• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.702-707
• /
• 2012

During the last few decades, toxic chemicals used in various industries have caused global pollution and the side products such as carbon dioxide and methane gas have contributed to global warming. Thus, it is desirable to develop new alternative solvents. It is well known that ionic liquids display a variety of environmentally friendly physical properties: nonvolatile, nonflammable, wide electrochemical windows, high inherent conductivities, wide thermal operating ranges, chemically inert, and limited miscibilities with organic solvents. Because of these characteristics, ionic liquids are promising candidates as solvents for synthetic chemistries, catalysis, and gas separations. In this study, we synthesized morpholiunium salts as N-ethyl-N-methylmorpholine Bromide, N-butyl-N-methylmorpholine Bromide, N-octyl-N-methylmorpholine Bromide, N-ethyl-N-methylmorpholine Tetrafluoroborate, N-butyl-N-methylmorpholine Tetrafluoroborate, N-octyl-N-methylmorpholine Tetrafluoroborate, N-ethyl-N-methylmorpholine Hexafluorophosphate, N-butyl-N-methylmorpholine Hexafluorophosphate, and N-octyl-N-methylmorpholine Hexafluorophosphate. The melting points, decomposition temperatures and electrochemical stabilities of the salts were measured by DSC, TGA, and CV, respectively. The salts with halide anion showed high melting points ($150{\sim}200^{\circ}C$), low decomposition temperatures ($200{\sim}230^{\circ}C$), narrow electrochemical stabilities (3.4~3.6 V). The synthesized salts with inorganic anions, on the other hand, presented low melting point ($50{\sim}110^{\circ}C$), high decomposition temperatures ($250{\sim}380^{\circ}C$), wide electrochemical stabilities (6.1~6.3 V). We also found that the properties depend on the length of the carbon chain.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.2
• /
• pp.179-190
• /
• 2010

The experiment was conducted to observe the effects of dried whole crop barley treated with cellulolytic microorganisms (Aspergillus niger KCCM 60357 and Bacillus licheniformis KCCM 40934) on the chemical composition, in vitro colonic fermentation and whole tract digestibility in swine. Whole crop barley were fermented with no microorganism addition (control), A. niger, B. licheniformis and co-culture of A. niger and B. licheniformis (Mixture) for 3 days at $30^{\circ}C$. In the feed chemical composition, CP contents of whole crop barley treated with A. niger (7.52%) and B. licheniformis (7.77%) were significantly higher than control (6.81%) (p<0.05). The in vitro colonic fermentation of dried whole crop barley fermented with control showed significantly higher $CH_4$ contents than A. niger, B. licheniformis and Mixture at 18h incubation (p<0.05). Dry matter (DM) digestibilities of A. niger (55%) and Mixture (57.42%) treatments were significantly higher than control (43.74%) (p<0.05). Ammonia-N was significantly increased in A. niger, B. licheniformis and Mixture relative to control at 24 hour incubation (p<0.05). Xylanase activities in A. niger, B. licheniformis and Mixture treatments were significantly higher than control at 24 hour incubation (p<0.05). Concentrations of total VFA were significantly increased in B. licheniformis (12.61 mM) at 24hour incubation (p<0.05). In vitro whole tract digestibility was significantly increased in B. licheniformis (49.61%) compared with the control (45.65%) (p<0.05). In conclusion, whole crop barley treated with cellulolytic microorganisms improved whole tract digestibility and colonic fermentation for swine.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.1
• /
• pp.59-74
• /
• 2012

