• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.365-372
• /
• 2004

The purpose of this study was to implement HACCP system to foodservice of W and D elementary schools with joint-lunch management system in Kyungsan area. Steamed rice with squid was selected and Control Action, Monitoring Procedure and Control measure were identified based on HACCP flowchart to produce safe and healthy food. It was suggested that frozen squid must be thawed under the cold running city water and kept temperature below 1$0^{\circ}C$ and receiving/thawing procedure has to be done within 30 min. Raw vegetables must be washed under three-tube wash stand and whole prepreparation procedures should be done in 20 minutes. Clean and sanitize all the equipment and utensils before and after handling squid. Knives and cutting boards for vegetable and squid should be classified. Sauce for steamed rice with squid should be heated about 21 minutes to reach the temperature of 94$^{\circ}C$ before serving and internal temperature of food must be kept above 84.4$^{\circ}C$ during serving. The ideal temperature of kitchen should be remained 15∼18$^{\circ}C$. The underground water has to be excluded to minimize the risk of contamination in the foodservice facility and the prepreparation place must be separated with cooking place. Also, Personal hygiene Practice should be check in each stage. Further, additional research needs to be conducted to determine models for HACCP implementation for different menu.

• Korean Journal of Cognitive Science
• /
• v.20 no.4
• /
• pp.507-533
• /
• 2009

This paper examines the time course and processing patterns of filler-gap dependencies in Korean relative clauses, using an eyetracking method. Participants listened to a short story while viewing four pictures of entities mentioned in the story. Each story is followed by an auditorily presented question involving a relative clause (subject relative or dative relative). Participants' eye movements in response to the question were recorded. Results showed that the proportion of looks to the picture corresponding to a filler noun significantly increased at the relative verb affixed with a relativizer, and was largest at the filler where the fixation duration on the filler picture significantly increased. These results suggest that online resolution of the filler-gap dependency only starts at the relative verb marked with a relativiser and is finally completed at the filler position. Accordingly, they partly support the filler-driven parsing strategy for Korean, as for head-initial languages. In addition, the different patterns of eye movements between subject relatives and dative relatives indicate the role of case markers in parsing Korean sentences.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.163-172
• /
• 2005

When tracking a human face in the moving pictures with complex background under irregular lighting conditions, the detected face can be larger including background or smaller including only a part of the face. Even background can be detected as a face area. To solve these problems, this paper proposes a new face tracking method using a block difference image and a Kalman estimator. The block difference image allows us to detect even a small motion of a human and the face area is selected using the skin color inside the detected motion area. If the pixels with skin color inside the detected motion area, the boundary of the area is represented by a code sequence using the 8-neighbor window and the head area is detected analysing this code. The pixels in the head area is segmented by colors and the region most similar with the skin color is considered as a face area. The detected face area is represented by a rectangle including the area and its four vertices are used as the states of the Kalman estimator to trace the motion of the face area. It is proved by the experiments that the proposed method increases the accuracy of face detection and reduces the fare detection time significantly.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.5-16
• /
• 1999

