• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.9-15
• /
• 2024

The effect of the residual impurity on the prepreg surface on the wettability of encapsulant for chip on board package was analyzed with microstructure, compositions and chemical bonds using a scanning electron microscope and X-ray photoelectron spectroscopy. As a result, the contact angle of w/ residual impurity sample was measured to be 28° higher than that of w/o residual impurity sample, and the C-O bond was decreased to be 4% lower than that of w/o residual impurity sample. The surface energy of the prepreg decreased because the impurity ions, Na and F, generated by the manufacturing process and wet etching, reacted chemically with the C on the prepreg surface, forming C-F bonds and breaking the C-O bonds on the prepreg surface. Therefore, the wettability of the encapsulant was degraded because the contact angle between the encapsulant and the prepreg was increased.

• Investigative Magnetic Resonance Imaging
• /
• v.9 no.1
• /
• pp.30-35
• /
• 2005

Purpose : The purpose of this study is to observe the blood oxygen level dependent (BOLD) contrast changes due to the reaction of human brain at a gustatory sense in response to a salty-taste stimulation. Materials and Methods : Twelve healthy, non-smoking, right-handed male subjects (mean age: 25.6, range: 23-28 years) participated in this salty-taste stimulus functional magnetic resonance (fMRI) study. MRI scans were performed with 1.57 GE Signa, using a multi-slice GE-EPI sequence according to a blood-oxy-gen-level dependent (BOLD) experiment paradigm. Scan parameters included matrix size $128\times128$, FOV 250 mm, TR 5000 msec, TE 60 msec, TH/GAP 5/2 mm. Sequential data acquisitions were carried out for 42 measurements with a repetition time of 5 sec for each taste-stimulus experiments. Analysis of fMRI data was carried out using SPM99 implemented in Matlab. NaCl solution $(3\%)$ was used as a salty stimulus. The task paradigm consisted of alternating rest-stimulus cycles (30-second rest, 15-second stimulus) for 210 seconds. During the stimulus period, NaCl-solution was presented to the subject's mouth through plastic tubes as a bolus of delivered every 5 sec using -processor controlled auto-syringe pump. Results : Insula, frontal opercular taste cortex, amygdala and orbitofrontal cortex (OFC) were activated by a salty-taste stimulation $(NaCl,\;3\%)$ in the fMRI experiments. And dosolateral prefrontal cortex (DLPFC) was also significantly responded to salty-taste stimuli. Activation areas of the right side hemisphere were more superior to the left side hemisphere. Conclusion : The results of this study well correspond to the fact that both insula, amygdala, OFC, DLPFC areas are established as taste cortical areas by neuronal recordings in primates. Authors found that laboratory-developed auto-syringe pump is suitable for gustatory fMRI study. Further research in this field will accelerate to inquire into the mechanism of higher order gustatory process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.175-175
• /
• 2011

인체감지 적외선 센서로 사용되는 마이크로볼로미터 센서 감지재료인 $V_{2-x}W_xO_5$를 증착하고 단위소자를 제작하여 저항 및 센서성능을 측정 조사하였다. 감지재료는 $V_2O_5$에 W을 첨가하여 $V_{2-n}W_nO_5$ 타겟을 제작하였으며 RF sputtering 장비를 이용하여 $V_{1.85}W_{0.15}O_5$ 박막을 증착하였다. 증착온도 $400^{\circ}C$, $Ar/O_2$ 가스비율 50/20, 두께 200nm로 증착된 센서 재료의 특성을 조사한 결과 저항은 약 $20{\sim}70k{\Omega}$이었으며, TCR 값은 -3%/$^{\circ}C$ 이상으로 매우 우수한 박막특성을 얻었다. 볼로미터소자는 $40{\times}40{\sim}140{\times}140um^2$의 셀면적으로 설계하여 전극패턴과 습식식각공정으로 센서 구조체를 제작하였다. 소자의 성능평가는 검출기 측정장비를 이용하여 반응도 및 탐지도 특성을 조사하였다.

