• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.8-12
• /
• 1975

Silvester의 다중영상법을 이용하여 결합마이크로스트립 특히 비대칭 결합마이크로스트립의 특성을 해석하여 특성정수 및 스트립도체상의 전하분포를 구하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1724-1732
• /
• 2001

In this paper, a technique for increasing the bandwidth of microstrip array antennas using the parallel coupled lines on a single layer is presented. Four types of wideband microstrip array antenna are designed and the characteristics of each type are analyzed. In addition, an iterative method using a distributed network is proposed to design the parallel coupled lines as a wideband impedance matching network. Measurements show that the proposed antennas provide wider bandwidths ∼1.7 times those of conventional microstirp array antennas, while the sizes of proposed antennal are the same as that of a conventional array. And low cross-polarization level can be obtained through symmetrical locations of the parallel coupled lines section

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.23-30
• /
• 1998

The use of microstrip is very common for various passive microwave devices because of the rather simple and planar structure. However, many microstrip devices require fairly large surface areas, which results in real estate problems of finite substrates. In this paper, we proposed a perforated microstrip with longitudinal slow-wave effect and characterized experimentally and theoretically. The impedance matching to the reference impedance(50 $\Omega$) and the quality factor are greatly improved compared to the conventional slow-wave structure with modulated strip. Because of the structural simplicity, it can be easily applied to miniaturize many microstrip devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9B
• /
• pp.1196-1202
• /
• 2001

본 논문에서는 대역통과 필터특성을 위해 통과대역의 상단과 하단의 저지대역에서 감쇄극을 갖는 두 종류의 새로운 마이크로스트립 구조를 제안한다. 이 구조는 TEM모드의 유전체 공진기를 마이크로스트립선로에 용량성 또는 유도성의 병렬 포스트와 연결하여 구성된다. 제안한 구조에 대한 등가회로를 추출하였다. 이 구조의 S-파라미터를 실험과 등가회로 시뮬레이션으로 구하였고, 그리고 유도성포스트의 경우는 3D-FDTD 계산을 추가하여 서로를 비교하였는데 등가회로 모델이 이들 결과와 매우 잘 일치하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.139-140
• /
• 2006

본 논문에서는 4포트 마이크로스트립 인터커넥트에 대한 새로운 등가모델을 제시하였다. 제시된 방법에서는 마이크로스트립 인터커넥트 중 선로의 방향이 변하는 부분에서 등가회로 파라미터인 커페시터 성분을 모델화하여 최적화 과정을 통해 값을 추출하였고, 시뮬레이션 결과와 측정치를 비교함으로써 등가회로모델의 유효성을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8B
• /
• pp.1041-1047
• /
• 2001

초고주파 회로에서 광범위하게 이용되는 평행 결합 마이크로스트립 대역통과필터는 2차 스프리어스 통과대역으로 필터의 응용을 제한한다. 이와 같은 문제를 해결하기 위해서 복합 유전체기판을 사용하는 방법을 제시하였다. closed-form 해석방법을 이용하여 복합 유전체기판상에 결합 마이크로스트립 선로를 해석하고 중심주파수 9GHz에서 정규화 대역폭 20%을 갖는 필터를 제작하였다. 단층기판을 갖는 필터와 비교하면 복합기판을 이용한 필터는 스프리어스 통과대역이 개선됨을 보였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.173-173
• /
• 2004

In this paper, a wideband two-layer H-shaped microstrip antenna for WLAN is designed. To increase the bandwidth of microstrip patch antenna a configuration of stacked type using parastic element is used. Furthermore, to reduce the size of microstrip patch antenna, two techniques are employed . the first one is H-shaped patch type and the second one is that the main radiator and parastic patch are shorted to the ground plane using ten shorting posts. The antenna bandwidth and radiation characteristics are calculated by ENSEMBLE ver. 5.0 simulation software, and compared with the experimental results. Experiment results show that the bandwidth of antenna in 740㎒ centered at 5.46㎓(13.5%), which is close agreement with the calculations, 770㎒(13%). Also, the antenna size can be reduced by 71.5% compared with the half wavelength rectangular microstrip antenna using the same substrate at the same frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.305-316
• /
• 1998

The impedance matching network with the simplfied real frequency technique (SRFT) is proposed as a method for bandwidth enhancement of microstrip antenna. The validity of the technique is based on the relative frequency insensitivity of the radiation pattern and gain characteristics as compared to the resonant behaviour of the input impedance. The most significant feature of this technique is that there is no need to find any analytical description of the antenna and generator, and it only utilizes directly real frequency generator and load data over the prescribed frequency band. Furthermore, it is not necessary to invent an analytic form of the system transfer function to assume a matching network topology in advance. In this paper, the transmission line model is used to investigate the rectangular microstrip antenna, and based on the Fano's bandwidth-enlargement theory, the SRFT is introduced to design the matching networks of microstrip antennas in order to obtain a constant gain over the frequency band of interest. Two representative microstrip antnnas with different structure are fabricated and tested. From these procedures, it is obtained that the proposed impedance matching networks of microstrip antenna improve the impedance bandwidth nearly three times compared to the antenna without them.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.13-19
• /
• 2008

The main advantage of the TLM analysis method is the ease with which even the most complicated transmission line structures. In this paper, using symmetrical condensed node(SCN), the TLM numerical technique has been successfully a lied to microstrip meander line. A detailed technique of the symmetrical condensed node(SCN) may be used to model planar microstrip transmission line is presented. Also, the S-parameters $S_{11}$ and $S_{21}$ of two types of microstrip meander line have been computed. From obtained results, TLM analysis is shown to be an efficient method for modeling complicated structure of planar microstrip transmission line. The TLM results presented here are useful in the design of microwave integrated circuits at higher frequencies region.