• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.361-363
• /
• 1997

Electronic devices are very weak against lightning surges injected from grounding systems and can be damaged. The malfunction and damage of electronic circuits bring about several disadvantages such as low operation performances, a lot of economical losses, and etc. In order to obtain the effective protection measure of electronic devices from overvoltages and lightning surges, the analysis of the transient grounding impedances is very important. The aim of this work is to evaluate the behaviors of transient grounding impedances under impulse currents and to investigate the effect of grounding lead wire. Z-t, Z-i and V-i curves of transient grounding impedance under impulse current waveforms have been measured and analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1578-1582
• /
• 1998

The ground potential rise generated by the switching surge or lightning stroke may be dangerous to personnel and cause damage to electronic control parts. For a first step to the transient performance analysis. high frequency impedances of grounding grids have been calculated and discussed. Grounding grids include 7 square grids from $10m{\times}10m$ to $80m{\times}80m$. The high frequency current was injected into the center and a corner of the grounding grid. The calculation results indicate that the impedance of the grounding grid is significantly influenced by frequency and the point of injection of the current. and the effective radius of a large grounding grid may be represented in $15{\sim}20m$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.29-33
• /
• 2002

There are a lot of errors and little accuracy when calculating the grounding resistance with the transposition methods in the equivalent surface of hemisphere electrode. Therefore we should calculate the grounding resistance by using the mesh factor, In this paper, we would estimate the grounding value of mesh electrode with water tank model & estimation method using the reduced scale ratio of mesh electrode based on the theory of model electrode & proportional factor according to the reduced scale ratio. And also we have confirmed the accuracy of the empirical formula of model electrode by using the regression analysis.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.349-354
• /
• 2005

Recently, there are many equipment of electricity, electronics, and communication which need to grounding in the building. When the electric current flows into a certain grounding system in the same building, the potential rise of other grounding system is possible to be affected by its potential rise. This potential interference was affected by the surface potential, it is deeply related whit the electrode shape. In this paper, basic formula is deduced on the basis of both electrodes surface potential of grounding electrode in a source of the potential interference and groundidng electrode which receive the potential interference. Therefore the degree of potential interference as multiple groundidng electrode can be verified the simulated results by means of the simple model in advance. This is for investigating the grounding resistance of grounding electrodes, the experiment was performed with model-scale of the grounding system and the scaled model grounding system was to this experiment using a water tank of a stainless steel-hemisphere shape. since mesh electrodes have been widely in the general building, we're tried to analyze that this water tank model and it's simulation as well.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.50-55
• /
• 2008

RF plasma CVD법을 이용하여 금속 촉매(Fe)가 증착된 $SiO_2$ 기판 위에 $H_2$와 $C_2H_2$의 혼합가스를 사용하여 증착된 탄소나노튜브(carbon nanotube, CNT)의 특성에 대한 기판의 온도의 영향을 조사하였다. $SiO_2$ 위에 철 촉매는 RF 마그네트론 스퍼터에 의해 만들어졌다. 고 순도의 나노튜브 박막을 얻기 위해서 기판 홀더 위에 접지된 그리드 메쉬 커버를 설치하였다. 증착된 CNT의 표면 미세구조 및 화학적 구조를 SEM, Raman, XPS, 그리고 TEM으로 측정하였다. 증착된 CNT 박막들은 대나무 같은 다중벽 구조를 가지는 탄소 파이버 형태였으며 $55^{\circ}C$에서 보다 $600^{\circ}C$에서 보다 더 치밀한 구조를 보이나 $650^{\circ}C$에서는 밀도가 다소 감소함을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제15권3호
• /
• pp.25-34
• /
• 2001

본 논문에서는 방전관을 채용하여 전기적 기체방전의 중침을 이용한 새로운 방전형식의 환경개선용 오존발생 기술을 개발하였다. 방전관형 오존발생기(DLO)는 설치된 3개의 전극중 접지전극인 중심전극으로 방전관을 사용 하였으며, 나머지 2개의 메쉬형 내부전극과 나선형 외부전극에 180[$^{\circ}$]의 위상차를 가진 2개의 교류고전압 전원을 인가함으로써 방전관과 내부전극, 방전관과 외부전극사이의 방전공간에서 각각 발생되는 무성방전의 중침에 의하여 오존이 발생되는 구조이다. 이때, 원료가스의 유량, 방전전력 및 DLO의 사용 개수 변화에 따른 방전특성과 오존생성특성을 연구검토하였으며, DLO로부터 생성된 오존을 대기오염물질인 NO 가스에 접촉시켰을 때 NO 제거특성이 우수하여 방전관형 오존발생기가 대기환경개선 설비로 적용가능함을 확인하였다.