• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제31권3호
• /
• pp.199-207
• /
• 2013

In hydrographic survey, data surveyed with multibeam system includes various errors due to multiple factors. These are corrected by a calibration called patch test, and if existing method is used, the test needs to be conducted for about 8 times for precise system calibration. For more prompt and precise multibeam system calibration, the exact offset of a ship was determined using terrestrial laser scanning and TS surveying, which was used as the initial input for the patch test. In the result, the error of closure was 0.001 m or less for TS surveying and backsight error was 0.005 m or less for scanning. All the surveying data based on the same local coordinate was converted into vessel reference coordinate during which R-square for all rotation angles was 0.99 or higher and standard deviation was 0.008 m or less. Finally, in a patch test using calculated offset of sensors and motion sensor offset, the offset of MBES transducer satisfied manual on hydrography only with 1-time calibration. With these results, it is thought that terrestrial laser scanning and TS surveying can fully be utilized for multibeam system calibration.

• Smart Media Journal
• /
• 제5권1호
• /
• pp.9-14
• /
• 2016

Although the ocean observation and exploration equipment is necessary for the oceanographical observation and strengthening influence of the nation and the resource preemption, it depended on the oversees adoption rather than the domestic development. The MBESs were developed for seabed topography, sedimentary distribution information and underwater objects exploration, but there is no domestic production. So in this research we try the localization of the marine acoustic sounder. Especially about correcting the error occurred on the hardware, we confirmed it on software.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2000년도 춘계 학술대회 논문집 통권 3호 Proceedings of the 2000 KSRS Spring Meeting
• /
• pp.166-171
• /
• 2000

밀티빔 음향 측심기 (Multibeam Echo Sounder)는 탐사선에 수직방향으로 해저면을 주사(Swath)하여, 한번의 송수신(Ping)으로 다중의 빔자료를 얻을 수 있는 측심기로, 해저면에 반사되어 되돌아오는 음파의 음압을 기록하고, 사이드 스캔 소나 자료도 동시에 취득하는 기능을 가지고 있으므로, 측심된 해저 지형(Bathymetry)과 해저 지형을 덮고 있는 해저면의 퇴적 상황(Sediment Environment)도 동시에 얻을 수 있는 다목적 측심기이다. 본 논문에서는 L3사의 Sea Beam 2100 멀티빔 음향 측심기를 통해 얻은 자료를 처리하여, 3차원 공간 데이터인 DEM(Digital Elevation Model)을 생성하고, VRML을 이용한 웹상에서의 해저 지형 가시화를 통해, 세계 어느 곳에서나 웹을 통하여 쉽게 정보를 공유할 수 있는 3차원 해저 지리 정보 시스템의 구현을 목적으로 한다. 멀티빔 음향 측심기를 통해 얻어진 자료는 항해 자료 보정, 음속 보정, 빔 좌표 계산과 분리, 오측심 자료 제거, 조석 보정 등의 단계를 거쳐 측심자료의 정확도 및 신뢰도를 높이는 과정을 거치게 된다. 보정된 멀티빔 음향 측심자료는 무작위 점 사상(Point Topology)으로 산재 되어 있는 빔 자료를 임의의 단위영역으로 변환하는 과정을 거쳐야 하는데, 이 과정을 격자화라고 한다. 자료의 격자화를 통해 3차원 공강 데이터인 DEM 파일을 제작하고, 이 DEM 파일과 음압 영상을 이용해 웹상에서의 3차원 해저 지형의 가시화를 실현한다. 웹상에서의 3차원 지형 가시화에서 방대한 양의 지형 데이터는 데이터 전송 시간과 렌더링 시간에 치명적인 문제이다. 따라서, 렌더링 시간과 데이터 전송 시간을 단축시키기 위한, 지형 자료의 LOD(Level of Detail)를 통해, VRML을 이용한 보다 효과적인 웹상에서의 3차원 해저 지형의 가시화를 실현한다.면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technological effects. Since the HAN projects consists of 18 subprograms, it is difficult In evaluate all the subprograms simultaneously. Despite, each program is being performed under the category of HAN projects, so the common soci

