• Title/Summary/Keyword: 망대특성

Search Result 12, Processing Time 0.02 seconds

Performance Analysis of Auto Body Manufacturing System using ARENA Simulation (ARENA 시뮬레이션을 이용한 차제공장 수행도 분석)

  • Jung, Jae-Ho;Kim, Hyun-Gun;Kim, Hyang-He;Jeon, Tae-Bo
    • Journal of Industrial Technology
    • /
    • v.20 no.A
    • /
    • pp.229-238
    • /
    • 2000
  • Simulation analysis for an auto body manufacturing system has been performed in this study. The major goal is to figure out the condition yielding the production rate, 70 per hour. It is, however, very difficult to maintain this rate due to inherent system factors such as machine failure rates, machine repair rates, number of carriers between manufacturing lines(shops), carrier speed etc. We first carefully examined the system and developed a simulation model using ARENA. We then applied statistical experimental design concepts for performance analysis. Our results indicate that the buffer size of 30 and quick repair of failed robots are required for the desired production rate. Other factors, on the other hand, are seen to have minor effects on the throughput. The approach taken in this study and the results obtained may provide a practical guideline for performance analysis and thus be applied without trepidation for similar cases.

  • PDF

Selecting on the Preferred Alternatives of MADM with the­smaller­the­better or the­larger­the­better Characteristics using SN Ratios (SN비를 이용한 다수의 망소/망대특성을 가지는 MADM 문제의 선호대안 선정)

  • 이강인
    • Journal of Korean Society for Quality Management
    • /
    • v.31 no.4
    • /
    • pp.150-163
    • /
    • 2003
  • The purpose of this paper is to propose an interactive method using the concept of Signal­to­Noise (SN) ratios and cutting ranges for selecting the most preferred alternatives of Multiple­attribute Decision­Making(MADM) with the­smaller­the­better or the­larger­the­better characteristics. In this method the decision makers could make a grouping of attributes by their priorities. This research is based on the assumption of an equality between the attributes of MADM with the characteristics of Taguchi method. As a result, this interactive method could transform the characteristic value of Taguchi method into the size of SN ratios which are relatively easy to understand by decision makers.

Development of Low Noise Intake System using Taguchi Method (다구찌법을 이용한 자동차 흡기계의 저소음화에 대한 연구)

  • 오재응;조용구;이규태
    • Journal of KSNVE
    • /
    • v.11 no.2
    • /
    • pp.234-240
    • /
    • 2001
  • Recently, the regulations from the government and the concerns of people be raised to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software was developed in this paper. In this study, Robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radius of each component that was thought to be effective to the performance of intake system was selected. At first, factors are arranged by using Ll8 table of orthogonal array and then optimum value can be obtained by modified Ll6 table of orthogonal array.

  • PDF

Design of Muffler using Taguchi Method and Experimental Design (다구찌 방법과 실험계획법을 이용한 소음기의 설계 방법)

  • 오재응;차경준;이규태;진정언
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.7 no.5
    • /
    • pp.121-129
    • /
    • 1999
  • Recently, the regulations from the govemment and the concems of the people give rise to the interest in exhaust noise of passenger car as much as other vehicles. The exact analysis of various mufflers is needed to reduce the level of exhaust noise. In this paper, we propose a design to improve the mufflers capacity by reducing noise of exhaust system combining Taguchi method and fractional factorial design. In order to measure the performance of a muffler, the performance prediction software which is developed by the Dept. of Automotive Engineering at Hanyang University is used. From the current muffler system we select control factors such as lenght and radius of each component that are thought to be effective on capacity of muffler. Factors are arranged using L18, L27 table of orthogonal array and the fractional factorial design for analysis. We find some significant interaction effects using 1/3 fractional factorial design and accomplish the reduction of noise from the muffler.

