• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.197-202
• /
• 2015

A triangular fuzzy number is one of the most popular fuzzy numbers. Many results for the extended algebraic operations between two triangular fuzzy numbers are well-known. We generalize the triangular fuzzy numbers on $\mathbb{R}$ to $\mathbb{R}^2$. By defining parametric operations between two regions valued ${\alpha}$-cuts, we get the parametric operations for two triangular fuzzy numbers defined on $\mathbb{R}^2$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.326-326
• /
• 2020

하천의 본류와 지류가 만나는 합류부 흐름특성은 단일 하천에 비하여 수위, 유속, 경사, 유량 등 복잡한 수리학적 특성이 나타나게 된다. 특히, 홍수기 큰 호우사상이 발생하는 경우 본류와 지류에서 유입되는 각 유량의 크기에 따라 수위에 영향을 미치고 지류와 본류에 배수(back water)가 발생한다. 이러한 배수영향은 합류부 유량 산정에 있어서 매우 복잡한 요소로 작용한다. 일반적인 단일 하천에서는 수위가 증가하면 유량이 증가하여 수위관측소 수위 자료를 기반한 수위-유량관계곡선식을 이용하여 유량을 산정한다. 그러나 합류부에서는 배수영향으로 인하여 수위가 증가하더라도 수면경사가 완만해져 수위-유량관계곡선식 변수인 수위를 이용한 방법으로는 유량산정에 어려움이 있다. 따라서 조석 및 배수 영향 등 고리형 수위-유량관계가 발생하는 하천에서는 ADCP를 이용한 자동유량계측 방법을 채택하고 있다. 그러나 자동유량계측 시설을 설치하기 위해서는 고가의 비용이 발생하기 때문에 경제적 측면만 본다면 주요 지점이 아닌 모든 합류부에 설치하는 것은 어려움이 많다. 금강에 위치한 영동군(양강교) 관측소의 경우 하류 약 400m 우안측에서 유입되는 영동천의 영향으로 호우사상이 발생 할 경우 배수영향으로 고수위에서 상류 금산군(제원대교) 관측소와 첨두유량의 도달시간 및 유량 크기에서 역전이 발생한다. 본 연구에서는 이러한 문제를 해결하기 위한 초기 단계로서 영동군(양강교) 관측소가 위치한 금강과 영동군(초강교) 관측소가 위치한 영동천이 만나는 합류부에 수위계를 설치하였다. 호우사상별 유출에 따른 본류와 지류의 수면경사를 분석하여 배수영향이 시작되는 수위와 수위 상승으로 배수영향이 미미해지는 수위를 분석하여 배수영향 특성을 검토하였다. 이러한 분석은 기존 배수조건에서 왜곡된 유량 자료를 생산하는 수위-유량관계곡선식의 문제점을 개선하여 앞으로 정확한 유량산정 방법을 제시할 것으로 판단된다. 이러한 분석을 통하여 추후 합류부에서 배수영향 조건의 고리형 수위-유량관계곡선식 매개변수로 수위 외에도 수면경사를 고려한 수위-유량관계곡선식을 개발하는데 목적이 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.345-349
• /
• 2016

보본체와 물받이공을 보호하는 바닥보호공(bed protection)은 굴요성 구조(flexible structure)인 돌망태, 블록공, 사석 등으로 설치되어야 하며, 일반적으로 경제성과 시공성이 우수한 사석(riprap)이 많이 이용된다. 이때 사석의 안정성 확보를 위한 설계기준으로 국내의 경우 포설길이에 대해서만 제시하고 있으나, 외국의 경우 수심, 유속 등의 값을 기초로 사석의 크기, 포설두께, 포설길이를 산정할 수 있도록 상세하게 제시하고 있다. 이와 같은 실정으로 국내 하천 실무자들이 바닥보호공을 설계 할 때 하천설계기준을 바탕으로 블라이 공식 또는 국립건설시험소 공식을 적용하여 사석의 포설길이는 산정하지만 사석의 크기, 중량 등의 제원들은 외국 설계기준을 차용하여 산정하거나 생략하는 경우도 있다. 따라서 하천설계기준의 보완 및 최근 국내 주요하천에서 발생하는 바닥보호공 유실, 침하 등의 문제를 해결하기 위한 연구가 필요하다. 본 연구는 전산유체동역학(Computational Fluid Dynamics, CFD) 모형인 FLOW-3D 모형을 이용하여, 바닥보호공 주변 흐름에 대한 수치모의를 수행하였다. 이때 난류 모형은 LES (Large Eddy Simulation) 모형을 적용하였으며, 바닥보호공에 작용하는 비교적 작은 척도의 와(vortex)를 해상할 수 있도록 조밀한 격자를 부여하였다. 초기 수치모형 결과의 적정성은 수리실험 결과와 비교하여 판단하였으며, 수리실험을 잘 재현해내는 격자, 매개변수 등을 적용하여 보의 하류 수위 변화에 따른 유속, 난류강도 등에 대한 분석을 수행하였다. 본 연구 결과는 바닥보호공 설계를 위한 기초자료로 활용될 수 있으며, 향후 수리실험과 병행하여 국내 실정에 맞는 설계식 개발에 대한 연구가 필요한 것으로 보인다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.187-197
• /
• 2010

