• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.123-130
• /
• 2008

A 3D structure production method for microstereolithography is a useful way that produces complex structures with flexible processes and low cost. Several UV curable resins were blended and the optimal resin for micro-lens fabricate was selected through viscosity, workability and transmission tests. It consists of 1, 6 - Hexanediol diacrylate with 15 Apha and Isobornyl acrylate for reducing some shrinkage. When fabricating a micro-lens array on large surface, some distortion of shape occurred because of the surface tension between cured part. To overcome this problem, the optimal processing conditions were derived from considering amount of the resin and surface tension. Large surface Micro-lens array, which are a type of elliptical convex and consist of 18,000 micro-lens in the range of 2cm*2cm were fabricated. The focal length to the X-axis and Y-axis were calculated. To verify the performance, measure an energy distribution of transmitted light from the Large surface Micro-lens array.

• 한국광학회지
• /
• 제27권1호
• /
• pp.25-31
• /
• 2016

이 전에 발표한 멀티스케일 기가픽셀카메라에 대한 두 편의 이론과 실험연구를 바탕으로 본 논문에서는 최종적이고 종합적인 28개의 구조방정식들을 도출하였다. 본 논문의 결과 식들을 활용하면 어레이카메라 방식으로 구성되는 멀티스케일 기가픽셀카메라의 광학구조에 대한 통찰적인 이해가 가능하게 될 것이고 완전하고 신속하게 다양한 구조인자 값들을 손쉽게 획득 할 수 있을 것이다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1332-1336
• /
• 2003

An experimental method is presented to maximize the replication quality of UV-molded micro-optical components. It is important to maximize the replication quality, because one can obtain the replicated micro-optical components with desired properties by accurate control of the shape. In the present study, a simple technique to avoid micro-air bubbles was first suggested. The effects of the UV-curing dose and the compression pressure on the replication quality of UV-molded structure were examined experimentally. Finally, as a practical application of the process design method, microlens arrays with diameters between 8 ${\mu}m$ and 96 ${\mu}m$ were fabricated by the present method, and the replication quality and the optical properties of the replicated microlens were measured and analyzed.

• 한국전자파학회논문지
• /
• 제8권1호
• /
• pp.73-82
• /
• 1997

본 논문은 77 GHz대의 차량용 레이다 안테나에 응용이 가능한 파라볼라 안테나, 렌즈 안테나,$32\times8$ 마이크로 스트립 페치 안테나 등에 대한 설제 및 실험 결과를 다루었다 파라볼라 안테나는 f /D=0.263 및 $7cm\times10cm$의 크기로 설계하였으며, 피드 안테나는 도파관 WR12를 개방한 개방 도파관 형태로 사용하였다. 렌즈 안테나 는 f /D=0.5 및 직경 lOcm로 하여 양딸록 및 반볼록 구조에 대하여 실험하였다. 그리고 페치 어레이 안테나는 페치 안테나에 대한 전송선로 모멜을 이용하여 설계하였다 .. 3개의 안테나에 대한 3 dB 빔폭, 방사 패턴, 이득 등 은 이론치와 실험치가 잘 일치하는 결과를 얻었으나, 페치 어레이 안테나인 경우에 피드 망 및 마이크로스트립 동축선-도파관 전이에 따른 손설로 인하여 이득이 약 25 dB 정도 감소를 보였다.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.472-477
• /
• 2011

This paper shows the method of fabrication of a micro lens array comprised of a Nipkow disk used in a large-area, high-speed confocal microscopy. A Nipkow disk has two components, a micro lens array disk and a pinhole array disk. The microlens array focuses illumination light onto the pinhole array disk and redirects reflected light from a surface to a sensor. The micro lens which are positioned in order on a disk have a hemispheric shape with a few tens of micron in diameter, and can be fabricated by a variety of methods like mechanical machining, semiconductor process, replication process like imprinting process. This paper shows how to fabricate the micro lens array which has a long focal length by reflow and imprinting process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.228-232
• /
• 2003

Mircolens and microlens arrays are realized using a novel fabrication technology based on the exposure of a resist, usually PMMA, to deep X-rays and subsequent thermal treatment. Hot embossing process is also studied for mass production. The fabrication technology is very simple and produces microlenses and microlens arrays with good surface roughness of several nm. The molecular weight and glass transition temperature of PMMA is reduced when it is irradiated with deep X-rays. The microlenses were produced through the effects of volume change, surface tension. and reflow during thermal treatment of irradiated PMMA. A hot embossing machine is designed and manufactured with a servo motor transfer system. The hot embossing process follows the steps of heating mold to the desired temperature, embossing a mold insert on substrate. cooling mold to the de-embossing temperature. and de-embossing. Microlenses were produced with diameters ranging from 30 to 1500 ${\mu}{\textrm}{m}$. The surface X-ray mask is also fabricated to realize microlens arrays on PMMA sheet with a large area.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.323-324
• /
• 2012

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.29-34
• /
• 2005

A optical head unit for nano optical probe away was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• 소성∙가공
• /
• 제15권1호
• /
• pp.34-41
• /
• 2006

Microlens arrays were fabricated by a modified LIGA process composed of the exposure of a PMMA (Polymethylmethacrylate) sheet to deep x-rays and subsequent thermal treatment. A successful modeling and analyses for microlens formation were presented according to the experimental procedure. A nickel mold insert was fabricated by the nickel electroforming process on the PMMA microlens arrays fabricated by the modified LIGA process. For the replication of microlens arrays having various diameters with different foci on the same substrate, both hot embossing and microinjection molding processes have been successfully utilized with the fabricated mold insert. Replicated microlenses showed very good surface roughness with the order of 1 nm. The focal lengths of the injection molded microlenses were successfully estimated theoretically and also measured experimentally.