  • PDF

Analysis of electric property in silicon thin film by using Design of Experiment(DOE) (실험계획법(DOE)을 이용한 실리콘 박막의 전기적 특성 분석)

  • Kim, SunKue;Kim, SunYoung;Lee, KiSe;Kim, BeomJoon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.66.2-66.2
    • /
    • 2010
  • 미니탭(Minitab) 프로그램에 있는 실험계획법(Design of experiment)를 이용하여 박막실리콘 I-layer의 주효과 및 교호작용에 대한 연구를 실시하였다. I-layer의 주요 특성은 증착속도 및 전도도에 대하여 분석을 하였으며, 최종적으로 선택된 증착조건을 사용하여 비정질 실리콘 태양전지를 제조하여 확인 하였다. 실험설계는 2수준 5인자 완전설계요인법을 사용하였다. 분석결과 단막의 증착속도에 영향을 주는 주효과로는 Power와 E/S거리고 나타났으며, Power와 E/S거리, Power와 Pressure에서 큰 교호작용이 일어남을 확인 할 수 있었다. 암전도의 영향을 주는 주효과는 Sub. Temp.를 제외하고는 모두 영향을 주고 있었으며, 상당히 복잡한 교호작용을 이루고 있어 정확한 분석을 할 수는 없었다. 광전도도의 경우도 주효과에서 SiH4 flow rate를 제외하고는 모두 영향을 주고 있었으며, 복잡한 교호작용으로 정확한 분석이 어려웠다. 따라서 P-value를 분석하여 최종 R-제곱값이 증착속도는 97%이상의 높은 값을 얻었으나 전도도의 경우 최대차수 3차항으로 70~80%정도의 낮은 값을 얻었을 수 있었다. 낮은 값을 얻은 이유로는 실험설계시 몇몇 조건이 불안정한 plasma 상태로 인하여 전도도의 측정 편차가 커 분석오차가 높았을 것으로 추정된다. 암전도를 망소특성, 광전도도를 망대특성으로 광민감도 $10^5$으로 최적화 하여 비정질 태양전지를 만들어 평가한 결과 약 9%대의 광변환 효율을 얻을 수 있었으나 만족도 40%대의 낮은 값으로 향후 이와 관련한 더 정밀한 측정 및 분석이 요구된다.

  • PDF

Bond Strength of SrZrO3 Coatings on Ag Sheathed Bi(2223) Mono-core Tape (은이 피복된 단심 Bi(2223) 초전도 선재에 대한 SrZrO3 코팅층의 접착강도 특성)

  • Lee, Se-Jong;Ye, Kyung-Hwan;Lee, Deuk-Yong;Song, Yo-Seung
    • Journal of the Korean Ceramic Society
    • /
    • v.39 no.10
    • /
    • pp.1001-1006
    • /
    • 2002
  • Bond strength of $SrZrO_3$ resistive oxide barrier on Ag sheathed Bi(2223) tapes prepared by the sol-gel and dip-coating method was evaluated with an aid of Taguchi method and $L_18(2^1{\times}3^7)$ orthogonal arrays to determine the optimal process combination of levels of factors that best satisfy the bigger is better quality characteristic. The observed optimal condition is as follows: Sr/Zr mol ratio(0.3/0.7), amount of organic vehicle(5 wt%), drying temperature and time(160${\circ}C$, 10 min), heat treatment temperature and time(500${\circ}C$, 20 min), respectively. ANOVA analysis suggested that the influence of the factors within ${\alpha}$=0.1 was significant with a 90% confidence level.

Study on Enhancement for Interfacial Energy Release Rate of Adhesive Layer in Fiber Metal Laminates using Taguchi Method (다구찌 기법을 적용한 섬유금속적층판 접착층의 에너지 해방률 강화에 대한 연구)

  • Kil, Min-Gyu;Park, Eu-Tteum;Song, Woo-Jin;Kang, Beom-Soo
    • Composites Research
    • /
    • v.29 no.5
    • /
    • pp.249-255
    • /
    • 2016
  • The fiber metal laminates have been widely used at aerospace industry due to outstanding fatigue characteristic, corrosion resistance and impact resistance and so forth. The objective of this research is to establish the proper manufacturing variables for enhancing the interfacial energy release rate of fiber metal laminates using Taguchi method. The major variables of the manufacturing process are surface treatment, pre-specified temperature holding time and additional pressure. In order to determine the interfacial adhesive strength, the double cantilever beam and end-notched flexure tests were conducted. Afterward, Mode I and II energy release rates at various conditions were introduced signal-to-noise ratio with respect to each condition. Finally, the most efficient manufacturing variables are recognized using larger-the-better characteristic.

