) mg/g cr, p=0.002). Conclusion: This study was the first nationwide survey including biological monitoring in workers exposed to methyl bromide. The results of this study were expected to be used as a reference for workers' health rights in relation to fumigation, prevention of addiction accidents, and safe management plan.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.188-194
• /
• 2012

The interaction of 4-alkylbenzoic acid isomers with the micellar system of TTAB (tetradecyltrimethylammonium bromide) was studied by the UV/Vis spectrophotometric method. The solubilization constants ($K_s$) of 4-alkylbenzoic acid isomers into the TTAB micellar system and the critical micelle concentration (CMC) of TTAB have been measured with the change of temperature. Various thermodynamic parameters have been calculated and analyzed from those measurements. The results show that the values of ${\Delta}G^o{_s}$ for the solubilization of all the isomers are negative and the values of ${\Delta}H^o{_s}$ and ${\Delta}S^o{_s}$ are all positive within the measured temperature range. The effects of additives (n-butanol and NaCl) on the solubilization of 4-alkylbenzoic acid isomers have been also measured. There was a great change on the values of $K_s$ and CMC simultaneously with these additives. From these changes we can postulate that the solubilization sites of 4-alkylbenzoic acids are the core or deep palisade region of the TTAB micelle.

• 보존과학연구
• /
• s.34
• /
• pp.84-99
• /
• 2013

There are more than 2,900 different species of termites in the world, and just there are 23 species in Japan. They caused more severe infestation compared with Korea. When a structure has become infested with termites, it is important that appropriate action must be taken: the chemical pest control (fumigation, soil termiticide treatment, bait system etc.) or the non-chemical pest control (low oxygen treatment, carbon dioxide treatment, high/low temperature treatment etc.). Especially, there were attempts to make practical protocol of various alternatives since the fumigant(methyl bromide) had been phased out in 2005 in Japan, and practically non-chemical methods would be effective alternatives for some cases, where the scale of infestation is small and limited and when long treatment is possible. But most of all, it is important that the process of pest control is made according to each species of termites with consideration for different characteristics of termites.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.363-369
• /
• 2010

A postharvest treatment called CATTS (controlled atmosphere and temperature treatment system) has been used as an alternative nonchemical measure for methyl bromide fumigant treatment. This study applied CATTS to control the red flour beetle, Tribolium castaneum, infesting stored grains. Adults of T. castaneum were susceptible to $46^{\circ}C$ heat treatment. The susceptibility was further enhanced by addition of CA conditions (15% $CO_2$ and 1% $O_2$). When CATTS ($46^{\circ}C$, 15% $CO_2$, $16^{\circ}C/h$ treating rate) was applied to different developmental stages of T. castaneum, it showed 100% control efficacy by 120 min exposure. There was a variation in CATTS susceptibility among developmental stages, in which late instar larvae were most tolerant. Heat shock proteins of T. castaneum appeared to be implicated in the tolerance of CATTS.

• Composites Research
• /
• v.36 no.4
• /
• pp.275-280
• /
• 2023

Because polymer-based composites are lightweight and have excellent properties, their demand is growing rapidly as a way to fulfill properties that are difficult to achieve with a single material. As a result, there has been a lot of research on polymer nanocomposites, which are made by dispersing particles with a size of 1-100 nm in a polymer matrix. In addition, many nanocomposites using thermoplastic resins as matrix materials are being studied. In this study, poly(ethylene terephthalate) (PET)-based nanocomposites containing organic nanoclays modified with cetyltrimethylammonium bromide (CTAB) as interlayer materials were prepared. Among various nanoclays, vermiculite (VMT) has been studied to increase the mechanical and thermal properties of polymeric materials due to its low cost, abundant reserves and unique properties. However, the strong interlayer bonding of VMT has limited its utilization due to its poor exfoliation and dispersion performance within polymer matrices. In this study, the mechanical properties of the VMT content were confirmed by tensile tests, the dispersion of VMT particles in the PET matrix was evaluated by TEM cross-sectional images, and the nitrogen gas barrier properties were evaluated.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.50-57
• /
• 2017

Zinc oxide is, one of metal oxide semiconductor, harmless to human and environment-friendly. It has excellent chemical and thermal stability properties. Wurtzite-zinc oxide is a large band gap energy of 3.37 eV and high exciton binding energy of 60 meV. It can be applied to various fields, such as solar cells, degradation of the dye waste, the gas sensor. The photocatalytic activity of zinc oxide is varied according to the particle shape and change of crystallinity. Therefore, It is very important to specify the additives and the experimental variables. In this study, the zinc oxide were synthesized by using a microwave assisted hydrothermal synthesis. The precursor was used as the zinc nitrate, the pH value was controlled as 11 by NaOH. Surfactants are the ethanolamine, cetyltrimethylammonium bromide, sodium dodecyl sulfate, sorbitan monooleate was added by changing the concentration. The composite particles had the shape of a star-like, curcular cone, seed shape, flake-sphere. Physical and chemical properties of the obtained zinc oxide was characterized using x-ray diffractometer, field emission scanning electron microscopy, thermogravimetric analysis and optical properties was characterized using UV-visible spectroscopy, photoluminescence and raman spectroscopy.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.374-376
• /
• 1998

Effects of traditional fumigation (methyl bromide; MB) and combined fumigation (methyl bromide/phosphide; $MB/PH_3$) on the disinfestation, and phytotoxicity and longevity of cut flowers (lily and rose) were investigated. Combined fumigation with low concentrations of $7/3g/m^3\;(MB/PH_3$) at $10^{\circ}C$ immediately after transportation from harvested place was found to be much more effective in disinfestation of aphid, mite, and thrips than fumigation with $MB\;48g/m^3$ only at $20^{\circ}C$ after simulated transportation for 2 days. Quality and longevity of cut flowers measured after fumigation were better in flowers treated by combined fumigation ($7/3g/m^3,\;MB/PH_3$) at $10^{\circ}C$ for 2.5-3 hrs, irrespective of pretreatment with pulsing solution immediately after transporation, even though phytotoxicity varied with cut flowers fumigated. On the other hand, fumigation with $MB\;48g/m^3$ only at $20^{\circ}C$ after simulated transportation for 2 days showed tendency of enhanced insect disinfestation, but caused phytotoxicity to both lily and rose, regardless of pretreatment and moreover, reduced the longevity of the cut flowers.