• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.133-134
• /
• 1997

1. 서론 : 제지산업은 용수 다소비용 산업으로, 생산하는 제품 톤당 약 40톤으로 폐수가 배출되고 있으며 공정내로 재활용하는 폐수량을 고려한다면 그 사용량은 더욱 클 것이다. 이와 같은 다량의 용수 사용으로 인하여 제지 공장의 폐수를 제조공정에서 재활용하는 방법이나 배출량을 감소시키는 방안들이 법률적이나 경제적인 측면에서 연구되고 있는 실정이다. 본 연구에서는 기존의 응집, 침전공정을 대신하고 여재를 이용힌 물리적 여과와 활성높은 미생물이 여재 표면에 부착되어 수중 유기물질을 생물학적으로 분해 제거하는 이중의 효과를 거둘 수 있는 호기성 생물막 공정을 도입하고 그 처리수의 유기물 및 용존 무기물을 Membrane 공정으로 제거함으로써 제지공업폐수를 재활용하여 용수기준까지 처리하 System의 개발을 그 목적으로 하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.114-115
• /
• 1997

1.서론 : 중금속 및 유독한 금속물질을 함유한 기존의 폐수처리법으로는 다양한 방법이 있으나, 계면활성제를 첨가한 분리기술은 환경적인 측면과 경제적인 측면에서 타 공정에 비해 우수함이 입증된바 계속적인 연구개발이 진행되어 왔다. (생략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.58-58
• /
• 1994

슬립캐스팅법으로 제조한 튜브형 $\alpha$-알루미나 담체 (평균기공크기 = $0.1 \mum$)에 졸-겔 침지코팅(dipcoating) 또는 가압코팅 (pressurized coating) 법에 의하여 극미세입자 $\gamma$-AlOOH, $TiO_2, SiO_2$, 및 aluminosilicate diphasic 졸을 코팅한 후 300 ~ 500$\circ$C 에서 열처리하여 세라믹 복합막을 제조하였다. 복합막 전체에 대한 균열유무는 $N_2$ 기체투과율의 평균압력에 대한 의존성으로부터 평가하였으며, 한외여과 (ultrafiltration)에의 응용성을 규명하기 위하여 막의 재질 및 제조조건에 따른 polyethylene glycol (PEG) 수용액의 분획분자량 변화를 측정하였다. 합성 세라믹 복합막의 분획분자량 측정 결과 $SiO_2$의 경우 2,000 정도로 매우 우수하였으며 $\gamma-Al_2O_3, TiO_2$, 그리고 aluminosilcate 막들은 6,000 ~ 10,000 범위 값을 갖고 있었다. 또한 막의 기공크기 및 분획분자량을 제어하기 위한 방법으로서 $TiO_2$ 복합막을 300 ~ 700$\circ$C 에서 열처리하였으며 이들에 대한 분획분자량 변화를 비교 분석하였다.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2016

The reuse of wastewater is being diffused to manage and develop the water resources. Generally, the treated wastewater is discharged to the river after being treated to meet the effluent quality standard or reused for diverse uses through the reprocessing. And recently, as the reuse of the treated wastewater is activated, the technologies to utilize for the high quality water resources such as industrial water by reusing the wastewater with Membrane Distillation (MD) are under development. In this study, the direct contact membrane distillation (DCMD) process has been applied to treat sewage discharge water for water reuse. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$. The influence of operating parameters, such as feed temperature, feed flow rate, feed concentration, on the permeate flux and rejection has been investigated. All filtration tests were conducted till the feed volume reached a concentration factor of 3.0. Thus, the operating period ranged between 19 hr and 49 hr depending on filtration performance. The results showed that above 92% of TN, TP, COD and TOC in the feed could be rejected regardless of an operating condition. The water flux was ranged from 13.8 to 20.3 LMH. The lowest flux was obtained at the operating condition with the feed temperature of $50^{\circ}C$ and feed flow velocity of 500 mL/min while the highest one was measured with $60^{\circ}C$ and 900 mL/min. When the concentration factor reached 3.0, water flux declined by approximately ranged from 14.5% to 33.3%. But the fouling in MD is almost fully reversible, with more than 90% recovery of permeate water flux following a DI water rinse without the addition of chemical cleaning reagents.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.291-312
• /
• 2017

