• ETRI Journal
• /
• v.14 no.4
• /
• pp.217-227
• /
• 1992

최근 이동통신 및 위성통신 등 마이크로웨이브를 이용하는 통신분야의 시장이 급속히 신장됨에 따라 RF(Radio Frequency) 부품의 산업적 중요성이 부각되고 있다. RF 부품은 크게 능동부품과 필터로 대표되는 수동부품으로 대별되는데, duplexer나 필터는 현재 대부분 마이크로웨이브 세라믹유전체를 사용 제조하고 있다. 본 연구에서는 이들 부품들에 사용가능한 세라믹유전체를 개발하기 위한 연구의 일환으로 BaO-$Sm_2$$O_3$-$TiO_2$계 세라믹의 마이크로웨이브 유전특성과 여기에$La_2\$$O_3$를 첨가한 계인 BaO-($Sm_1$$-_X$$La_X$$)_2$$O_3$-$TiO_2$ 세라믹유전체를 제조하여 마이크로웨이브 유전특성을 살펴보았다. RF 부품에 사용되는 세라믹유전체는 높은 유전율$\varepsilon_r$높은 품질계수 (Q) 및 안정된 온도특성 $\tau_f$ 등의 조건을 충족시켜야한다. 본 연구에서는 유전체의 $\varepsilon_r$ 및 Q의 측정에 디스크형 유전체공진기와 두개의 도체평행판을 사용한 Hakki-Coleman법을 사용하였으며, $\tau_f$는 fixture를 항온조에 넣어서 측정하였다. BaO-$Sm_2O_3-TiO_2$계의 경우 소결온도 $1350^{\circ}C$까지는 $\varepsilon_r$및 Q가 증가하나 그 이상의 소결온도에서는 감소한다. 그리고 $\tau_f$는 $-35_{ppm}/^{\circ}C$에서 소결온도에는 거의 의존하지 않았다. $La_2O_3$를 첨가한BaO-($Sm_1$$-_X$$La_X$$)_2$$O_3$-$TiO_2$ 세라믹의 마이크로웨이브 유전특성은 $La_2O_3$의 첨가량이 많을수록 $\tau_f$값이 음에서 양으로 이동함이 관찰되었으며, x=0.15에서 $\tau_f$가 0이 되어 마이크로웨이브 부품용 마이크로웨이브 세라믹유전체를 얻을 수 있음이 확인되었다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.95-107
• /
• 2009

The purpose of this research was to examine the fitness of zirconia cores that were made by different sintering methods; generic electricity furnace and microwave furnace. Firstly, 12 cores for each group were made by using each different sintering process and attached them to a metal die with silicon. The internal and marginal gap of sintered zirconia was measured by using Skyscan 1076 micro-CT, then it was reorganized by CT-An software. To each samples, we extracted B-L image, M-D image of cutting side, and cross-sectional side of tooth long axis and calculated the mean value of marginal, axial, and occlusal gap each side. Results: 1. The mean marginal gap of sintered zirconia was $36.20{\mu}m$ for EVE, $47.67{\mu}m$ for LAV, $52.47{\mu}m$ for DEN, and $54.63{\mu}m$ for CER. 2. For the axial wall, the research showed the largest value of $63.49{\mu}m$ for EVE, but there were no statistical significance. 3. In related to the occlusal internal measurement, DEN showed the smallest value ($77.06{\mu}m$), EVE and CER showed significantly high value. From this study, it is suggested that CAD/CAM zirconia core which was made in the process of microwave sintering has clinically acceptable values in marginal and internal gap.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.05a
• /
• pp.61-62
• /
• 1991

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.200.1-200
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.669-674
• /
• 2002

