• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.288-294
• /
• 2015

CRC function has been built into the high-speed semiconductor memory device in order to increase the reliability of data for high-speed operation. Also, DBI function is adopted to improve of data transmission speed. Conventional CRC(ATM-8 HEC code) method has a significant amounts of area-overhead(~XOR 700 gates), and processing time(6 stage XOR) is large. Therefore it leads to a considerable burden on the timing margin at the time of reading and writing of the low power memory devices for CRC calculations. In this paper, we propose a CRC method for low cost and high speed memory, which was improved 92% for area-overhead. For low-cost implementation of the CRC scheme by the DBI function it was supplemented by data bit error detection rate. And analyzing the error detection rate were compared with conventional CRC method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.13-18
• /
• 2015

The mutilevel holographic data storage offers considerable advantage for capacity, since it can store more than one bit per pixel. In this paper, we search the number of codewords for each code depending on three conditions: (1) the number of levels, (2) the number of pixels in a codeword, and (3) the minimum Euclidean distance of a code. Increasing the number of levels per pixel creates more capacity, while causing more errors, by reducing the noise margin. Increasing the number of pixels in a codeword can increase the code rate, which means more capacity, but increases the complexity of the encoder/decoder of the code. Increasing the minimum distance of a code reduces the detection error, while reducing the code rate of the code. In such a fashion, a system design will always have pros and cons, but our task is to find out an effective one under the given conditions for the system requirements. Therefore, the numbers we searched can provide some guidelines for effective code design.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.187-195
• /
• 1990

The following conclusions have been obtained with special reference to the walnut marketing system in Cheonwongun districts 1. The marketing channel of walnut in the producing areas was mainly depended on the individual selling by 89.58%. and sale through farmer's coops and forest owner's association by 10.42%, and share of walnut through fatmer's coops was 84.58%. 2. The market structure in assembling stage of walnut can be represented as oligopoly considering the market share of 86.26% derived by CR3 method. 3. Direct selling from producers to consumers would be recommendable to reduce marketing margin considering the 77.20% of sale's dependency on assembler-commisioner. 4. Two major reasons to follow the marketing channel of assembler-commissioner were the convieniency (45.00%) and dealing with small quantity of walnut (20.00%). Let the walnut producers follow the institutional marketing channels such as farmer's coops and forest owner s association, special actions including better conveniency, smaller quantity and the procedures should be improved. 5. Farmer's share of walnut was estimated as 54.93% and total marketing margin was 45.0% of which 36.70% destined to the retail stage. 6. The price index in November was the lowest(83.63) due to the flood and hunger sale and the index in April was the highest(115.74). To cope with the severe price fluctuation and to stabilize seasonal walnut price, sale's in advance, credit supply and provision of storage facilities must be considered in policy-making decision for forest farmers.

• Journal of Distribution Research
• /
• v.17 no.5
• /
• pp.113-128
• /
• 2012

The growth of market share of distributors' brands, also known as private brand, has accelerated in recent years. Sales volumes and market shares of private brands, as well as their appeal to consumers have steadily increased. Carrying private brands comes with numerous advantages, one of which is the relatively high gross margin, which can be 20 - 30% higher compared to manufacturer brands. Recently, many big discount stores are expanding private brand for higher sales volume. Thus, private brands play an important strategic role for retailers. The tendency of growing private brand will decrease sales revenue of both channel members, distributer and manufacturer. The disadvantage for manufacturer is obvious, especially for the manufactures who not only produce their own brands but also retailer brands competing against their own. There are also possible to weaken the brand awareness of manufacturer's brand. The purpose of this study is to explore the perception gap between retailers and manufacturers. we investigated to identify how consumers perceive private brand. In other to study the impact of private brands on distributors, we surveyed the actual condition of private brand and perception towards private brands among consumers, retailers and manufacturers. Based these analysis, we recommended proposal for private brand policies as follows: First, it need to correct imbalance between large retailer and manufacturer. second, we suggest "win-win growth policy", Third, by registering trademark right of national brand, manufacturers have a way of protecting their brands. Forth, manufacturers are encouraged to produce PNB(Private National Brand).

