• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.170-174
• /
• 2011

홍수시 저수지 상류로부터 유입되는 다량의 오염물, 협잡물은 저수지의 경관 및 수질에 악영향을 미친다. 이러한 오염물질은 홍수시 일시에 유입되어 표층에 부유하므로 수거를 위한 시간 및 비용이 비교적 크게 발생된다. 따라서 이러한 부유쓰레기를 효과적으로 차단할 수 있는 시설물 설치는 필연적이다. 이렇게 부유쓰레기 수거를 위한 방법 중, 저수지 내부에 선 차단 시설을 설치하여 부유쓰레기를 홍수터로 유도하여 수거하는 방법은 일시에 많은 양의 부유쓰레기를 차단하게 되는데 유지관리, 경제적 측면에서 유리하다. 본 연구에서는 부유쓰레기 수거를 위한 선 차단시설 운영 방안을 검토하기 위하여 홍수시 저수지 내로 유입되는 유속흐름을 2차원 수치해석 모형인 RMA-2 모형으로 해석하고, 저수지의 내 외부 지형분석을 통하여 시범 지구의 선 차단시설 설치 위치를 선정하였고, 3차원 수치해석 모형인 FLOW-3D 모형으로 검증하였다. 선 차단시설 설치 시범지역 위치 선정을 위하여 저수지의 규모, 접근성, 시공 장비의 대여 편이성 등을 종합적으로 고려하여 기흥저수지를 시범예정 구역으로 선정하였다. 저수지 내로 유입되는 유속특성을 2차원 수치해석 모형인 RMA-2 모형으로 해석하여 시범 지구의 선 차단시설 설치 위치를 제안하고 홍수터 부지를 결정하였다. 부유쓰레기 유도를 위한 선차단시설은 저수지 급확대로 인한 유속 감소구간과 와류발생 구간이 적절한 것으로 분석되었으며 시범설치 지역인 기흥저수지 상류 급확대부에 선 차단시설을 제안하였다. 홍수터의 규모는 Armitage와 Rooseboom(2000)이 제안한 경험식을 바탕으로 $5,300m^2$을 제안하였으며, 기흥저수지 상류부 우안에 항아리 모양으로 설치하도록 계획하였다. 또한, 3차원 수치모형실험을 통하여 검토한 결과, 차단막 설치로 부유 쓰레기의 하류 이송은 차단되고, 원활하게 홍수터로 유도됨을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.43-50
• /
• 1986

A research was performed to examine the applicability of aerobic fixed-biofilm reactors for removal of biodegradable organics in raw waters. Crushed briquette ashes or granite were utilized as media. Experiments were carried out by feeding packed bed reactors with a synthetic raw water prepared by dissolving phenol in tap water with other inorganic nutrients. Results of the research showed that the effluent TBOD concentrations were lower than 6 mg/l when the influent BOD concentrations were kept below 50 mg/l and a detention time of about 2.7 hours was provided. The SBOD concentrations of the treated waters should be less than 5 mg/l since the effluent SS could be removed by conventional water treatment methods such as coagulation and filtration. It was also found that most of the SS in the effluents were humic materials since the effluent SS caused little BOD. This means the biofilm in the reactor was in endogenous respiration phase due to low F/M ratio. According to the results of this study, it is recommended to pretreat any raw water contaminated with biodegradable organics in an aerobic fixed biofilm reactor with a detention time of 2 to 3 hours.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.159-169
• /
• 2013

The effect of humic acid (HA), and the roles of microfiltration (MF), PES (polyethersulfone) beads adsorption, and photo-oxidation were investigated in hybrid process of ceramic MF and PES beads loaded with titanium dioxide ($TiO_2$) photocatalyst for advanced drinking water treatment. The results of water and nitrogen back-flushing were compared in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). Because membrane fouling increased dramatically as increasing HA, Rf increased and J decreased, and finally $V_T$ was the highest at 2 mg/L HA. Average turbidity treatment efficiencies were almost same independent of HA concentration. Average organic matter treatment efficiency was the minimum 71.4% at 10 mg/L HA in water back-flushing, but those were almost constant in nitrogen back-flushing. The hybrid process of MF, PES beads, and UV (MF + $TiO_2$ + UV) have the lowest $R_f$, and the highest J and $V_T$ in both water and nitrogen back-flushing. The turbidity and organic matter treatment efficiencies were the maximum at MF + $TiO_2$ + UV independent of water and nitrogen back-flushing, and decreased sequently as simplifying the process to MF. However, adsorption performed the more important role than photo-oxidation in water back-flushing, and photo- oxidation was the more than adsorption in nitrogen back-flushing.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.521-526
• /
• 2006

A membrane bioreactor (MBR) is an effective tool for wastewater treatment with recycling. MBR process has several advantages over conventional activated sludge process (ASP); reliability, compactness, and quality of treated water. The resulting high-quality and disinfected effluents suggest that MBR process can be suitable for the reused and recycling of wastewater. An anoxic/oxic (A/O) type MBR was applied to simultaneous removal of organics and nutrients in sewage. At first, the efficiency of submerged MBR process was investigated using a hollow fiber microfiltration membrane with a constant flux of $10.2L/m^2{\cdot}h$ at each solids retention time (SRT). Results showed that protein/carbohydrate (P/C) ratio increased and total extracellular polymeric substances (EPS) remained constant with SRT increased. Secondly, A/O type MBR with a reverse osmosis (RO) membrane was employed to treat the municipal wastewater. The performance of A/O type MBR-RO process is better for the treatment of organics and nutrients than ASP-MF-RO process in terms of consistent effluents quality.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.406-413
• /
• 2012

