• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.255-263
• /
• 2006

Vol-oxidizer is a device to convert $UO_2$ pellets into $U_3O_8$ powder and to feed a homogeneous powder into a Metal Conversion Reactor in the ACP(Advanced Spent Fuel Conditioning Process). In this paper, we propose a design model of the vol-oxidizer, develop the new vol-oxidizer with a capacity of 20 kg HM/batch in $UO_2$ pellets, and conduct a verification for the device. Design considerations include the internal structure, the capacity, the heating position of the device, and the size. The dimensions of the new vol-oxidizer are decided by the design model. We determine a permeability test of the $U_3O_8$ measuring the temperature distribution, and the volume of $UO_2$ and $U_3O_8$. We manufactured the new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets, and then analyzed the characteristics of the $U_3O_8$ powder for the verification. The experimental results show that the permeability of the $U_3O_8$ throughout mesh enhance more than old vol-oxidizer, the oxidation time takes only 8 hours when compared with the 13 hours of the old device, and the average distribution of particle size is $40{\mu}m$. The capacities of new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets were agree well with the predictions of design model.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.9-25
• /
• 2020

As laser scan and photogrammetry are extensively applied to 3D modeling, the Retopology has become a critically important part in the 3D modeling process. However, abundant time would be wasted if the wrong method for retopology is employed. This paper aims to select the most suitable method and software for retopology for different types of models so as to increase the effectiveness of 3D modeling. In this paper, retopology is divided into three types according to the existed software for retopology in the market: manual, automatic and wrapping type, all of which are investigated by their characteristics of retopology and software in which they are applied individually. Then case production is employed on Static Mesh Skeletal Mesh and Hard Surface Modeling by the above mentioned three methods. The advantages and disadvantages of the software in which the above three methods can be applied are summed up, and the manual type produces good results, the automatic type is fast, and the wrapping type requires a pre-existing base mesh and the most suitable method for retopology for each type of 3D models is demonstrated. This paper provides reference for retopology and increases the effectiveness of 3D modeling.

• Health and Mission
• /
• s.27
• /
• pp.3-10
• /
• 2012

본 협회가 주관한 한국가톨릭병원협회 수도 성직자를 대상으로 일본 가톨릭계 병원 견학 및 성지순례가 2012년 4월 12일부터 19일까지 7박 8일 동안 9개 기관에서 사제 2명, 수녀 11명, 수사 1명, 협회 2명, 총 16명이 참석한 가운데 진행되었다. 병원 견학은 성프란치스코병원(나가사키현 나가사키시), 성마리아병원(나가사키현 고토시), 성마리아병원(후쿠오카현 구루메시)이었으며 나가사키, 소토메, 고토 지역 성지순례를 겸하고 돌아왔다.

• Electronics and Telecommunications Trends
• /
• v.17 no.1 s.73
• /
• pp.10-20
• /
• 2002

통합 메시징은 다양한 종류의 메시지 모두를 하나의 이용자 인터페이스로 가져와 모든 메시지에 대한 통지, 배달, 새로운 메시지의 송신, 그리고 수신 메시지에 대한 회신 및 포워딩을 제공하는 기술을 말한다. 통합 메시징 서비스가 현재 전세계적으로 유망한 차세대 통신 서비스로 가치를 인정 받고 있는 시점에서, 본 고에서는 2001년 정보통신부가 출연하여 수행한 50대 전략품목 조사분석 과제의 산출물인 통합 메시징 시스템 기술/시장 보고서의 일부분을 발췌하여 간략히 정리하였다.

• Electric Engineers Magazine
• /
• s.346
• /
• pp.24-29
• /
• 2011

피뢰설비 수뢰부시스템의 설치 위치는 보호각법, 메시법과 회전구체법 등의 방법에 따른다. 이 가운데 회전구체법이 피뢰설비에서 중요한 요소다. 따라서 적절한 피뢰설비의 계획 설계를 위해서는 회전구체법에 대한 이해가 필수다. 본고에서는 이를 위해 회전구체법의 변천과정과 기초이론을 소개하고, IEC규격에 기술되어 있는 회전구체법의 내용과 적용방법과 사례를 통해 설계 시공 감리 현장 실무자들이 회전구체법을 올바르게 이용할 수 있도록 관련정보를 제공하는데 목적이 있다.