• KSBB Journal
• /
• v.28 no.1
• /
• pp.24-30
• /
• 2013

Dissolved oxygen, pH and cell concentration have been online monitored in cultivation processes with Escherichia coli by using a $MABOOMS^{TM}$ (microplate-based bioreactor with optical online monitoring systems). Fluorescent sensing membranes containing Ru ${(dpp)_3}^{2+}$ or HPTS were prepared with GA sol-gel matrix and coated into a well of a 24-well microplate. Fluorescence intensity was measured and correlated to the dissolved oxygen or pH. Cell concentrations were also online monitored by measuring optical reflectance at 650 nm. A well of a 24-well microplate could also be divided into 4 parts, each of which was coated with fluorescent sensing membranes for the detection of dissolved oxygen or pH. The 24-well microplate coated with fluorescent sensing membranes or a 4-divided sensing membrane. was used to online monitor the dissolved oxygen, pH and cell concentration during E. coli cultivations. The online monitoring results showed the characteristics of cell growth in cultivation processes very well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.25-32
• /
• 2007

We investigated the silicide reaction stability between 10 nm-Col-xNix alloy films and silicon substrates with the existence of 4 nm-thick natural oxide layers. We thermally evaporated 10 nm-Col-xNix alloy films by varying $x=0.1{\sim}0.9$ on naturally oxidized single crystal and 70 nm-thick polycrystalline silicon substrates. The films structures were annealed by rapid thermal annealing (RTA) from $600^{\circ}C$ to $1100^{\circ}C$ for 40 seconds with the purpose of silicidation. After the removal of residual metallic residue with sulfuric acid, the sheet resistance, microstructure, composition, and surface roughness were investigated using a four-point probe, a field emission scanning electron microscope, a field ion bean4 an X-ray diffractometer, and an Auger electron depth profiling spectroscope, respectively, to confirm the silicide reaction. The residual stress of silicon substrate was also analyzed using a micro-Raman spectrometer We report that the silicide reaction does not occur if natural oxides are present. Metallic oxide residues may be present on a polysilicon substrate at high silicidation temperatures. Huge residual stress is possible on a single crystal silicon substrate at high temperature, and these may result in micro-pinholes. Our results imply that the natural oxide layer removal process is of importance to ensure the successful completion of the silicide process with CoNi alloy films.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.531-542
• /
• 2012

The thesis covers the trend of research on bio-based polyurethane which is made from polyols derived mainly from plant oils and isocyanates. Castor oil is a triglyceride of ricinoleic acid containing hydroxyl group. Hydroxylation is done on the unsaturated bonds of the oils by the reactions of epoxidation/ring opening, hydroformylation/hydrogenation, ozonolysis/hydrogenation, and thiol-ene reaction. Polyols from hyperbranch, primary alcohol, polysaccharide have been studied to control the reactivity of the polyol and morphology of the microdomains. Besides, researches cover biodegradable polylactic acid polyol for medical use, fatty acid dimer polyol for the prevention of hydrolysis, and polyol with ionic group for water-borne polyurethane. Bio-based polyurethanes are being used in flexible and rigid foams, coatings, sealants, and elastomers.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.95-103
• /
• 2005

The interfacial reaction between 42Sn-58Bi solder (in wt.$\%$ unless specified otherwise) and electroless Ni-P/immersion Au has been investigated before and after thermal aging, with a focus on formation and growth of an intermetallic compound (IMC) layer, consumption of under bump metallurgy (UBM), and bump shear strength. The immersion Au layer with thicknesses of 0 (bare Ni), 0.1, and $1{\mu}m$ was plated on the $5{\mu}m$ thick electroless Ni-P ($14{\~}15 at.\%$P) layer. Then, the 42Sn-58Bi solder balls were fabricated on three different UBM structures by screen-printing and pre-reflow. The $Ni_3Sn_4$ layer (IMC1) was formed at the joint interface after pre-reflow for all the three UBM structures. On aging at $125^{\circ}C$, a quaternary phase (IMC2) was observed above the $Ni_3Sn_4$ layer in the Au-containing UBM structures, which was identified as $Sn_{77}Ni{15}Bi_6Au_2$ (in at.$\%$). The thick $Sn_{77}Ni{15}Bi_6Au_2$ layer deteriorated the integrity of the solder joint and the shear strength of the solder bump was decreased by about $40\%$ compared with non-aged joints.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.376-383
• /
• 2011