• Survey Research
• /
• v.7 no.1
• /
• pp.55-84
• /
• 2006

This study has classified development stages (Embryonic-Growth-Maturity) of mobile telecommunication industry based on Industry Life Cycle theory. There are two steps to be analyzed in this study, In the first step, cluster was investigated through cluster analysis using mobile density to categorize development stages of mobile telecommunication industry. In the second step, we compared on indexes of market structure, market efficiency and market performance to find out characteristics of each stage of development. The results are as follows. First, HHI is higher at embryonic stage than at growth and maturity stages, Second, ARPU(Average Revenue Per User) and RPM(Revenue Per Minute) are getting higher as the stages move on. Third, EBITDA margins, an index of market performance, is decreasing along the three stages. Finally, this study presents a clue to define the stage of development of mobile telecommunication industry and build a proper strategy for the market change.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.655-658
• /
• 2011

The possible application of Lactobacillus spp. as a functional starter culture to ferment galgeuntang (GT) and to produce bioactive isoflavone (daidzein) was investigated. Lactobacillus casei KFRI 127, L. plantarum KFRI 144, L. bulgaricus KFRI 344 were used for GT fermentation. Acid development and quantification of isoflavones using high-performance liquid chromatography were performed after fermentation at 37$^{\circ}C$ for 48 h. All the tested Lactobacillus spp. lowered pH to about 3.8 in 48 h and L. plantarum KFRI 144 exhibited 89.9% hydrolysis rate of daidzin (79.1-8.0 ${\mu}g$/mL) during fermentation. The content of daidzein in GT fermented with L. plantarum KFRI 144 was increased by 6.6-fold (3.6-23.9 ${\mu}g/mL$). These results demonstrate that L. plantarum KFRI 144 has potential as functional starter culture for manufacturing fermented GT with higher isoflavone bioavailability.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.156-162
• /
• 2013

In the communication between satellite and ground station, data rate can be determined from the data volume and required transmission time. Increasing data rate can be limited according to the available bandwidth. For the reason, it has been popularly studying on high spectral-efficient modulation scheme in large volume data application such as digital video broadcasting service. This paper presents the conceptual design of UHRIT broadcasting in GEO-KOMPSAT-2A (GK2A) mission by using DVB-S2 standard. Based on the recently determined data rate, UHRIT bandwidth was calculated at the various modulation schemes and code rates of DVB-S2 standard. Receiving performance of global user station was also evaluated thorough link analysis by considering that user station is located at the edge of beam coverage. Finally, maximum data rate was analyzed in a situation that COMS HRIT bandwidth should be alternatively applied for UHRIT downlink.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.463-478
• /
• 2008

A Distributed Translator Network(DTxR) is a cost-effective and frequency-effective method which can use existing transmission utilities and can be constructed in a shorter time as compared with Multiple Frequency Network(MFN) or Single Frequency Network(SFN) using On Channel Repeater(OCR). In order to verify the feasibility of DTxR, this field test was done in 30 points of north-west area in Seoul using 3rd, 5th, and 6th generation DIV receivers. Electric field strength, noise margin and ease of reception were measured and subjective evaluation of video quality was done in these points during the field test. With the test result, an improvement of receiving quality was obtained and an ease of reception was increased in case of the 5th. and 6th. receiver. From the results, we conclude that DTxR is a feasible method in DIV networks.

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.30-35
• /
• 2011

In this paper, we propose a method to improve the performance of initial channel estimation (CE) for the multiband-OFDM (MB-OFDM) UWB. The performance of the initial CE can be generally improved as increasing the number of the used preamble symbols. The MB-OFDM specification presents two CE symbols per band in preamble format. The performance of CE estimation with two CE symbols may be satisfied in relatively high sensitivity -77.5 and -72.5 dBm for 200 Mbps and 480 Mbps data rate, respectively, but can not be enough in the degraded 55 Mbps and 110 Mbps sensitivities such as -83.5 and -80.5 dBm, respectively. A method proposed in this paper achieves the performance improvement by extending CE estimation region to packet synchronization (PS) symbols and frame synchronization (FS) symbols including two CE symbols. This can improve the CE performance in the degraded SNR and increase the link-margin by reducing the error rate in physical-layer header. The link-margin improvement obtained by the proposed CE preamble can induce the decrease of error-rate in physical-layer header and increase of communication throughput. Simulation results for the proposed initial method show that the performance is improved by about 0.7 dB at 10-4 bit-error-rate using '4' symbols than initial method using only two CE symbols.

• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.1
• /
• pp.20-25
• /
• 2015

Objective:To review the patterns of the dermatologic consultations of psychiatric adolescent inpatient and to explore the relationship between the dermatologic disorders and psychiatric disorders. Methods:We retrospectively studied the data from 22 cases referred by psychiatric adolescent for a dermatologic consultation over 10 years in Daegu Catholic University Medical Center and compared with the data from 108 cases referred by the other department adolescent patients. Results:The mean age of patients was 15.9. The male to female ratio was 1:1.44. The most common psychiatric and dermatologic disorder was major depressive disorder and acne, respectively. The most frequent reason for consultation was to ask for dermatologic disease or condition(54.5%) followed by to perform cosmetic procedure of patients need(40.9%) and to perform dermatologic test(4.6%). Conclusions:More than just a cosmetic disfigurement, dermatologic disorders are associated with a variety of psychopathologic problems that can affect the patient. Increased understanding of biopsychosocial approaches and liaison among psychiatrists and dermatologists could be beneficial.