Buffer solubility and protein fractionation were evaluated from the hays (timothy, alfalfa and klein) and straws (tall fescue and rice), and $In$ $vitro$ trial was conducted to examine the effect of buffer extraction on fermentation characteristics, degradability and gas ($CO_2$ and $CH_4$) production. Buffer soluble protein (SP) content and A fraction in total protein were highest in alfalfa hay as 61% and 41.77%, respectively while lowest in rice straw (42.8% and 19.78%, respectively). No difference was observed in B1 fraction among forages but B2 fraction was slightly increased in klein hay (12.34%) and tall fescue straw (10.05%) compared with other forages (6.34~8.85%). B3 fraction of tall fescue was highest as 38.49% without difference among other forages while C fraction was highest in rice straw. pH in incubation solution was higher in all forages after extraction than before extraction at 3h (P<0.01) and 6h (P<0.05), and pH from hays of timothy and alfalfa was higher than the other forages at 6h (P<0.05) and 12h (P<0.001). Regardless of extraction, ammonia-N concentration from alfalfa hay was increased at all incubation times and extraction effect was appeared only at 3h incubation time (P<0.01). Total VFA concentration from alfalfa hay was highest up to 24h incubation while those from tall fescue straw and rice straw were lowest. Buffer extraction decreased (P<0.01~P<0.001) the total VFA concentration. Acetic acid proportion was increased (P<0.001) before extraction of forages but no difference was found between forages. Propionic acid($C_3$) proportion was also increased(P<0.001) before extraction in all forages than in straws at 3h, 24h and 48h incubations, and $C_3$ from hays were mostly higher (P<0.05) than from straws. Butyric acid proportion, however, was not affected by extraction at most incubation times. Parameter 'a' regarding to the dry matter (DM) degradation was increase (P<0.001) in all forages before extraction, and was decreased (P<0.05) in tall fescue straw and rice straw compared with hays. Parameter 'b' was also increased (P<0.001) before extraction but no difference was found between forages. Effective degradability of DM (EDDM) was higher (P<0.001) before extraction in most forages except for rice straw. Buffer extraction decreased (P<0.05) all parameters (a, b, and c) regrading to the crude protein (CP) degradation but no difference was found between forages. Effective degradation of CP (EDCP) was lower (P<0.05) in straws than in hays. Parameters 'a' and 'b' regarding to the NDF degradation (P<0.01) and effective degradability of NDF (EDNDF, P<0.001) were also higher in forages before extraction than after extraction but no difference was found between forages. Buffer extraction reduced (P<0.05~P<0.001) $CO_2$ production from all the forages uo to 24h incubation and its production was greater (P<0.05~P<0.01) from hays than straws. Methane ($CH_4$) production was also greater (P<0.01~P<0.001) in all forages at all incubation times, and its production was greater (P<0.05) from hays than from straws at most incubation times. Based on the results of the current study, it can be concluded that buffer solubility and CP fractionation might be closely related with $In$ $vitro$ VFA concentration, degradability and gas ($CO_2$ and $CH_4$) production. Thus, measurement of buffer solubility and protein fractionation of forages might be useful to improve TMR availability in the ruminants.

• Food Science and Preservation
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2010

Four saponins (1~4) were isolated from Akebia quinata pericarp through bioassay-guided fractionation. Pericarps of A. quinata were extracted with ethanol and sequentially fractionated with dichloromethane, ethyl acetate, butanol and water. Compounds 1~4 from the butanol fraction were identified as 3-O-${\alpha}$-L-arabinopyranosyl hederagenin (${\delta}$-hederin), 3-O-${\alpha}$-L-rhamnopyranosyl (1${\rightarrow}$2) ${\alpha}$-L-arabinopyranoly oleanolic acid (${\beta}$-hederin), 3-O-${\beta}$-D-xylopyranosyl (1${\rightarrow}$3) ${\alpha}$-L-arabinopyranosyl hederagenin (saponin C), and 3-O ${\alpha}$-L-rhamnopyranosyl (1${\rightarrow}$2) ${\alpha}$-L-arabinopyranosyl hederagenin (${\alpha}$-hederin) based on the spectroscopic evidences, respectively. Oleanolic acid and hederagenin were identified as the corresponding sapogenins by acid-hydrolysis. These compounds exhibited strong cytotoxic activity in MTS [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxy-methoxyphenyl)-2-(4-sulfophenyl)-2H- tetrazolium, inner salt] assay on HepG2 cells. ${\beta}$-Hederin obviously attenuated the expression of bcl-2, an anti-apoptotic protein. All of the compounds also induced the activity of caspase-3, an apoptotic enzyme, while ${\alpha}$-hederin was the most potent activator of the enzyme. Our data demonstrate for the first time the apoptosis-inducing activity of A. quinata. These results suggest that A. quinata could be used as a potential source of natural cancer chemopreventive agents.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.127-127
• /
• 2017

