• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.423-434
• /
• 2007

Vehicular ad-hoc network (VANET), a kind of mobile ad-hoc network (MANET), is a key technology for building intelligent transportation system (ITS). VANET is automatically and temporarily established through vehicle-to-vehicle communication without network infrastructure. It has the characteristics that frequent changes of network topology and node density are occurred and messages are disseminated through several relay nodes in the network. Due to frequent change of network topology and node density, however, VANET requires an effective relay node selection scheme to disseminate messages through the multi-hop broadcast. In this paper, we propose a contention window based multi-hop broadcast scheme for VANET. Each node has an optimized contention window and competes with each other for a relay node. The experimental results show that the proposed scheme has a better performance than the distance-based deterministic broadcast scheme in terms of message propagation delay and network traffic.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.113-114
• /
• 2023

본 논문은 다양한 방향성과 멀티 홉을 고려하여 최적의 콘텐츠 제공을 위한 릴레이 차량 선택 방안을 제안한다. 도로변 기지국의 제한성으로 인해 자율 주행 차량에 탑승한 승객들이 콘텐츠를 충분히 전달받는 데에 있어서, 지연시간과 버퍼링 등의 문제가 발생할 수 있다. 따라서, 도로변 기지국의 보조를 위하여 주위의 다른 차량들을 활용하여 요청된 콘텐츠를 원활하게 제공할 수 있다. 하지만, 기존 방안들은 한 대 또는 너무 많은 차량을 무분별하게 선택함으로써 최적화된 성능을 도출할 수 없었다. 그러므로, 본 논문은 요청 차량과 같은 방향으로 이동하는 1 차 릴레이 차량을 선발하는 데에 있어서 반대쪽에서 오는 2 차 릴레이 차량의 사전 캐싱량을 활용하는 방안을 제안한다. 1차 릴레이 차량의 충분한 요청 차량과의 연결 시간에 비교하여 부족한 사전 캐싱량을 2 차 릴레이 차량들로 보충함으로써 지연시간과 버려지는 패킷을 최소화할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.580-581
• /
• 2018

In order to reduce end-to-end delay in EH-WSN (energy harvestin wireless sensor netowk), medium access control protocols using multi-hop routing technique have been studied. In a real environment, there are many situations where it is difficult to harvest enough energy than the energy consumed. Therefore, it is required to design a MAC protocol that allows nodes to reliably relay data without exhausting power in multi-hop transmission. In this paper, we propose a power-efficient MAC protocol that can select the relay node according to the residual power and the energy collection rate to increase network lifetime.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.21-31
• /
• 2014

In this paper, we propose VLC(visible light communication) based multi-hop multimedia data transmission system. The main contributions and features of the proposed system are as follows. First, the contribution of this research is to develope the LED communication based multi-hop transmission network system which can transmit multimedia data(audio data, video data) with long distance. Second, the developed system has the following features: In transmitter, audio data and video data are transmitted via multi-hops using two channels. The relay in audio channel receives digital audio signal by using photo diode and then transmits the signal to receiver after error checking and amplifying. The receiver receives the encoded audio data via photo diode and then converts to analog audio signal by using decoding and amplifying. The relay in video channel receives video signal by using photo diode and then amplify the video signal using OP-AMP and then transmits the signal to receiver. The receiver amplifies the received signal from photo diode and then sends it to the monitor. The performance evaluation of the proposed system is conducted in the laboratory with fluorescent light source. The results of the performance evaluation confirm that the system can provide high quality multimedia data transmission from transmiter to receiver via multi-hop relays in a long distance while we can see there are differences in the transmitted multimedia(audio and video) quality according to the used LED colors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.17-22
• /
• 2013

In this paper, we propose a multi-hop cooperative transmission protocol over Rayleigh fading channels. In the proposed protocol, the multi-hop cooperative transmission is used to improve the system performance. Due to broadcast nature, we do not limit the receiving node to be only the next node, but the destination and all the nodes between the transmitting node and the destination. The proposed protocol can hence save the average transmit power, compared with multi-hop direct transmission protocol due to the skipped transmissions from some intermediate nodes or chosen relays. The proposed scheme is implemented and evaluated in mobile ad-hoc wireless networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.330-335
• /
• 2007

This paper proposes a multichannel random access channel allocation scheme for multihop cellular networks to guarantee the stable throughput of a random access. The fundamental contribution is a mathematical formula for an optimal partition ratio of shared random access channels between a base station and a relay station. In addition, the proposed scheme controls the retransmission probability of random access packets under heavy load condition. Simulation results show that the proposed scheme can guarantee the required random access channel utilization and packet transmission delay even if the a random access packet arrival rate is higher than 0.1.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.182-189
• /
• 2016

In this paper, we propose a buoy system based on multi-hop relay networks for ocean observation. The proposed system consists of various sensor modules, a gateway, wireless communication modules, and a remote monitoring site. The sensor modules are integrated with various communication interfaces and connected to the gateway of the proposed buoy system with an unified protocol based on controller area network (CAN)-bus. In order to communicate with the remote monitoring site and extend the coverage, the proposed system uses long-term evolution (LTE) router and XBee mesh network modules. The field test results show that the proposed system can extend the coverage using the proposed multi-hop relay network.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.192-206
• /
• 2008

Multihop is the main communication style for wireless sensor networks composed of tiny sensor nodes. Until now, most applications have treated the periodic small sized sensing data. Recently, the burst traffic with the transient and continuous nature is increasingly introduced due to the advent of wireless multimedia sensor networks. Therefore, the efficient communication protocol to support this trend is required. In this paper, we propose a novel PIGAB(Packet Interval Gap based on Adaptive Backoff) protocol to efficiently transmit the burst data in multihop wireless sensor networks. The contention-based PIGAB protocol consists of the PIG(Packet Interval Gap) control algorithm in the source node and the MF(MAC-level Forwarding) algorithm in the relay node. The PIGAB is on basis of the newly proposed AB(Adaptive Backoff), CAB(Collision Avoidance Backoff), and UB(Uniform Backoff). These innovative algorithms and schemes can achieve the performance of network by adjusting the gap of every packet interval, recognizing the packet transmission of the hidden node. Through the simulations and experiments, we identify that the proposed PIGAB protocol considerably has the stable throughput and low latency in transmitting the burst data in multihop wireless sensor networks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.82-91
• /
• 2009

Routing (or path selection) is one of the key issues of multi-hop relay networks such as the IEEE 802.16j. Moreover, the allocation of appropriate resource such as bandwidth should not only be made in accordance with the paths selected, but the utilization of radio resource of an entire cell should also be maximized. Due to this interdependency between the problems of resource allocation and routing, it is desired these two problems are addressed simultaneously. In this paper, we propose a joint resource allocation and routing scheme for an OFDMA-based multi-hop cellular system. This scheme uses a polynomial time heuristic algorithm called Multi-Dimensional Multi-choice Knapsack Problem (MMKP) in order to find an approximate solution maximizing the total downlink throughput. In the simulation results, we show that the proposed scheme finds a sub-optimal solution which is superior to a link quality-based routing scheme, but slightly worse than the optimal solution.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.