• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.6
• /
• pp.644-661
• /
• 1999

인터넷에서 통합서비스를 제공하기 위해서는 종단간 다양한 QoS를 지원해야 하는데 이를 위해서는 인터넷뿐 아니라 종단 사용자와 인터넷을 연결하는 랜에서의 QoS 지원이 필요하다. 이에, IETF는 특정 링크 계층으로 구성되는 서브넷에서 QoS 지원을 위한 기본 골격을 제안하였다. 그런데 , 매체 접근방식에 따라 서브넷이 제공할 수 있는 서비스의 정도가 크게 달라지기 때문에 실제로 IS802 모델을 특정서브넷에 구현하기 위해서는 이에 대한 고려가 필요하다. 본 논문에서는 통합서비스를 지원하기 위한 기반이 되는 서브넷 차원에서의 우선순위 지원을 목표로 IS802 모델을 전통적인 이더넷과 토큰링에 적용하여 보았다. 먼저, IS802 모델의 대역폭관리자를 적용한 이더넷 IS모델과 토큰링_IS 모델의 구현을 제안하고 특별히, 이더넷의 경우 매체 접근 방식의 특성상 IS802 모델의 적용만으로는 서브넷차원에서의 우선순위에 따른 전송을 지원할 수 없기 때문에 이를 보완하기 위한 페이즈 모델을 추가로 제안하였다. 시뮬레이션을 통해 기존의 전통적인 이더넷과 토큰링 및 새롭게 표준화된 IS802 모델을 적용한 이더넷 _IS와 토큰링 _IS, 그리고 페이즈 모델간의 성능을 비교하였다. 시뮬레이션결과 토큰링의 경우 단순한 입장 제어에 의해서도 QoS 지원 정도가 크게 향상될수 있음을 볼 수 있었다. 또한 , 페이즈 모델의 경우 이더넷의 매체 접근 방식을 상당히 보완함으로써 QoS 지원 정도가 크게 향상될 수 있음을 볼 수 있었다. 또한, 페이즈 모델의 경우 이더넷의 매체 접근 방식을 상당히 보완함으로써 QoS 지원을 요구하는 플로우에대해서는 전통적인 이더넷이나 이더넷_IS 비해 훨씬 안정적인 서브넷 차원의 우선순위지원 서비스를 제공할 수 있음을 확인할 수 있었다.제공하는 멀티미디어 동기화 편집기와 변환기 및 상영기를 ScriptX를 이용하여 Windows95 상에 구현하였다.기 위한 간단한 例를 들어 봄으로써 이 글을 쓰는 동기으 일면을 대신하고자 한다.置함으로 이것을 Multi-Drop(points) system으로 swiching System을 利用 Mini-Network을 構成할 수도 있다.크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해 볼때 사산(死産)은 모성(母性)의 임신력(姙娠歷)

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.659-665
• /
• 2017

In this paper, a low complexity fast Fourier transform(FFT) processor is proposed for multiple input multiple output(MIMO) systems. The IEEE 802.11ac standard has been adopted along with the demand for a system capable of high channel capacity and Gbps transmission in order to utilize various multimedia services using a wireless LAN. The proposed scalable FFT processor can support the variable length of 64, 128, 256, and 512 for 8x8 antenna configuration as specified in IEEE 802.11ac standard with MIMO-OFDM scheme. By reducing the required number of non-trivial multipliers with mixed-radix(MR) and multipath delay commutator(MDC) architecture, the complexity of the proposed FFT processor was dramatically decreased. Implementation results show that the proposed FFT processor can reduced the logic gate count by 50%, compared with the radix-2 SDF FFT processor. Also, compared with the 8-channel MR-2/2/2/4/2/4/2 MDC processor and 8-channel MR-2/2/2/8/8 MDC processor, it is shown that the gate count is reduced by 18% and 17% respectively.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.191-210
• /
• 2009