우리나라 음식물 폐기물은 수분함량 및 유기물 함량이 높기 때문에 부패와 악취, 침출수의 원인이 된다. 하지만 이를 혐기 소화 처리한다면 구성성분에 따라 60-80%가 생분해되어(한국유기성폐자원학회, 2001) 친환경적으로 처리가능하고, 혐기소화 결과물로 발생한 메탄가스를 대체에너지로 사용할 수 있어 유기물을 효과적으로 처리할 수 있다. 그러나 유기성 폐기물은 계절 및 지역에 따라 구성성분의 비가 다르며, 성분 중 지방 함량이 많을 때 바이오가스 생산이 지연되어 생산효율 감소의 주된 원인이 된다(Kafle and Kim, 2013). 전국음식물 폐기물 중 지방함량이 높은 어육류의 발생량은 3차 조사(환경부, 2008)에 비해 2배 이상 증가하였고, 향후 음식 섭취의 서구화로 인한 육류 소비가 증가할 것으로 예상된다(환경부, 2013). 따라서 본 연구는 지방함량이 높은 유기물의 효율적 처리를 위해 지방산 종류에 따라 포화 불포화 지방산을 포함하는 부산물의 혐기소화 능력 및 바이오가스 생산 성능을 구명하는데 목적이 있다. 본 연구 결과, 불포화 지방산 함량이 높은 수준인 부산물의 바이오가스는 629.96-749.14 mL/g VS 이며, 포화 지방산 함량이 높은 수준의 부산물은 560.18-715.43 mL/g VS 였다. 불포화 지방산 함량이 25.31%-46.26%로 많아질수록 초기 순응기간은 13일에서 25일로 증가하였고, 총 바이오가스 생산량의 90%가 생산되는 기간인 T90은 57일에서 72일로 증가하여 바이오가스 생산 속도가 감소한 것으로 판단된다. 포화 지방산은 함량이 24.10-48.74%로 증가할수록 초기 순응기간의 변화는 없었고, T90은 69일에서 62일로 감소하였다. 또한 불포화 지방산이 많은 유기물은 모두 바이오가스 생산 과정에서 2단계의 지연현상을 보였지만, 포화지방산은 함량이 증가하여도 1단계의 지연현상을 보였다. 이러한 차이는 두 지방산에 관여하는 미생물의 차이(Diana, 2007)와 불포화 지방산의 굴곡된 형태가 지방산과 미생물이 상호 작용 방식에 악영향 미치기 때문으로 판단된다(Diana, 2013). 결론적으로, 두 지방산의 소화 방식은 차이가 있으며, 불포화 지방산 함량이 많은 유기물은 탄수화물 함량이 많은 유기물을 10% 이상 혼합하여 지연상을 감소시킬수 있다(Kim, 2017). 포화 지방산 함량이 많은 유기물은 초기 지연 현상 해결을 위한 연구가 추가적으로 요구된다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.15-21
• /
• 2017

In the present work, the synergistic effect of seaweed addition on organic acid production from sludge was investigated. The batch experiment was conducted at various mixing ratios of sewage sludge and seaweed (100:0, 75:25, 50:50, 25:75, 0:100 on a COD basis) under the substrate concentration of 20 g COD/L. The fermentation temperature was conducted under mesophilic condition ($35^{\circ}C$) and a heat-treated ($90^{\circ}C$ for 20 min) anaerobic digester sludge was used as a seeding source to suppress the methanogenic activity, The results showed that the amount of organic acid production increased as the content of seaweed increased: organic acids were 1.45, 3.22, 4.28, 5.24 and 4.82 g COD/L for the mixing ratio of 100:0, 75:25, 50:50, 25:75 and 0:100 respectively. The synergistic effect was calculated based on the organic acid production of individual sludge and seaweed, and was found to be 0.92, 1.14, 1.26 g COD/L at the mixing ratio of 75:25, 50:50 and 25:75, which indicates that 40% of synergy was obtained when 25% of seaweed was added. The synergistic effect could be ascribed to the high C/N ratio and biodegradability of seaweed.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.2
• /
• pp.121-127
• /
• 2016

BACKGROUND: Anaerobic digestion is the most feasible technology because not only the energy embedded in organic matters can be recovered, but also they are stabilized while being degraded. This study carried out to improve methane yield of slaughterhouse wastewater treatment sludge cake by the thermal pre-treatment prior to anaerobic digestion.METHODS AND RESULTS: Slaughterhouse wastewater treatment sludge cake was pre-treated by the closed hydrothermal reactor at reaction temperature of 190℃. BMPs (Biochemical methane potential) of the thermal hydrolysate was tested in the different S(Substrate)/I(Inoculum) ratio conditions. COD(Chemical oxygen demand) and SCOD(Soluble chemical oxygen demand) contents of thermal hydrolysate were 10.99% and 10.55%, respectively, then, the 96.00% of COD was remained as a soluble form. The theoretical methane potential of thermal hydrolysate was 0.51 Nm³ kg^-1-VS_added. And BMPs were decreased from 0.56 to 0.22 Nm³ kg^-1-VS_added when S/I ratio were increased from 0.1 to 2.0 in the VS content basis. Those were decreased from 0.32 to 0.13 Nm³ kg^-1-COD_added when S/I ratio were increased from 0.1 to 2.0 based on COD content. The anaerobic degradability of VS basis have showed 196.9%, 102.2%, 80.7%, 67.4%, and 39.4% in S/I ratios of 0.1, 0.3, 0.5, 1.0, and 2.0, respectively. Also the COD of 119.6%, 76.3%, 70.1%, 69.0%, and 43.1% were degraded anaerobically in S/I ratios of 0.1, 0.3, 0.5, 1.0, and 2.0, respectively.CONCLUSION: BMPs obtained in the S/I ratios of 0.1 and 0.3 was overestimated by the residual organic matters remaining at the inoculum. And inhibitory effect was observed in the highest S/I ratio of 2.0. The optimum S/I ratios giving reasonable BMPs might be in the range of 0.5 and 1.0 in S/I ratio. Therefore VS biodegradability of thermal hydrolysate was in 67.4-80.7% and COD biodegradability showed 69.0-70.1%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2018