The CMCs of LA and LA3 nonionic surfactants obtained from the reaction between glycidol and lauryl alcohol were found to be $0.97{\times}10^{-3}mol/L$ and $1.02{\times}10^{-3}mol/L$ respectively and the surface tensions for 1 wt% surfactant were 26.99 and 27.48 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer showed that the adsorption rate of surfactant molecules at the interface between the air and the surfactant solution was found to be relatively fast in both surfactant systems, presumably due to the high mobility of surfactant molecules. The contact angles of LA and LA3 nonionic surfactants were 27.8 and $20.9^{\circ}$ respectively and the dynamic interfacial tension measurement by a spinning drop tensiometer showed that interfacial tensions at equilibrium condition in both systems were almost the same. Also both surfactant systems reached equilibrium in 2~3 min. Both surfactant solutions showed high stability when evaluated by conductometric method and the LA nonionic surfactant system provided the higher foam stability than the LA3 nonionic surfactant system. The phase behavior experiments showed a lower phase or oil in water (O/W) microemulsion in equilibrium with an excess oil phase at all temperatures studied. No three-phase region was observed including a middle-phase microemulsion or a lamellar liquid crystalline phase.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.252-252
• /
• 2010

적외선 센서는 빛의 유무에 관계없이 주 야간 전방의 물체에서 발산하는 미약한 적외선(열선)을 감지하여 영상으로 재현하는 열상시스템은 자동차 야간 운전자 보조용 나이트 비젼, 핵심 시설의 감시 관리, 군수 등의 분야에 적용되어지고 있는 최첨단, 고부가가치를 지니고 있는 기술이다. 양자형은 센서 특성은 좋으나 냉각기(작동온도: $-196^{\circ}C$) 및 고진공 패키지인 dewar를 사용하는 반면에, 열형은 대부분 상온에서 동작되는 온도안정화를 위한 전자냉각모듈만을 구비하면 되므로 저가형으로 제작이 가능한 비냉각형 적외선 센서이다. 본 연구에서는 적외선 센서용 진공패키지 조립공정 및 패키지된 센서의 측정기술을 개발하였다. 금속 메탈패키지를 제작하였으며, 금속 진공패키지는 소자냉각용 TE Cooler와 장수명 진공유지를 위한 getter, 그리고 센서칩, 온도센서를. 장착하여 칩을 조립하였다. Cap ass'y와 base envelop의 솔더링 공정을 수행하였으며, 진공패키지의 진공유지를 위해 TMP를 이용하여 진공을 유지하고, 약 5일동안 패키지 bake-out을 수행하였다. 진공압력은 $10^{-7}\;torr$ 이하를 유지하였으며, getter를 활성화시키고, pinch-off 공정으로 조립 ass'y를 완성하였다. 진공 패키지의 기밀성은 He leak tester를 이용하여 측정하였으며, ${\sim}10^{-9}\;std.cm^3/sec$로 기밀성을 유지하였다. TE cooler를 작동한 온도안정성은 0.05 K 이하였다. 볼로미터 센서의 반응도는 $10^2\;V/W$ 이상을 나타내었으며, 탐지도는 $2{\times}10^8cm-Hz^{1/2}/W$를 나타내었다. 본 연구를 통하여 얻어진 결과는 향후 2차원 열영상용 어레이 검출기 및 웨이퍼수준의 패키징 공정에 유용하게 응용될 것으로 판단된다.

• The Korean Journal of Pharmacology
• /
• v.27 no.1
• /
• pp.69-80
• /
• 1991

Inhibitory effects of quercetin and rutin on lipid peroxidation of microsomes caused by iron(II) were investigated with respect to the scavenging action for oxygen radicals produced during oxidation of iron and the chelating action for iron. Lipid peroxidation by $Fe^{2+}$ alone was markedly inhibited by quercetin or rutin in a dose dependent fashion. Lipid peroxidation by ascorbate or NADPH in the presence of $Fe^{2+}$ was almost completely inhibited by both quercetin and rutin. The peroxidative action of $Fe^{2+}$ was inhibited by SOD and DABCO and slightly inhibited by catalase, DMSO and mannitol. Quercetin and rutin inhibited oxidation of $Fe^{2+}$ which is responsible for DETAPAC and they showed a significant initial chelating effect. Quercetin and rutin effectively inhibited lipid peroxidation by $H_{2}O_{2}$ and decomposed $H_{2}O_{2}$. Both $OH{\cdot}$ production in the presence of $Fe^{2+}$ and $^1O_2$ production by U.V. irradiation were inhibited by quercetin and rutin. Lipid peroxidations by $Cd^{2+},\;Cu^{2+},\;Ni^{2+},\;Pb^{2+}$ and $Zn^{2+}$ were almost completely inhibited by quercetin. Quercetin and rutin significantly prevented the loss of sulfhydryl groups by $Fe^{2+}$. These results suggest that inhibitory effects of quercetin and rutin on the peroxidative action of $Fe^{2+}$ in the presence or absence of ascorbate and NADPH may be attributable to their scavenging action on reactive oxygen species and chelating action on iron.