Effect of three additives, chitosan, ferric chloride, and MPE50 on membrane fouling reduction was studied. They were introduced with various dosing rate into activated sludge, and changes in filtration resistance measured by the batch cell filtration test were evaluated. Both the filtration resistance and the specific cake resistance were minimized at 20 mg/g-MLSS with chitosan, 70 mg/g-MLSS with ferric chloride, and 20 mg/g-MLSS with MPE50 addition, respectively. Introduction of the additives into the activated sludge resulted in reduction of not only cake resistance, but also fouling resistance. However, the chitosan addition to three different activated sludge resulted in three different optimal dose of 10, 20, 30 mg/g-MLSS, respectively. This implies that the optimal dose is dependent on sludge characteristics rather than a constant value. Overdose above the optimal dosage always aggravated filterability in all cases. Zeta potential of sludge flocs, relative hydrophobicity, floc size distribution, soluble EPS concentration and supernatant turbidity were measured in order to analyze fouling reduction mechanism. Nearly neutral surface charge along with the largest particle size was observed at the optimal dose. This could be explained by particle destabilization and restabilization mechanism as positively charged additives were injected into sludge flocs of negative surface charge. Both soluble EPS concentration and supernatant turbidity also showed the lowest value at the optimal dose. These foulants are believed to be coagulated and entrapped in sludge flocs during flocculation. Chitosan and MPE50 which are cationic polymeric substances showed higher reduction in both soluble EPS and fine particles comparing with ferric chloride.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.3
• /
• pp.230-236
• /
• 2016

Economic growth has increased the living standards around the world. Water pollution, in particular, is a public relations issue because it poses a direct threat to everyone's lives. As of recently, the production of taste and odor (T&O) compounds has been a common problem in the water industry. The adsorption process using granular activated carbon (GAC) has been the most widely used process. The objectives of this study were to evaluate the microorganisms before and after the backwashing of GAC and to identify the species of the microorganisms found. Five dominants microorganisms were confirmed after the microfiltration process from backwashing of GAC, and the dominant bacterial species were found to be ${\beta}$-proteobacterium species, Porphyrobacter donghaensis, Polaromonas rhizophaerae, Hydrogenophaga species, and Pseudonocardia species. However, when UV treatment after microfiltration was performed, Hydrogenophaga species and Psedonocardia species were eliminated. Herein, I conclude that the UV treatment post microfiltration process is more efficient than microfiltration process alone. The findings of this study may provide useful information regarding the management of microfiltration process.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.39-49
• /
• 2014

The effects of pH and oxygen back-flushing were investigated in hybrid process of ceramic microfiltration and PES (polyethersulfone) beads loaded with titanium dioxide ($TiO_2$) photocatalyst for advanced drinking water treatment in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). As increasing pH, $R_f$ decreased and J increased. Finally the maximum $V_T$ could be acquired at pH 9. Treatment efficiencies of turbidity was almost same independent of pH. Treatment efficiency of dissolved organic matters (DOM) decreased as increasing pH. As results of comparing the oxygen and nitrogen back-flushing, $R_{f,180}$ at oxygen back-flushing was the lower than that at nitrogen back-flushing, and the dimensionless final permeate flux ($J_{180}/J_0$) by initial permeate flux ($J_0$) at oxygen back-flushing was maintained the higher than that at nitrogen back-flushing except 10 and 12 min of back-flushing period (FT). Treatment efficiency of turbidity at oxygen back-flushing was a little higher than that at nitrogen back-flushing. Treatment efficiency of the DOM at nitrogen back-flushing was the higher than that at oxygen back-flushing. Also, treatment efficiency of turbidity at saturated oxygen was similar with those of oxygen and nitrogen back-flushing, but the treatment efficiency of DOM was increased significantly because OH radical could be generated by reaction between saturated oxygen and photocatalyst.

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2004

The mixture of botanical antimicrobial agent-citurs product and ginseng extract mixture(BAACG) was applied to garlic stalk or pork cooked in soysauce to extend their selflife. BAACG showed a remarkable antimicrobial activity against a wide spectrum of food-borne infection microorganisms and thermal and pH stability. In comparison with scanning electron microscopic photos of microbial cells not-treated and treated with BAACG the physiological cytomembrane function of BAACG-treated microorganisms was destroyed and the dead cell numbers was increased. The quality of garlic stalk or pork cooked in soysauce was controlled by the addition of BAACG in their raw materials. BAACG-treated garlic stalk or pork cookeries showed considerably to decrease the numbers of total cell count and expressed no odor and no sticky state appeared in the control. BAACG was expected to be a preservative agent which could be applied to raw or processed food stuffs in the view of food safety.

• Clean Technology
• /
• v.10 no.1
• /
• pp.37-45
• /
• 2004

This study examined the separation characteristics of some of the most commonly used disperse, reactive and acid dyes by nanofiltration membrane. The chemical characteristics of three major dye solutions such as chemical oxygen demand, total nitrogen, total organic carbon, color, suspended solids, total dissolved solids, conductivity were investigated in this work. Experiments showed that the types of dye had a significant effect on both permeate flux and rejection efficiencies mainly due to the differences among their chemical structures and natures. Especially, the nanofiltration of reactive dye solutions showed higher permeate flux, lower total dissolved solid rejection efficiency and higher organics rejection efficiency than those of disperse dye solutions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.97-102
• /
• 2012

Recently, a wireless sensor network system has been receiving great attention for management of underground facilities. However, traditional wireless communication systems using microwaves in several hundred MHz ~ several GHz experience significant performance degradation in the non-uniform underground environment. In this research, in order to make a robust communication for the underground facilities, we propose a wireless underground sensor system based on magnetic field communication. In 3 meters underground environment including rocks, soils, water, etc.,, our proposed sensor network system has proved fully functional and met its performance specification.