• Water for future
• /
• 제55권12호
• /
• pp.18-24
• /
• 2022

• The Journal of the Acoustical Society of Korea
• /
• 제29권1호
• /
• pp.24-33
• /
• 2010

This paper proposes a technique of sound beamforming that can generate high-directive sound beams, and this paper also presents applications of the proposed algorithm to multi-channel 3D sound systems. The proposed algorithm consists of two phases: first, optimum weights maximizing a sound pressure level ratio between the target and control acoustic regions are designed, and later, the directivity of the pre-designed sound beam is iteratively enhanced by modifying the covariance matrix. The proposed method was evaluated under various situations, and the results showed that it could provide more focused sound beams than the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제34권11A호
• /
• pp.891-897
• /
• 2009

In the satellite communications, the frequency sharing with other services is important because the service coverage is generally very wide and overlaps with those of other wireless services. This paper introduces a new technique to mitigate interference into the terrestrial stations from the Earth station in the same frequency band by means of band segmentations which are portions of the overall operation frequency band divided by frequency reuse factor. We consider a multi-beam satellite system, where frequency bands are reused in each satellite cell. The terrestrial stations use band segmentations of adjacent satellite cells, and this may decrease the interferences. By this way, the terrestrial and satellite systems can share the same frequency bands efficiently. The simulation is performed at frequency reuse factors, seven and three. The simulation results show that the proposed method can highly reduce the interference level to -168 dBW or -163 dBW depending on the considered frequency reuse factor from -117 dBW at the 90% link availability.

• Korean Journal of Optics and Photonics
• /
• 제16권3호
• /
• pp.235-238
• /
• 2005

A Multiple electron beam lithography system with arrayed microcolumns has been developed for high throughput applications. The small size of the microcolumn opens the possibility for arrayed operation on a scale commensurate. The arrayed microcolumns based on of Single Column Module (SCM) concept has been fabricated and successfully demonstrated. Low energy microcolumn lithography has been operated in the energy range from 250 eV to 300 eV for the generation of nano patterns. Probe beam current at the sample was measured about >1 nA at a total beam current of $0.5\;{\mu}A$ and a working distance of $\~1\;mm$. The magnitude of probe beam current is strong enough for the low energy lithography. The thin layers of PMMA resist have been employed. The results of nano-patterning by low energy microcolumn lithography will be discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제39A권5호
• /
• pp.251-257
• /
• 2014

Digital RDA system is retransmit into the opposite direction of the incident signals. Digital RDA system have a disadventage that this system do not signal classification in multipath environment. because multipath signal is shown as vector sum of multipath signal, digital RDA system required complex signal process for multipath signal classification. In this paper, to solve these problem we propose hybrid digital RDA system which combination of the MUSIC algorithm and the digital RDA system. Proposed system has two modes. First mode is digital RDA mode. Secornd mode is digital beamforming mode. Digital RDA mode is used in situations where the less the impact of multipath. Digital beamforming mode is applied to multipath effects is greater. In secornd mode, we find optimal path using MUSIC algorithm. After than the proposed system uses only the optimal path. Through the proposed system in a multipath environment with digital RDA can be used to supplement a disadvantage.

• Laser Solutions
• /
• 제18권4호
• /
• pp.12-16
• /
• 2015

The research on multi electron beam systems is being carried out by various methods. We are studying multi electron beam system using miniaturized electron beam columns. The column consists of electrostatic lenses, electrostatic deflector and tip emitter. Our operating system controls 4 column array, captures images of each column and maintains the instrument. We present the usefulness of our operating system for multi columns by capturing images of each column.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제7권4호
• /
• pp.667-672
• /
• 2003

Smart antennas will be used mon widely for the higher data rate and the larger number of users as the demand of wireless multimedia service is increased. Therefore, the BER performance is analyzed in this paper for DS-CDMA and MC-CDMA systems using smart antennas. A reverse link channel is simulated assuming the frequency selective Rayleigh fading. The simulation results are presented based on the characteristics of DS-CDMA and MC-CDMA systems according to the signal spectrum bandwidth and the method of adaptive beamforming. The BER performances of both systems are improved as the beam width of smart antennas is decreased. Also, it is shown that the performance of MC-CDMA system is much better than that of DS-CDMA system as the number of users is increased.