Seawater desalination is currently considered to be one of the primary technologies to resolve the global water scarcity problem. A basic understanding of membrane filtration phenomena is significant not only for further technological development but also for integrated design, optimal control, and long-term maintenance. In this vein, the present work reviews the major transport and filtration models, specifically related to reverse osmosis phenomena, provides theoretical insights based on statistical mechanics, and discusses model-based physical meanings as related to their practical implications.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.102-108
• /
• 1998

Permeation behavior of the semiconductor rinsing wastewater containing Si particles was examined by ultrafiltration using the polysulfone plate membrane. The permeation flux was gradually decreased with time. It was due to the growth of cake deposited on the membrane surface and the pore plugging by Si particles. Permeation flux of cross flow type was 1.4 times higher than that of the dead end flow type. Nitrogen back flushing which is the removing method of membrane fouling was superior to the water sweeping. With nitrogen back flushing, the decrease of permeation flux due to the fouling was recovered about 85 % to the initial flux in the flat plate membrane system. The rejection rate of Si particles was about 90 % and the size of Si particle in the permeate was about 70 nm.

• Membrane Journal
• /
• v.32 no.3
• /
• pp.198-208
• /
• 2022

Membrane can selectively separate various substances such as organic substances, liquids, solutes, vapors, gases, ions or electrons according to the separation technology and various uses. Membranes are largely divided into symmetric membranes and asymmetric membranes, and classified into porous and nonporous structure depending on the presence or absence of pores. Also, the interface of the membrane may be molecularly uniform, or chemically or physically non-uniform. Preparation techniques include melt extrusion, stretching, template leaching, track-etching, solution casting, phase inversion, and solution coating method. The prepared membrane can be applied to various applications such as microfiltration, ultrafiltration, nanofiltration, reverse osmosis, gas separation and energy fields. This review provides a tutorial on how to prepare membranes according to the classification and types.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.10a
• /
• pp.41-42
• /
• 1991

본 연구는 활성슬러지공법의 침전조를 막으로 대체하여 고액분리를 효과적으로 수행하도록 하는 막분리 활성슬러지 공법에 관한 것이다. 이와같은 방법은 공정자체가 간략화되는 동시에 종래법에서 슬러지 팽화(bulking)등에 의해 침전조에서 SS carry-over, 슬러지 침강성 향상을 위한 고부하처리의 곤란성, 침전조 처리수에의 SS 유출등 고액 분리의 문제점을 해소하므로, 여과, 응집침전, 혹은 활성탄흡착등의 고도처리설비없이 양질이 처리수를 얻을 수 있다고 보고 되고 있다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.333-337
• /
• 2014

The purpose of this study is to develop a process technology to produce high hardness concentrated seawater removing chloride ions but containing useful minerals such as magnesium and calcium in the seawater desalination process. In order to make high hardness concentrated seawater, evaporation system is mostly used recently. Because evaporation system requires a large amount of energy consumption, in this study, it was aimed to produce high hardness concentrated seawater using membrane filtration requiring less energy. Nano filtration membranes were used for the experiments, and different types of high hardness concentrated seawater was produced depending on the membranes' specification, the number of times being concentrated, and pressure. As a result, at between 15bar and 20 bar in pressure, in between the second and the third times of concentration, the experiment result showed the best economic efficiency. By the experiment, production of high hardness concentrated seawater seemed to have a good economic feasibility.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.69-71
• /
• 1994

섬유폐수는 합성유기물인 염료와 발호공정에서의 호제가 다량으로 함유되어 있어 기존의 생물학적 처리법에 의한 처리가 용이하지 않다. 게다가 섬유산업은 여타산업에 비해 다량의 물을 소비하는 산업이다. 그동안의 산업의 고도 발전에 따라 앞으로는 물부족현상이 심해질 전망이며, 환경보전 및 보호에 대한 의식이 고취됨에 따라 이러한 섬유폐수의 처리도 이제까지와는 다른 새로운 방법으로 그 효율을 극대화할 필요성을 느끼게 되었다. 이에 따라 본 연구에서는 막분리 공정으로서 한외여과, 역삼투 공정을 이용하여 염색$\cdot$제직폐수를 고도처리하여 재활용이 가능토록 하였으며, 이를 바탕으로 염색$\cdot$제직폐수의 고도처리를 통한 재활용 시스템을 설계하였다.