본 연구의 목적은 Navajo 직물의 역사적 발달을 고전시대를 중심으로 살펴보고 특히 외부영향에 따른 직물의 변화를 고찰하는데 있다. 구체적으로 1) 고전시대의 전통적인 직물은 어떻게 발달하였는가\ulcorner 2) 고전시대 직물의 전통적 요소와 외부영향요인은 어떤 점이 다른가\ulcorner 예 초점을 맞추었다. 연구방법은 아메리카 인디언의 이동,문화 Navajo 직조 및 직물에 대한 문헌을 바탕을 조사하였고 아리조나 주립박물과 아리조나 역사 박물관을 방문하였으며 박물관 안에 있는 전문가들의 조언을 듣고 연구의 자료를 보완하였다. 또 비교 미학적 차원에서 고전시대 navajo 직물의 전통적 요소와 외부영향 요인을 분석하였고 외부영향을 받은 직물의 예를 시각적자료로 제시하였다. 이연구는 인디언직물에 대한 이해, 고전시대. Navajo 직물의 문헌고찰을 통한 민족의복의 문화적측면에 기여할수 이고 현대적 감각을 지닌 Navajo 직물을 한국직물에 접목 응용하는데 도움을 줄수 있다 본 연구의 결과는 다음과 같다. 1. Navajo 직물을 고전, 전환, 양탄자 시대로 구분되었고. 이중에서 고전시대가 navajo 직물의 특성을 가장 잘 나타내었으며 발달된 직조기술을 보였다. Navajo인들의 직조기술은 1863년경 최고조에 달했다. Navajo 직물의 디자인 주제로 주로 인간을 둘러싸고 있는 환경에서 얻어졌고 이것들은 직선의 기하학적 형태로 구체화되었다. 또한 직물에 표현된 색도 자연과 밀접한 관련성을 갖는 있었다. 2. Navajo 직물의 주용한 용도는 여성용 드레스, 남성용 셔츠는 어깨에 걸치는 두르개였다. 여성용 드레스는 동일한 크기의 직물의 두장을 직조한 후에 꿰매었고 남성용 셔츠는 머리가 들어갈수 있는 구멍이 있는 장방형 판쵸 스타일이었다. 어깨에 걸치는 두르개는 여성의 경우 가운데가 검은색이고 가장자리가 푸른색인형태오 흰색과 붉은 색이 교대로 나타나는 형태의 2가지가 있었고 남성용은 고전시대의 대표라고 일컬어지는 족장 두르개였다. 3. Navajo 직물은 외부의 영향을 받아 많은 변화를 가져왔다. 즉 스페인 사람들로 인하여 면 섬유대신 양모섬유를 사용하게 되었고 전통적 모양과 다른직물이 출현하게 되었다. 또한 인디고 염류, 색소니 실, 바에타 직물의 도입으로 다양한 색상의 표현이 가능해졌고 이와 관련하여 다이아몬드 십자형 톱니형 무늬드이 나타나게 되었다. 4, 고전시대를 대표하는 직물로 족장 두르개, 쇼올, 안장덮개를 들수 있으며 이 직물들에서 뚜렷하게 외부영향 요인을볼수 있다. 즉 족장 두르개의 가장 정교한 단계에서 다이아몬드 무늬가 가장가리 가운데 모서리에 위치하여 9지점 배치를 이룬 것 쇼올의 경우 폭보다 길이가 긴 형태의 비전통적 모습을 나타낸 것 안장덮개에서 보여지는 여덟포인트 별 무늬도 외부의 영향을 받은예이다. 뛰어난 직조기술로 유명한 navajo인들은 변화에 잘 적응하는 특성을 갖고 있었다. 외부의 영향을 그들은 긍정적으로 받아들였고 자기 자신들의 필요에 맞도록 수정하여 정체감을 잃지 않으면서도 문화를 발전시켰다. 따라서 고전시대의 Navajo 직물은 고유적 요인과 외래적 요인의 조화를잘 나타내고 있으며 디자인의 탁월함이 세련됨 천연염료와 인조염료의 배\ulcorner에 의한 색상의 우월성 등으로 오늘까지 높이 평가되고있다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.263-267
• /
• 2015

current mine detector can't division the section if it is conducted and it needs too much labor force and time. in addition to, if the user don't move the head of sensor in regular speed or move it too fast, it is hard to detect a mine exactly. according to this, to improve the problem using one direction ultrasonic wave sensing signal, that is made up of human body antenna part, main micro processor unit part, smart glasses part, body equipped LCD monitor part, wireless data transmit part, belt type power supply part, black box type camera, Security Communication headset. the user can equip this at head, body, arm, waist and leg in removable type. so it is able to detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal and it can express the 2D or 3D film about distance, form and material of the mine. so the battle combats can avoid the mine and move fast. also, through the portable battery and twin self power supply system of the power supply part, combat troops can fight without extra recharge and we can monitoring the battle situation of distant place at the command center server on real-time. and then, it makes able to sharing the information of battle among battle combats one on one. as a result, the purpose of this study is researching a smart wearable mine detector which can establish a smart battle system as if the commander is in the site of the battle.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.1 s.307
• /
• pp.17-26
• /
• 2006

This paper proposes a novel hidden Markov model (HMM)-based gesture recognition method and applies it to an HCI to control a computer game. The novelty of the proposed method is two-fold: 1) the proposed method uses a continuous streaming of human motion as the input to the HMM instead of isolated data sequences or pre-segmented sequences of data and 2) the gesture segmentation and recognition are performed simultaneously. The proposed method consists of a single HMM composed of thirteen gesture-specific HMMs that independently recognize certain gestures. It takes a continuous stream of pose symbols as an input, where a pose is composed of coordinates that indicate the face, left hand, and right hand. Whenever a new input Pose arrives, the HMM continuously updates its state probabilities, then recognizes a gesture if the probability of a distinctive state exceeds a predefined threshold. To assess the validity of the proposed method, it was applied to a real game, Quake II, and the results demonstrated that the proposed HMM could provide very useful information to enhance the discrimination between different classes and reduce the computational cost.

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.23-31
• /
• 2007

Apartments are built in small countries to accommodate densely populated cities and maximize urbanization. Many apartment complexes have been built in recent reconstruction or redevelopment projects. An increase in crime has resulted due to residents living in a narrow space. Larceny is the most commonly reported crime in apartment complexes. Apartments can be classified as stairway, hallway, or plane surface. This study compares and analyzes the frequency of theft by apartment type to assist in creating a safer residential space. In America and England, scholars studied to make a safer residential space, and have applied the theory of 'the Defensible Space' and 'Crime Prevention Through Environmental Design(CPTED)' since 1970s. Korean apartment design now reflects CPTED in new apartment construction. In this study, 12 apartment complexes were selected in Changwon city to conduct analysis of theft in selected complexes. The study will cover housing invasion theft, motorcycle and car theft and snatching. The most frequency larceny is motorcycle and car theft, the second is housing invasion theft, and the least frequent is snatching. More residents' motorcycles and cars are damaged in a hallway style apartment. More frequently inhabitants have their possessions snatched on a stairway form. 1) When we build new apartment complexes, we must plan to improve territoriality and enhance a natural surveillance by reinforcing dwellers' relationship. Through planning we can prevention the larceny in apartments.