Optimum Design of Linear Motor by Using Taguchi Method (다구찌 기법을 이용한 선형 모터의 최적 설계)

  • Seol, Jin-Soo;Lee, Woo-Young;Rim, Kyung-Hwa
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2005.11a
    • /
    • pp.192-195
    • /
    • 2005
  • Nanometer operating linear motor is difficult to control the nano-positioning because of the vibration between structures changing of mechanical friction force happened by properties of the vibration and heat caused by operating of a mover. Therefore, it is required to analysis the vibration and heat about a mover. In this paper, we will analyze the property of vibration through analyzing by using FEM a mover of linear motor developed in the non-load situation and suggest the direction of optimal design about a mover by using method of DOE, also try to find the solution to operate the linear motor stabilized through the reducing weight of mover considering the vibration.

  • PDF

Optimization of Corrosion Properties of Ti/TiO2/IrO2-RuO2 Electrodes via Taguchi Method (Taguchi법을 이용한 Ti/TiO2/IrO2-RuO2전극의 부식특성 최적화)

  • 이득용;채경선;최형기;예경환;안중홍;송요승
    • Journal of the Korean Ceramic Society
    • /
    • v.39 no.6
    • /
    • pp.582-588
    • /
    • 2002
  • IrO$_2$-RuO$_2$ films were deposited on plasma sprayed TiO$_2$ buffer layer above Ti metal by sol-gel and dip-coating method. Organic vehicle (ethyl cellulose and $\alpha$-terpineol) and glass frit were added to improve adherence of the coatings. Taguchi method and L$_{18}$ (2$^1$$\times$3$^{7}$ ) orthogonal arrays were evalvated in terms of current density to determine the optimal combination of levels of factors that best satisfy the bigger is better quality characteristic. The observed conditions were as fellows: ethyl cellulose (100 cp), drying temperature and time (17$0^{\circ}C$,20 min), heat treatment temperature and time (75$0^{\circ}C$,10 min), the weight ratio of IrO$_2$-RuO/powders to glass frit (99:5), final heat treatment time (120 min) and flow rate of air (5 sccm), respectively. ANOVA analysis suggested that the influence of the factors within $\alpha$= 0.1 was significant with a 90% confidence level.

Process Optimization for Reduction of Waste Acids of Electropolishing Solution using Round Bus Bar (구형 부스바를 이용한 전해연마액의 폐산 폐기물 감소를 위한 공정 최적화)

  • Kim, Soo Han;Cho, Jaehoon;Park, Chulhwan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.8
    • /
    • pp.722-727
    • /
    • 2016
  • In this study, we attempted to reduce the generation of waste acids in the electropolishing process by improving the current efficiency. The optimum conditions of the electropolishing process when using the round bus bar were determined by the Taguchi method. The current density, polishing time, electrolyte temperature and flow rate were selected as the control factors for the current efficiency in the electropolishing process. An orthogonal array was created by considering three levels for each factor and experiments were carried out. The larger-the-better SN ratios were calculated by the Taguchi method. The current density was the most important factor affecting the current efficiency and the polishing time was the least important one. The optimum conditions to minimize the generation of waste acids were a current density of $45A/dm^2$, polishing time of 4 min, electrolyte temperature of $65^{\circ}C$ and flow rate of 7 L/min. The results of the ANOVA confirmed that the effects of the current density, electrolyte temperature and flow rate are significant at the 95% confidence level. The increase in the contact area and contact force afforded by using the round bus bar improved the current efficiency which, in turn, reduced the amount of waste acids generated. Further research is planned to investigate the effect of the type of bus bar on the current efficiency.