• Electric Engineers Magazine
• /
• s.345
• /
• pp.18-23
• /
• 2011

피뢰설비 수뢰부시스템의 설치 위치는 보호각법 메시법과 회전구체법 등의 방법에 따른다. 이 가운데 회전구체법이 피뢰설비에서 중요한 요소다. 따라서 적절한 피뢰설비의 계획 설계를 위해서는 회전구체법에 대한 이해가 본고에서는 이를 위해 회전구체법의 변천과정과 기초이론을 소개하고 IEC규격에 기술되어 있는 회전구체법의 내용과 적용방법과 사례를 통해 설계 시공 감리 현장 실무자들이 회전구체법을 올바르게 이용할 수 있도록 관련정보를 제공하는데 목적이 있다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.164-168
• /
• 1999

HLA(High Level Architecture)는 분산 시뮬레이션의 표준화를 위한 개념적인 분산 시스템 프레임워크이며, RTI(Run Time Infrastructure)는 HLA를 따르는 분산 시뮬레이션들을 위한 네트워크 하부구조이다. 분산 시뮬레이션은 분산 노드간에 효율적이고 인과 오류가 없는 통신 방법의 지원이 필수적이며, RTI는 시뮬레이션에 참여하는 분산 노드간 메시지 전송을 위하여 최선(best-effort) 전송 서비스와 신뢰(reliable) 전송 서비스를 규정하고 있다. RTI의 메시지 전송 서비스는 기본적으로 메시지 전송 과정에서 메시기간 인과 관계를 유지해야 하는 다자간 통신 서비스이며, 본 논문에서는 인터넷상에서 인과 오류가 없는 다자간 통신을 위한 새로운 형식의 분산 시스템 구조를 제안하고, 성능 평가를 위한 실험 결과를 소개한다.

• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.943-953
• /
• 2013

By the enormous increase in mobile nodes and diverse service requests on wireless networks, wireless mesh network(WMN) takes an interest as the solution for such requests. However, lots of issues which should be solved to deploy WMN are still remained. In the network layer, the performance improvement of routing protocols is the major issue of nowadays researches. WMN can be easily deployed by use of protocols for mobile ad-hoc networks(MANET) because it is much similar with MANET in multi-hop wireless routing and which node plays as host and router concurrently. Unfortunately, most routing protocols for MANET have drawbacks such as large traffic overhead and long delay time for route discovery due to the network extension. They are major factors of performance degradation of WMN and most researches are focused on them. In this paper, domain-based AODV which is amended AODV to be applied in hybrid WMN is proposed. The proposed scheme divides a hybrid WMN as several domains and performs route discovery by header layer domain. Therefore it can reduce the distance for route discovery as much as average hop count between domain header and member nodes. From the simulation, domain-based AODV was showed slowly increasing delay time due to the network extension.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.131-139
• /
• 2013

To overcome the limitations in performance and power consumption of traditional electrical interconnection based network-on-chips (NoCs), a hybrid optical network-on-chip (HONoC) architecture using optical interconnects is emerging. However, the HONoC architecture should use circuit-switching scheme owing to the overhead by optical devices, which worsens the latency unfairness problem caused by frequent path collisions. This resultingly exert a bad influence in overall performance of the system. In this paper, we propose a new task mapping algorithm for optimizing latency by reducing path collisions. The proposed algorithm allocates a task to a certain processing element (PE) for the purpose of minimizing path collisions and worst case latencies. Compared to the random mapping technique and the bandwidth-constrained mapping technique, simulation results show the reduction in latency by 43% and 61% in average for each $4{\times}4$ and $8{\times}8$ mesh topology, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.99-105
• /
• 2012

ZigBee is the low power, low cost and low data rate wireless personal area network(LR-WPAN) standard. The Directed-Messaging is the protocol which improves the energy efficiency through reducing the redundant message transmission by transmitting messages with directional information toward the specified sub-network area in wireless sensor network using broadcasting. In this paper, we design and implement the experimental grid sensor network using ZigBee modified by the Directed-Messaging for the energy efficiency improvement. The experimental sensor network in this paper is configured with Nano24 supporting the ADV message and the routing management module modified to use the directional information. The energy efficiency improvement of the experimental sensor-network by evaluating the experimental results according to transmitting ADV message.