Ni-Zn ferrite was sintered by microwave hybrid sintering method using microwave energy of 2.45 GHz, 700 W in the temperature range of 900$^{\circ}C$ ∼ 1070$^{\circ}C$. A high density (98%TD) Ni-Zn ferrite, added Bi$_2$O$_3$ and CuO, with a single phase was obtained by microwave sintering at 970$^{\circ}C$ for 15 min. All the sintered samples showed sintered density over 90% of TD. These results indicate that the processing time and energy consumption can be reduced significantly by microwave hybrid sintering method.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.29-33
• /
• 2003

최근 이동 정보통신 분야의 발전에 따라 단말기 및 관련 부품들을 소형 경량화 하는 것이 매우 중요한 기술요소로 부각되고 있다. 이를 위해서는 기판의 배선밀도를 높이는 것과 개별 부품 또는 모듈의 크기와 무게를 줄이는 것이 절실히 필요하며, 이러한 요구에 부응하기 위해 기존의 다층 PCB 기술이나 MCM 기술에 비해 우수한 배선밀도와 양호한 전기적 특성을 갖는 저온 동시소성 세라믹(Low Temperature Co-fired Ceramic) 기술이 개발, 적용되고 있다. 본 논문에서는 이러한 LTCC 기판의 소결에 있어 기존의 소결 공정인 전기로 소결 공정과 microwave를 이용한 소결 공정을 이용하여 소결 하였을 때, LTCC 기판의 수축율과 무게감소, 그에 따른 밀도변화, SEM 을 이용한 표면형상 분석을 통해 급속가열을 통한 공정시간의 단축, 낮은 에너지 소비로 인한 제조단가의 절감, 균일한 가열로 인한 소결온도의 저하 등의 장점을 갖는 microwave sintering 을 적용할 수 있는 가능성을 제시하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.05a
• /
• pp.84-84
• /
• 1998

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.259-259
• /
• 2007

The low temperature sintering of dolomite type borates, $CaZr(BO_3)_2$[CZB] ceramics and their microwave dielectric properties were investigated The sintering temperature of CZB ceramics could be reduced from $1150^{\circ}C$ to $925^{\circ}C$ by the addition of sintering additive. $CaZrO_3$, $ZrO_2$ and $CaB_2O_4$ second phases were found in the CZB ceramics. The syntheses, sintering properties, microstructures, and dielectricnproperties of dolomite-type borates were examined by XRD, thermal analysis, electron microscopy, network analyzer, and the results are discussed intensively. The compatibility with silver electrode was also explored.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.694-696
• /
• 2010

We have synthesized boron (or phosphorous) doped silicon nanoparticles (Si-NPs) by a solution process. The surfaces of the Si-NPs were terminated with various alkyl groups to form a protecting layer. The Si-NPs were characterized by UV-Vis, PL, FTIR, and NMR. Through a microwave sintering process, the crystalline thin films of the Si-NPs were prepared by removing the surface alkyl groups. The TEM and SEM images reveal that contiguous films as large as $200{\mu}m$ in diameter were formed with a cubic structure. The electrical conductivity of the Si film was controlled by a doping type.

• Journal of Technologic Dentistry
• /
• v.34 no.1
• /
• pp.11-21
• /
• 2012

Purpose: Densification and mechanical properties of dental zirconia ceramics were evaluated by different sintering methods. Materials and Methods: Y-TZP zirconia block(Kavo $Everest^{(R)}$ ZS blank, Kavo dental GmbH, Bismarckring, Germany) was used in this study. Sintering were performed in heat sintering furnace and microwave sintering furnace, and then experimented and analyzed on a change in densification according to the sintering time, a change in densification according to thickness, flexural strength and micro-structure in zirconia specimens. Results: Microwave sintering was very effective in considerable mechanical properties such as flexural strength and bulk density was drastically increased than conventional electric heating method. It is also shown that microwave sintering time was faster and more economical than common method to be present in qualities which equal or exceed. Conclusion: It will be important to seek the accurate sintering condition of dental zirconia by microwave sintering method and the continuous research is necessary for the study of relationship between sintering methods and mechanical properties.