• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.211-217
• /
• 2019

In this study, the change of skin condition was analyzed by skin analysis equipment using scrub cosmetics, and the morphological characteristics of microbead were observed by dermascope and scanning electron microscope. In the dermascope observation, during the process of cleansing, the microbeads attached to the skin existed in close contact with each other or dispersed. The skin after scrubbing was clean and smooth and the fine wrinkles between epidermal keratinocytes were reduced. In the scanning electron microscopic observation, the microbead surface did not have severe bending or rough surface. The skin moisture and oil content were higher than the scrub skin before the scrub, and there was no significant difference in the pH.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.399-404
• /
• 2004

Novel GHK-conjugated chitosan was prepared by the solid-phase method using $N^{\alpha}-Fmoc$ amino acids/BOP coupling reagent. For this purpose, the chitosan microbeads which had a mean diameter of 70 um were prepared by the W/O emulsion-phase separation method. The GHK was successfully coupled to the chitosan microbeads by stepwise solid-phase method. The result of amino aid analysis was in good agreement with the theoretical values; $Gly_{1.02}\;of\;His_{1.13}\;Lys_{0.96).$. The cell proliferation effect of the GHK-bound chitosan microbeads was measured by MTT assay. We concluded that GHK-bound chitosan microbeads gave higher cell Proliferation effect than chitosan microbeads.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.1
• /
• pp.7-24
• /
• 1998

게 껍질로부터 얻은 키틴을 탈아세틸화하여 키토산을 얻었으며, 얻어진 키토산의 유기용매에 대한 용해성을 향상시키기 위해 알칼리 조건에서 고압반응ㅇ기를 사용하여 프로필렌옥사이드와 반응시켜 치환율 3.5의 히드록시프로필 키토산을 합성하였다. 합성된 히드록시프로필 키토산은 고체상 CP/MAS 13C-NMR, 1H-NMR, FT-IR을 통해 반응이 키토산의 6번 탄소의 수산기와 2번 탄소의 아민기에 주로 일어났음을 알 수 있었다. 또한 X-선 회절분석을 통해 키토산의 결정성이 프로필렌옥사이드와의 반응에 의해 크게 감소하였음을 알 수 있었고, 그 결과 유기 용매에 대한 용해성이 현저히 증가되는 현상을 나타내었다. 한편, 히드록시프로필 키토산을 수상에 녹인 후 W/O 에멀젼상에 서 알칼리 촉매를 사용항 에피클로로히드린과 가교반응을 실시한 결과 내부가 비어있는 중공 마이크로비드를 얻을 수 있었다. 전자현미경을 통한 분석결과 중공 마이크로비드의 껍질의 내부에는 스킨층이 형성되어 있었으며, 외부 표면은 다공성이 높은 비대칭 막으로 되어 있음을 확인할 수 있었다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.16-21
• /
• 2015

The micro device, coil, and channel for the biosensor integrated with the GMR-SV device based on the antiferromagnetic IrMn layer was fabricated by the light lithography process. When RBCs coupled with several magnetic beads with a diameter of $1{\mu}m$ passed on the micro channel, the movement of $RBC+{\mu}Beads$ is controlled by the electrical AC input signal. The $RBC+{\mu}Beads$ having a micro-magnetic field captured above the GMR-SV device is changed as the output signals for detection status. From these results, the GMR-SV device having the width magnitude of a few micron size can be applied as the biosensor for the analysis of a new magnetic property as the membrane's deformation of RBC coupled to magnetic beads.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.102-107
• /
• 2011

In this paper, a microfluidic array biochip for simultaneously detecting multiple antigen-antibody bindings was designed and implemented. The biochip has the single channel in which microreaction chambers are serially connected, and the antibody-coated microbeads are packed in each microreaction chamber. In addition, the weir structure was fabricated in the microchannel using the gray-scale photolithography in order to trap the microbeads in the microreaction chamber. Three kinds of antibodies were chosen, and the antibodies were immobilized onto the microbeads by the streptavidin-biotin conjugation. In the experiment, as the fluorescence-labeled antigens were injected into the microchannel, the antigen-antibody bindings were completed in 10 minutes. When the solution with multiple antigens was injected into the microchannel, it was observed that the fluorescence intensity increased in only the corresponding microreaction chambers with few non-specific binding. The microfluidic array biochip implemented in this study provides, even with the consumption of tiny amount of sample and fast reaction time to simultaneously detect multiple immunoreactions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.2
• /
• pp.49-56
• /
• 1995

Chitosan microcapsules and microbeads were prepared by W/O emulsion method, and their morphologies were observed through SEM. The microcapsules have skin layer of 8 Um and 250 Um of mean diameter, The swelling test showed higher s welling ability in protic solvents than in aphotic solvents. After containing moth-yl violet in the microcapsules, the release patterns were investigated. The results sho wed that the addition of Iysozyme in pH 5.1 acetate buffer accelerated the re-lease rate. In case of the microbeads, the mean diameter was about 70 Um. The surface of the microbeads showed porous structures. The swelling ability of the beads revealed two times higher than the one of the microcapsules.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.171-172
• /
• 1996

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.160-163
• /
• 1998

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2008

In this study, the microsphere silicone polymer beads were synthesized by UV irradiation and alkoxy hydrolysis. The coefficient of variation (CV) of microsphere silicone polymer beads were decreased with increasing UV intensity, reaction time. The mean particle diameter, refractive index, and pH value were $4.1{\mu}m$, 1.43 and 7.5, respectively. Also, the true and bulk specific gravity, moisture content were 1.30, and 0.40, below 2%. The mean particle diameter and CV were the lowest at 0.1 wt% hexamethyldisilazane (HMDS) and their roundnesses were $0.95{\sim}0.98{\mu}m$ values. The particle dispersion index of microsphere silicone polymer beads was 4.92 at 450 W, 90 min and the yield was increased to 11.3% at 20 wt% methyltrimethoxysilane (MTMS). The mean particle diameter was decreased with increasing the stirring rate and reaction temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1429-1434
• /
• 2004

Immunoassay is one of the important analytical methods for clinical diagnoses and biochemical studies, but needs a long time, troublesome procedures and expensive reagents. In this study, therefore, we propose the micro filter chip with microbeads for immunoassay, which has pillar structures. The advantage of the proposed micro filter chip is to use simple fabrication process and cheap materials. The mold was made by the photolithography technique with Si wafer and negative photoresist SU-8. The replica was made of PDMS, bonded on the pyrex glass. The micro filter chip consists of inlet channel, filter chamber and outlet channel. HBV (Hepatitius B virus) monoclonal antibody (Ag1) labeled with biotin were immobilized onto streptavidin coated beads of 30∼50 $\mu$m size. Fluorescein isothiocyanate (FITC)-labeled HBV monoclonal antibody (Ag8) was used to detect HBsAg (Hebatitis B virus surface Antigen), and fluorescence intensity was monitored by epi-fluorescence microscope. In this study, the immune response of less than 30 min was obtained with with the use of 100 $m\ell$ of sample.