• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.93-94
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.113-114
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.145-146
• /
• 2007

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.16-24
• /
• 2001

This paper presents an electromagnetic microactuator using the copper coil electroplated on the p+silicon diaphragm. The microactuator generates a vertical motion of the diaphragm using the radial direction, we propose a new actuator structure with twin magnets. The microactuator field in the radial direction, we propose a new actuator structure with twin magnets. The microactator shows a values of resonant frequency and quality factor in the ranges of 10.51${\pm}$0.22kHz and 46.6${\pm}$3.3, respectively. The twin magnet microactuator generates the maximum peak-to-peak amplitude of 4.4$\mu\textrm{m}$ for the AC rms current of 26.8mA, showing 2.4 times larger amplitude than the single magnet microactuator.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.139-139
• /
• 2003

많은 압전 후막은 여러 감지소자, 통신 및 사무자동화 기기, 전기 및 전자부품, 의료장비 및 국방산업에 까지 널리 응용되어 왔다. 그 중에서도 압전특성이 뛰어난 PZT 후막은 마이크로 펌프, 밸브, 헤드, 모터, 트랜스듀서 뿐 아니라 최근 바이오칩용 센서와 액추에이터로서 널리 연구되고 있다. 또한 마이크로 센서와 액추에이터 의 제작 및 구동을 위한 MEMS 기술의 도입으로 실리콘 베이스의 소자 개발이 집중되고 있다. 스크린 프린팅 방법은수 마이크론에서 수십 마이크론 후막의 실현이 용이하고 비교적 경제적이며 소자신뢰도가 높고 대량생산에 유리하여 활발한 연구가 진행 중이다. 그러나 후막은 벌크에 비해 기공률이 높고, 또 소자응용에 있어서 고온소결 시 MEMS공정을 위한 실리콘 베이스 기판과의 확산 및 반응에 의 한 계면 및 활물질 성능의 저하가 문제가 되고 있다. 따라서 본 연구에서는 스크린 프린팅과 더불어 졸 코팅 방법의 도입으로 후막의 성형 및 소결 밀도를 높임과 동시에 여러 확산 방지 막의 증착으로 capacitor 형 PZT 후막의 물성 및 전기 적 특성을 향상시키고자 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.115-121
• /
• 2005

Micromachines are extremely novel artifacts with a variety of special characteristics. Utilizing their tiny dimensions ranging roughly from 10 to $10^3$ micro-meters, the micromachines can perform tasks in a revolutionary manner that would be impossible for conventional artifacts. Micromachines are in general related to various coupled physical phenomena. They are required to be evaluated and designed considering the coupled phenomena. This paper describes finite element analysis (FEA) simulation of practical behaviors for the micro actuator. Especially, electric field modeling in micro actuators has been generally restricted to in-plane two-dimensional finite element analysis because of the complexity of the micro actuator geometry. However, in this paper, the actual three-dimensional geometry of the micro actuator is considered. The starting torque obtained from the in-plane two-dimensional analytical solutions were compared with that of the actual three-dimensional FE analysis results. The starting torque is proportional to $V^2$, and that the two-dimensional analytical solutions are larger than the three- dimensional FE ones. It is found that the evaluation of micro actuator has to be considered electrical leakage phenomenon.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.11
• /
• pp.1796-1801
• /
• 2001

For micro-machines, very few design methodologies based on optimization hale been developed so far. To overcome the difficulties of design optimization of micro-machines, the search method for multi-dimensional design window (DW)s is proposed. The proposed method is defined as areas of satisfactory design solutions in a design parameter space, using both continuous evolutionary algorithms (CEA) and the modified K-means clustering algorithm . To demonstrate practical performance of the proposed method, it was applied to an optimal shape design of micro electrostatic actuator of optical memory. The shape design problem has 5 design parameters and 5 objective functions, and finally shows 4 specific design shapes and design characters based on the proposed DWs.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1857-1862
• /
• 2008

Resonant frequency tuning of micro devices is essential to achieve performance uniformity and high sensitivity. Previously reported frequency tuning methods using electrostatic force or mass deposition are not directly applicable to non-conducting polymer devices and have limitations such as dielectric breakdown or low tunable bandwidth. In this paper, thermally frequency-tunable microactuators with poly-dimethylsiloxane membranes are proposed. Permanent and/or nonpermanent frequency tunings are possible using a simple temperature control of the device. Resonant frequency and Q-factor variations of devices according to temperature change were studied using a micro heater and laser Doppler vibrometer. The initial resonant frequencies determined by polymer curing and hardening temperatures are reversibly tuned by thermal cycles. The measured resonant frequency of 9.7 kHz was tuned up by ${\sim}25%$ and Q-factor was increased from 14.5 to 27 as the micro heater voltage increased from 0 to 70 V.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.6-12
• /
• 2008

The paper deals with the numerical analysis and design optimization of polysilicon micro thermal flexure actuator. The deflection of a thermal actuator is implicitly related to the actuation time so that such deflection is to be maximized under the consideration of structural performances such as maximum stress and natural frequencies. At first, the structural formulation of a thermal actuator is reviewed, and its CAE based simulation is performed to verify the numerical model. A parametric study is then conducted to identify the mainly effective design variables. Finally, the design of a micro thermal actuator is explored in the context of deterministic optimization and reliability based design optimization in the present study.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.39-47
• /
• 2005

In this paper, a novel high power micropump using active check valves in place of conventional passive check valves employed at the inlet and outlet ports is presented. It actively controls open/close motion of check valves using piezoelectric actuator for expansion/contraction of pump chamber. A prototype micropump having an effective size of $17mm{\times}8mm{\times}11mm$ is fabricated. Frequency-dependent flow rate characteristics, bi-directional flow characteristics and load characteristics are experimentally investigated using a timing control method for valve closing motion. From the obtained experimental results, it is ascertained that optimal values of the phase shift compared to the voltage to drive pump chamber are $15^{\circ}$ for inlet check valve and $195^{\circ}$ for outlet. Based on the obtained results, a sheet-type active shuttle valve that has a unified valve-body for inlet and outlet check valves is proposed. A micropump with an effective size of $10mm{\times}10mm{\times}10mm$ is fabricated and the basic characteristics are experimentally investigated.