Renewable energy has been of interests in the area of modern alternative fuels. Biogas is produced in waste landfill sites through anaerobic digestion processes, including hydrolysis, acidogenesis, organic acid fermentation (acetogenesis), and methane fermentation (methanogenesis). High contents of fine dust and moisture limited its utilization for direct combustion, town gas and vehicle fuel. Thus, this study proposed a new design for a cooling device using a centrifugal cyclone for simultaneous removal of fine dust and moisture as a pretreatment in the purification processes. A heat exchanger and an ID fan, which are installed inside and outside of the cyclone, in order to cool the humid gas below the freezing point and form a foggy mist. Such an atmosphere enhanced to capture fine dust as recirculating the cold mist flow. The water removal rate was 80.8% at a relative humidity of 95%, and the particle removal efficiency was 98.3% for $2.5{\mu}m$. Simultaneous removal efficiency was 70.8% and 99.6% for particle and moisture respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.417-427
• /
• 2000

The substrate metabolism and bacterial population in an anaerobic digestion with the submerged separation membrane were investigated by using a laboratory-scale reactor at the hydraulic retention time(HRT) 1.0 and 0.5 day. The removal efficiencies of carbohydrate at the HRT 1.0 and 0.5 day were 99.8~99.9% and 98.0~99.6%, respectively. After the 58 days, the mixed liquor volatile suspended solids(MLVSS) concentration at the HRT 1.0 and 0.5 day were approximately 6,050 and 7,750 mg/L, respectively. According to the measurement by the most probable number(MPN) method, the numbers of acidogenic bacteria, $H_2$-utilizing and acetate-utilizing methc.nogenic bacteria were found to be $10^9$, $10^7{\sim}10^8$ and $10^6{\sim}10^8MPN/mL$, respectively. The composition of $CH_4$ in the produced gas was 46~50%. It is suggested that sulfate-reducing bacteria $10^7{\sim}10^8MPN/mL$ play an important role in producing $H_2$ and acetate in sulfate-depleted environment.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.70-77
• /
• 2000

For hazardous air pollutants(HAP) such as NO, $NO_2$ and $SO_2$ decomposition efficiency, power consumption, and applied voltage were investigated by SPCP(Surface induced discharge Plasma Chemical Processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of HAP with various electric frequencies(5~50 kHz), flow rates(100~1,000 mL/min), initial concentrations(100~1,000 ppm) and additive($CH_4$) were measured and the products were analyzed with FT-IR. Experimental results showed that for the frequency of 10 kHz, the highest decomposition efficiency of 94.3 % for NO, 84.7 % for $NO_2$ and 99 % far $SO_2$ were observed at the power consumptions of 19.8, 20 and 19W, respectively, and that decomposition efficiency decreased with increasing frequency above 20 kHz. And decomposition efficiency per unit power were 5.21 %/W for $SO_2$, 4.76 %/W for NO and 4.24 %/W for $NO_2$ and the highest decomposition efficiency was observed with $SO_2$. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. When the additive of $CH_4$ was used, decomposition efficiency was increased with increasing $CH_4$ content, and NO, $NO_2$ and $SO_2$ were almost completely decomposed with the efficiency of 99 %, 98 % and 99 %, respectively and therefore $CH_4$ was a good additive material. The optimum power for the maximum decomposition efficiency were 7.5 W for $SO_2$, 9.5 W for NO and 15.5 W for $NO_2$, respectively. Optimum power with the maximum decomposition efficiency were 9.5 W at 1,000 ppm of NO, 7~8 W at 100~500 ppm of NO and 15.5 W at all concentration range of $NO_2$ and 11.5 W at 1,000 ppm, 4.9 W at 500 ppm, 3.7 W at 100~300 ppm of $SO_2$ and power efficiency was best in these case.