Internet was first designed only for sending data, but as the time passed, internet started to evolve into a broadband multi-media web that is capable of transmitting sound, video, high-capacity data and more due to the demands of internet users and the rapid changing internet-communication technology. Domestically, in January, 2000 Saerom C&T, launched a free VoIP, but due to limited ways of conversation(PC to PC) and absence of a revenue model, and bad speech quality, it had hit it's growth limit. This research studied VoIP based on technological enhancement in super-speed internet. According to IDC, domestic internet market's size was 80,800 million in 2008, and it formed a percentage of 12.5% out of the whole sound-communication market. in case of VoIP, it is able to maximize it's profit by connecting cable and wireless network, also it has a chance of becoming firm-concentrated monopoly market by fusing with IPTV. Considering the fact that our country is insignificant in MVNO revitalization, regulating organizations will play a significant roll on regulating profit between large and small businesses. Further research should be done to give VoIP a secure footing to prosper and become popularized.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.69-78
• /
• 2017

Shannon of the 5G smartphone and Fourier of the signal processing meet in the sampling theorem (2 times the highest frequency 1). In this paper, the initial Shannon Theorem finds the Shannon capacity at the point-to-point, but the 5G shows on the Relay channel that the technology has evolved into Multi Point MIMO. Fourier transforms are signal processing with fixed parameters. We analyzed the performance by proposing a 2N-1 multivariate Fourier-Jacket transform in the multimedia age. In this study, the authors tackle this signal processing complexity issue by proposing a Jacket-based fast method for reducing the precoding/decoding complexity in terms of time computation. Jacket transforms have shown to find applications in signal processing and coding theory. Jacket transforms are defined to be $n{\times}n$ matrices $A=(a_{jk})$ over a field F with the property $AA^{\dot{+}}=nl_n$, where $A^{\dot{+}}$ is the transpose matrix of the element-wise inverse of A, that is, $A^{\dot{+}}=(a^{-1}_{kj})$, which generalise Hadamard transforms and centre weighted Hadamard transforms. In particular, exploiting the Jacket transform properties, the authors propose a new eigenvalue decomposition (EVD) method with application in precoding and decoding of distributive multi-input multi-output channels in relay-based DF cooperative wireless networks in which the transmission is based on using single-symbol decodable space-time block codes. The authors show that the proposed Jacket-based method of EVD has significant reduction in its computational time as compared to the conventional-based EVD method. Performance in terms of computational time reduction is evaluated quantitatively through mathematical analysis and numerical results.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.843-850
• /
• 2004

As mobile devices prevail, requests for various services using mobile devices have increased. Requests for application services that require large data space such as multimedia, game and database [1] specifically have greatly increased. However, mobile appliances have difficulty in applying various services like a wire environment, because the storage capacity of one is not enough. Therefore, research (5) which provides remote storage service for mobile appliances using iSCSI is being conducted to overcome storage space limitations in mobile appliances. But, when iSCSI is applied to mobile appliances, iSCSI I/O performance drops rapidly if a iSCSI client moves from the server to a far away position. In the case of write operation, $28\%$ reduction of I/O performance occurred when the latency of network is 64ms. This is because the iSCSI has a structural quality that is very .sensitive to delay time. In this paper, we will introduce an intermediate target server and localize iSCSI target to improve the shortcomings of iSCSI performance dropping sharply as latency increases when mobile appliances recede from a storage server.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.916-925
• /
• 2009

4S (Ship to Ship, Ship to Shore) communication is the key to strategic development of e-navigation, a core element of IT vessel convergence. 4S communication is intended to integrate and standardize various communication infrastructures on land and communication equipment complying with communication equipment equipped in ships. This paper aims to apply the Korean technology IEEE 802.16e adopted as an international standard, to replace and compensate for existing vessel communication media such as low speed HF/MF/VHF to the ocean environment. To this end, various experimental conditions between the coast station where a relay station was installed and related equipment equipped on a ship are set. Communication signals were monitored and the RSSI and CINR were measured. Based on experimental analysis and results, various challenges and solutions which may occur in ocean environment were sought, and communication availability was analyzed through transmission data throughput, at the maximum effective distance range of the signal. It was proven that high speed multimedia data could be exchanged for up to 20 km even among 80km kph ships moving around near the sea, ensuring that this technology could be applied to the ocean environment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.629-638
• /
• 2005

