• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.779-783
• /
• 2012

The gas compressor is one of the important machine in the petrochemical industry. It is likely to have high vibration problems due to having large reaction source and structural characteristic. In this paper we analyze the cause of high vibration in the reciprocating compressor and present a solution to this problems. By performing this case study, we confirm the effectiveness of vibration reduction through excitation source changes.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.480-486
• /
• 1993

We propose and demanstrate a fiber laser as a sensor, whose output is the frequency of beat signals between eigenpolarization modes of the fiber laser. For the measurement of lateral stress, proportional constant of 4.8 kHz/gram is obtained with a good linearity. For the measurements of temperature and longitudinal strain applied to the polarization maintaining fiber laser, proportional constants of 30 kHz/$^{\circ}C$ -cm, and 43 kHz/${\mu}m$, respectively, are obtained.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.7
• /
• pp.534-541
• /
• 2002

Vibration and sound characteristics of King Song-Dok Bell are ivesigated. Natural frequencies. vibration modes and beat period of the bell are precisely measured. The effect of striking position and the position of nodal lines on the beat characteristics is examined. It is first found that the beat characteristics are quote different according to the position on the bell surface and clear beat is periodically generated on the circumference. It turns out that in King Song-Dok Bell, Dangjwa(the present striking position) is located at the position which makes a beat in the first vibration mode, as welt as it produces very clear beat In the second vibration mode.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.48-49
• /
• 2003

원자가 전자기파와 상호작용할 때 원자 전이의 결맞음 여기 (coherent excitation of atomic transitions)는 일반적인 현상이다. 이 상호작용은 라비 진동 (Rabi oscillation), 자유 유도 감쇠 (free induction decay), 단열 밀도 이송 (adiabatic population transfer), 결맞음 과도 (coherent transients； CT) 등 다양한 결과를 가져온다. 특히, 전자기파의 주파수가 원자의 공진주파수를 중심으로 스윕될 때 결맞음 과도 현상 (coherent transient phenomenon)은 밀도 반전 (population reversal)을 유도하기도 한다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.275-282
• /
• 2009

Generally, the sinusoidal cavity dither is adopted to ring laser gyroscope for eliminating the lock-in which is non-linear effect at the small rotation input. Despite this method, there are some remained errors which are generated at the dither turnaround, and those errors produce random walk which is a general character of a ring laser gyroscope. As one of the numerous research results for compensating these errors, there is a special lock-in compensation method which is the method of error estimation and compensation by comparing the beat signal periods of before and after the dither turnarounds. In this paper, by ring laser gyroscope modeling and numerical analysis, we verified the theoretical validity and confirmed the effectiveness of this method in expectation of the possible beat signal measurement time resolution. As a result, we confirmed the random walk decreases from a-half to a-third by this lock-in compensation method. So, it is expected to be a remarkable method for reducing the INS alignment time.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.91-92
• /
• 2011

Beat is a phenomenon, where the magnitudes and frequencies of the voltage and the current fluctuate. This paper describes a quantitative analysis of the beat phenomenon of a wind farm using the envelope of a current during intertie/grid fault conditions. In this paper, the ratio of the crest to the trough of the envelope curve and the time interval between adjacent troughs are defined and used to evaluate the beat phenomenon quantitatively. Beat phenomena under various fault and wind conditions are analyzed. The proposed quantitative analysis seems simple but effective in the more understanding of beat phenomenon of a wind farm, and thus can be used as a basis for operation and/or protection of an intertie.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.181-188
• /
• 1996

Geodetic Satellite Positioning Techniques (NNSS, Transit, Doppler, VLBI, SLR etc.) still have much difficulty in surveying and necessity of point positions is being amplified in korea. Therefore some research institutes have being investigated point positioning using the GPS. In this study, 1 arranged the theory deal with point positioning using GPS carrier beat phase of dual frequency and estimated corrections of errors that be included in GPS observable. Also, 1 determined point position by the differencing scheme of GPS carrier phase, and analyzed the accuracy of point position. 1 suggested potentiality of geodetic point positioning using GPS carrier phase by comparing result of relative positioning with result of point positioning and analyzing result of network adjustment fixed any point position.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.195-201
• /
• 2002

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600~1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with ainus to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial made laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, which allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.5
• /
• pp.249-254
• /
• 2011

Inquiring activities on the acoustic phenomena have been carried out by using a sound card installed in a personal computer. A sound card is cheaper and more accessible to the students than the precision equipment such as a function generator or an oscilloscope. The students record the sounds from various acoustic phenomena to the sound card. Then they analyze the frequency spectrums of that sounds by using a program. Inquired phenomena include beat by two tuning forks, sound from Rijke tube, pouring sound, breaking of a wine glass and pop-up sound of a wine bottle. Through these activities students perform quantitative analysis of various phenomena due to superposition, resonance and standing wave.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.530-536
• /
• 2002

The accurate measurements of thermal expansion coefficients is one of the most important techniques required not only in material science but also in industries. A high precision interferometric dilatometer, using acoustic optical modulator, has been constructed and its performance has been tested. The system consists of a double-path optical heterodyne interferometer and a radiant heating furnace. This provides highly accurate length measurement, and allows rapid heating and cooling method for the specimen. A three longitudinal mode frequency stabilized He-Ne laser, using the secondary beat frequency, is constructed. Its stability is found to be $5{\times}10^{-9}$. The uncertainty in the length measurement is estimated to be of nanometer order in the range between room temperature to 1100 K.