• Proceedings of the Korean Magnestics Society Conference
• /
• 2015.05a
• /
• pp.108-109
• /
• 2015

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.84-84
• /
• 2016

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.3
• /
• pp.31-39
• /
• 1968

In this paper microwave power propagated through the cold plasma was analyzed and measured with respect to the external magenetic flux density. The d. c discharge plasma was in the rectangular waveguide in which two electrode was inserted, and also the glass diseharge tube inserted in the ractangular wavegside. The direction of microwave pro-pagation, the axis of the discharge tube and external magnetic flux were perpendicular to each other. It showed that the attenuation and absorption of micro wave power propagated in the plasma was increased as the magnetic flux density, the discharge current and the pressure of the gas were increased.

• 전기의세계
• /
• v.41 no.10
• /
• pp.16-23
• /
• 1992

원적외선의 이용은 에너지절약을 목적으로한 효율이 높은 열전파형태로서 주로 응용되고 있다. 따라서 방사체의 적외선 방사특성과 피가열체의 적외선 흡수특성과의 관계가 먼저 명확하게 규명되어야 한다. 그러면, 그 흡수특성과 정합된 원적외선 방사세라믹스의 제작도 가능하게 되어갈 것이므로 원적외선의 작용효과가 각종 분야에서 이용되어 갈 것이다. 예를들면 의료분야에서 과거에는 인체의 일부를 가온할 필요가 있을 때에는 고주파전류, 마이크로파 또는 환부를 유동 파라핀속에 넣어 환부를 따뜻하게 하는 방법 등이 있지만 만약 어떤파장의 원적외선이 인체의 피부 깊숙이 투과가 가능하다면 마이크로파 방생장치 대신에 원적외선의 발생장치가 값이 저렴하고 기온부를 국소로 제한 할 수 있으므로 널리 사용되어질 것이다. 또 식품분야에서는 에너지절약의 관점에서 뿐만아니라 조리의 관점에서도 원적외선의 이용이 진전되어 갈 것으로 생각된다. 한편 원적외선센서의 진전은 놀랄만하여 앞으로 초전도세라믹스를 이용한 원적외선 검출의 죠셉슨센서는 더욱 진전되어 질것으로 생각된다. 어떻든 각종 원적외선방사 세라믹스의 개발과 원적외선 영역에서의 파장 특성에 대한 측정법이 확립되어짐에 따라서 원적외선 이용은 앞으로 각종방면에 진전되어질 것이다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.06a
• /
• pp.186-187
• /
• 2004

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.87-96
• /
• 1999

For analog optical transmission of narrow-band microwave signal, a novel all-optical linearization technique of electro-absorption (EA) optical modulator by using dual modulation scheme is proposed and theoretically investigated. By using the dual modulation scheme where the sub-modulator has a different length, DC bias and band-gap wavelength, the DC bias operation point where the third-order intermodulation products of ~30dB and the following increase of spurious free dynamic range (SFDR) of ~20dB wave achieved in sub-octave narrow band operation.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.74-78
• /
• 2015

We measured the low field microwave absorption (LFMA) and ferromagnetic resonance (FMR) signals at various magnetic field angle in exchange biased CoFe/MnIr thin film. The LFMA signals were dominantly related to the magnetization rotation process. In order to analyze the LFMA signal, we calculated transverse magnetization ($M_{\tau}$) and permeability (${\mu}_{\tau}$) for CoFe/MnIr thin film by using S-W model, which magnetic parameters of exchange bias ($H_{ex}$ = 58.5 Oe) and uniaxial anisotropy field ($H_k$ = 30Oe) was obtained from FMR signals. The LFMA signal at hard axis showed similar behavior compared with that of $M_{\tau}$. As the magnetic field angle approach to the perpendicular to hard axis, the LFMA signals were depending on both of $M_{\tau}$ and ${\mu}_{\tau}$.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.427-433
• /
• 2005

The use of the microwave-assisted process for the extraction of effective constituents from ginseng was investigated at various operating conditions. The influence of solvent (ethanol-water, 50% v/v) to ginseng ratio, particle size and applied microwave power on the efficiency of extraction was examined. The microwave extraction system used was custom manufactured so that the intensity of microwave may be varied by using anode-voltage controller. It was found that the ratio of 6 : 1 (vol/mass) gave a good extraction efficiency. Small particle size gave high yield but it caused difficulties in the separation of solvent from the sludge. The higher power was no guarantee of the efficient extraction yield. The more important factor than the employed power was the adequate temperature under sufficient contact time. Using deionized-water as swelling agent, the degree of swelling of ginseng by microwave heating and conventional heating in water-bath was also studied. It was observed that the microwave heating enhanced the swelling much more than the conventional heating. It is believed that this enhanced swelling was responsible for the rapid microwave-assisted extraction rate.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.41-48
• /
• 2002

The bandwidth limitation of traveling-wave electroabsorption modulator(TW-EAM) is determined by the transit time, the velocity-mismatch between optical-wave and microwave, the impedance-matching, the dispersion and the microwave loss. In this paper, we introduce an hovel impulse response of TW-EAM considering transit time as well as velocity-mismatch. We analyze the effect of transit-time and velocity-mismatch at the same time, using the FDTD method. We investigate the modulation bandwidth by changing the depth of the intrinsic region. We suggest that the optimum depth of the intrinsic region is 0.2${\mu}{\textrm}{m}$ when the absorption coefficient($\alpha$) is 0.2${\mu}{\textrm}{m}$-1.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.37-45
• /
• 2002

In this paper, the microwave characteristics of traveling-wave electroabsorption coplanar waveguide modulator have been analyzed and optimized precisely by using the 3-dimensional finite-difference time-domain method (FDTD). Microwave characteristics are affected by the thickness of intrinsic layer, the width of meas, and the distance between signal electrode and ground electrode on traveling-wave type structure. In case that intrinsic layers are composed of InAsP/InGaP (1.3Q), the optimized distance between signal electrode and ground electrode, the optimized intrinsic region thickness and the width of waveguide are founded to be $3{\mu}m,\;039{\mu}m\;and\;2{\mu}m$, respectively, to minimize microwave loss and to obtain velocity and impedance matched structure. By using the FDTD, we could design the traveling-wave electroabsorption modulator more precisely.