In the System on a Chip design, the on chip bus is one of the critical factors that decides the overall system performance. Especially, in the case or reusing the IPs such as processors, DSPs and multimedia IPs that requires higher bandwidth, the bandwidth problems of on chip bus are getting more serious. Recently ARM proposes the Multi-Layer AHB BusMatrix that is a highly efficient on chip bus to solve the bandwidth problems. The Multi-Layer AHB BusMatrix allows parallel access paths between multiple masters and slaves in a system. This is achieved by using a more complex interconnection matrix and gives the benefit of increased overall bus bandwidth, and a more flexible system architecture. However, there is one clock cycle delay for each master in existing Multi-Layer AHB BusMatrix whenever the master starts new transactions or changes the slave layers because of the Input Stage and arbitration logic realized with Moore type. In this paper, we improved the existing Multi-Layer AHB BusMatrix architecture to solve the one clock cycle delay problems and to reduce the area overhead of the Input Stage. With the elimination of the Input Stage and some restrictions on the arbitration scheme, we tan take away the one clock cycle delay and reduce the area overhead. Experimental results show that the end time of total bus transaction and the average latency time of improved Multi-Layer AHB BusMatrix are improved by $20\%\;and\;24\%$ respectively. in ease of executing a number of transactions by 4-beat incrementing burst type. Besides the total area and the clock period are reduced by $22\%\;and\;29\%$ respectively, compared with existing Multi-layer AHB BusMatrix.

• Journal of KIISE:Software and Applications
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2008

This paper detected the characteristics of motion vector to support efficient content -based video search of video. Traditionally, the present frame of a video was divided into blocks of equal size and BMA (block matching algorithm) was used, which predicts the motion of each block in the reference frame on the time axis. However, BMA has several restrictions and vectors obtained by BMA are sometimes different from actual motions. To solve this problem, the foil search method was applied but this method is disadvantageous in that it has to make a large volume of calculation. Thus, as an alternative, the present study extracted the Spatio-Temporal characteristics of Motion Vector Spatio-Temporal Correlations (MVSTC). As a result, we could predict motion vectors more accurately using the motion vectors of neighboring blocks. However, because there are multiple reference block vectors, such additional information should be sent to the receiving end. Thus, we need to consider how to predict the motion characteristics of each block and how to define the appropriate scope of search. Based on the proposed algorithm, we examined motion prediction techniques for motion compensation and presented results of applying the techniques.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.1-12
• /
• 2003

Recently, many researches into distributed processing on Internet, and multimedia data processing have been performed. Rapid and convenient multimedia services supplied with high quality and high speed are to be needed. In this paper, we design and implement clip-based video retrieval system on the Web enviroment in real-time. Our system consists of the content-based indexing system supporting convenient services for video content providers, and the Web-based retrieval system in order to make it easy and various information retrieval for users in the Web. Three important methods are used in the content-based indexing system, key frame extracting method by dividing video data, clip file creation method by clustering related information, and video database construction method by using clip unit. In Web-based retrieval system, retrieval method ny using a key word, two dimension browsing method of key frame, and real-time display method of the clip are used. In this paper, we design and implement the system that supports real-time display method of the clip are used. In this paper, we design and implement the system that supports real-time retrieval for video clips on Web environment and provides the multimedia service in stability. The proposed methods show a usefulness of video content providing, and provide an easy method for serching intented video content.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1113-1122
• /
• 2004

This paper is basically to achieve the high-availability and high-reliability of the control system from the implementation of the fault-tolerant system using the hot-standby sparing technique. To meet the objective, we design and implement a board with fault tolerance I/O bus to detect the fault. Warm-standby sparing technique is the fault tolerance technique usually used for switching control system in present. This technique can be easily implemented, but can not detect the fault quickly and can malfunction because of the hardware fault. The hot-standby sparing fault tolerant technique implemented in this paper is consists of dual processor modules and a I/O processor using fault tolerant I/O bus. The proposed method can find the faults as soon as possible, so it can prevent from wrong operation. Also it is possible to normal re-service due to the short recovering time. To implement the fault-tolerant dual system with fault detection be, two daughter, called FTMA and FTIA, boards designed and implemented are applied to the system. And we also simulated the proposed method to verify the high-availability and high-reliability of the control system using Markov process.