Carbon dioxide Capture and Storage(CCS) is regarded as one of the most promising options to response climate change. CCS is a three-stage process consisting of the capture of carbon dioxide($CO_2$), the transport of $CO_2$ to a storage location, and the long term isolation of $CO_2$ from the atmosphere for the purpose of carbon emission mitigation. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the $CO_2$ mixture captured from the power plants and steel making plants contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_2$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification, transport and injection processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to analyze the impact of these impurities on the whole CCS process at initial design stage. The purpose of the present paper is to compare and analyse the relevant physical property models including BWRS, PR, PRBM, RKS and SRK equations of state, and NRTL-RK model which are crucial numerical process simulation tools. To evaluate the predictive accuracy of the equation of the state for $CO_2-SO_2$ mixture, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $SO_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable physical property model with optimized binary parameter in designing the $CO_2-SO_2$ mixture marine geological storage process.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.217-226
• /
• 2009

Marine geological storage of $CO_2$ is regarded as one of the most promising options to response climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the marine geological structure such as deep sea saline aquifer. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_x$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to perform numerical process simulation using thermodynamic equation of state. The purpose of the present paper is to compare and analyse the relevant equations of state including PR, PRBM, RKS and SRK equation of state for $CO_2-N_2$ mixture. To evaluate the predictive accuracy of the equation of the state, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $N_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable equation of state and relevant binary parameter in designing the $CO_2-N_2$ mixture marine geological storage process.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.861-874
• /
• 2019

A great interest in the seismic performance evaluation of small size tunnel structures such as utility tunnel has been taken since recent earthquakes at Pohang and Gyeongju in Korea. In this study, the three-dimensional dynamic analyses of vertical shaft and horizontal tunnel under seismic load were carried out using FLAC3D. Especially, parametric analyses was performed to investigate the effects of interfacial stiffness on interfacial behavior between soil and structure. The parametric analysis showed that the interfacial stiffness scarcely gave an effect on the global dynamic behavior of the structure, while had a significant effect on the local displacement behavior of the connections. The magnitude of the interfacial stiffness was inversely proportional to the displacement, while the magnitude of interface stiffness was proportional to the normal and shear stresses. The results of this study suggest the limitations of the existing empirical equations for interfacial stiffness and emphasize the need to develop new interfacial stiffness models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.417-426
• /
• 2023

Rapid climate change has resulted in glacial retreat and increased meltwater inputs in the Antarctic Peninsula, including King George Island where Marian Cove is located. Consequently, these phenomena are expected to induce changes in the water column light properties, which in turn will affect phytoplankton communities. To comprehend the effects of glacial retreat on the marine ecosystem in Marian Cove, we investigated on phytoplankton biomass (chlorophyll-a, chl-a) and various environment parameters in this area in December 2021 and January 2022. The average temperature at the euphotic depth in January 2022 (1.41 ± 0.13 ℃) was higher than that in December 2021 (0.87 ± 0.17 ℃). Contrastingly, the average salinity was lower in January 2022 (33.9 ± 0.10 psu) than in December 2021 (34.1 ± 0.12 psu). Major nutrients, including dissolved inorganic nitrogen, phosphate, and silicate, were sufficiently high, and thus, did not act as limiting factors for phytoplankton biomass. In December 2021 and January 2022, the mean chl-a concentrations were 1.03 ± 0.64 and 0.66 ± 0.15㎍ L^-1, respectively. The mean concentration of suspended particulate matter (SPM) was 24.9 ± 3.54 mgL^-1 during the study period, with elevated values observed in the vicinity of the inner glacier. However, relative lower chl-a concentrations were observed near the inner glacier, possibly due to high SPM load from the glacier, resulting in reduced light attenuation by SPM shading. Furthermore, the proportion of nanophytoplankton exceeded 70% in the inner cove, contributing to elevated mean fractions of nanophytoplankton in the glacier retreat marine ecosystem. Overall, our study indicated that freshwater and SPM inputs from glacial meltwater may possibly act as main factors controlling the dynamics of phytoplankton communities in glacier retreat areas. The findings may also serve as fundamental data for better understanding the carbon cycle in Marian Cove.