• Journal of Radiation Protection and Research
• /
• v.24 no.4
• /
• pp.215-223
• /
• 1999

Characteristics of radiation field in the steam generator(S/G) water chamber of a PWR were investigated and the anticipated effective dose rates to the worker in the S/G chamber were evaluated by Monte Carlo simulation. The results of crud analysis in the S/G of the Kori nuclear power plant unit 1 were adopted for the source term. The MCNP4A code was used with the MIRD type anthropomorphic sex-specific mathematical phantoms for the calculation of effective doses. The radiation field intensity is dominated by downward rays, from the U-tube region, having approximate cosine distribution with respect to the polar angle. The effective dose rates to adults of nominal body size and of small body size(The phantom for a 15 year-old person was applied for this purpose) appeared to be 36.22 and 37.06 $mSvh^{-1}$) respectively, which implies that the body size effect is negligible. Meanwhile, the equivalent dose rates at three representative positions corresponding to head, chest and lower abdomen of the phantom, calculated using the estimated exposure rates, the energy spectrum and the conversion coefficients given in ICRU47, were 118, 71 and 57 $mSvh^{-1}$, respectively. This implies that the deep dose equivalent or the effective dose obtained from the personal dosimeter reading would be the over-estimate the effective dose by about two times. This justifies, with possible under- or over- response of the dosimeters to radiation of slant incidence, necessity of very careful planning and interpretation for the dosimetry of workers exposed to a non-regular radiation field of high intensity.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.537-544
• /
• 2020

This paper proposes the creation of an android robot head based on the facial action coding system(FACS), and the generation of emotional expressions by FACS. The term android robot refers to robots with human-like appearance. These robots have artificial skin and muscles. To make the expression of emotions, the location and number of artificial muscles had to be determined. Therefore, it was necessary to anatomically analyze the motions of the human face by FACS. In FACS, expressions are composed of action units(AUs), which work as the basis of determining the location and number of artificial muscles in the robots. The android head developed in this study had servo motors and wires, which corresponded to 30 artificial muscles. Moreover, the android head was equipped with artificial skin in order to make the facial expressions. Spherical joints and springs were used to develop micro-eyeball structures, and the arrangement of the 30 servo motors was based on the efficient design of wire routing. The developed android head had 30-DOFs and could express 13 basic emotions. The recognition rate of these basic emotional expressions was evaluated at an exhibition by spectators.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.731-734
• /
• 2001

우편물을 집배원이 배달하는 순서로 자동구분 처리하기 위한 요소기술 줌에서 4-state 바코드 시스템이 개발되고 있으며 우편번호, 배달순서코드, 고객정보 등이 적용될 예정이다. 기존의 고객 바코드 판독 시스템은 우편물상의 바코드 심볼로지가 존재하는 판독대상 영역의 기울기가 ${\pm}4.47^{\circ}$ 이하이고, 심볼의 훼손과 잡영이 없을 경우에 $79{\sim}100msec(35,000{\sim}45,000$통/시간)의 속도로 자동 구분 정보가 판독된다. 본 논문에서는 판독범위 및 판독성능을 개선을 위하여 CCD(Charge Coupled Device) 센서로부터 획득된 이미지상에서 존재하는 심볼로지 정보의 고속판독 방법을 제시한 것이다. 이 판독방법은 그레이(gray) 이미지 바탕면의 경계값(threshold) 기울기 분포를 기준으로 2개의 경계값을 설정하여 판독대상 정보를 획득하였다. 또한, 4-state 바코드 심볼로지의 존재 가능성 영역만을 탐색하고, 판독대상 영역에서 트래커(tracker)를 탐색하여 심볼로지의 기울기값, 심볼로지 경계값, 심볼위치 좌표값을 생성한 후 심볼값이 판독한 것이다. 판독시험 결과는 판독대상 영역의 심볼로지가 ${\pm}45^{\circ}$ 기울어지고, 잡영이 존재할 경우에도 $30{\sim}60msec(58,000{\sim}l16,000$통/시간) 이내에 판독되었다. 우편물 자동구분용 바코드 판독기로써 적용될 경우에 판독속도가 평균 57.25% 이상 개선되고, 판독범위의 확장으로 0.2%의 기계적인 오류(이송과정예서의 Jam 발생 비율)를 제외할 경우에 거의 99.8% 우편물을 판독하여 자동구분 처리할 수 있게 될 것으로 기대된다.onebook 엑세스 모들(Server Phonebook Access Module)로 구성되어 있다.외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만