• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.237-248
• /
• 2014

Linear cutting test is known to be very effective to determine machine parameters (i.e. thrust force and torque) and to estimate penetration rate of TBM and other operation conditions. Although the linear cutting test has significant advantages, the test is expensive and time-consuming because it requires large size specimen and high load capacity of the testing machine. Therefore, a few empirical prediction models (e.g. CSM, NTNU and QTBM) alternatively adopt laboratory index tests to estimate design parameters of TBM. This study discusses the estimation method of TBM machine parameters and disc cutter consumption using punch penetration test and Cerchar abrasion test of which the researches are rare. The cutter forces and cutter consumption can be estimated by the empirical models derived from the relationship between laboratory test result with field data and linear cutting test data. In addition, the estimation process was programmed through which the design parameters of TBM (e.g. thrust, torque, penetration rate, and cutter consumption) are automatically estimated using laboratory test results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.194-194
• /
• 1999

다이아몬드 박막은 결정립에 의해 심한 표면 거칠기를 나타낸다. 루비를 상대재료로 사용하여 하중 50g, 50rpm의 회전속도로 마모시험을 하였으며 마모 track의 직경은 100mm였다. 마찰계수는 0.5에서 계속 감소하며 0.1이하에서 안정한 상태를 유지하게 된다. 이 다이아몬드 박막위에 저마찰재료로 알려진 PTFE를 타겟으로 RF로 증착한 후 같은 조건으로 마모시험을 행하면 마찰계수가 초기부터 일정하게 유지할 수 있게 된다. 반면에 MoS2박막이 증착된 경우에는 완만한 마찰계수의 감소가 나타난다. 이러한 변화의 원인으로는 DLC 박막에서 보고되고 있는 바와 같이 다이아몬드의 sp3 결합구조가 마모시험중 흑연화하여 sp2 결합구조로 변하기 때문인 것인지 살펴보기 위하여 micro Raman을 통하여 마모 track을 분석하였고 AFM을 통하여 표면거칠기 변화와 표면 스크래치 발생 여부를 살펴보았다.

• Elastomers and Composites
• /
• v.49 no.2
• /
• pp.149-154
• /
• 2014

Friction and abrasion behaviors were investigated for SBR rubber compounds reinforced by silica and carbon black. Knife-blade abrader, newly designed based on tearing energy theory, was utilized in order to evaluate the effect of frictional work on the wear rate of the rubber compounds. It was found that the power law relation between frictional work and wear rate worked, in which as the wear rate was increased as frictional work increased. The wear rate could be determined successfully using the knife-blade abrader in which a moving distance of the knife blade in the process of wearing was measured continuously, instead of intermittent measurements of weight loss by wear during experiment.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.73-81
• /
• 2014

Friction and wear behaviors of natural rubber(NR) compounds were investigated using a blade-type abrader. The effects of temperature, normal load, and rotation speed on wear rate were studied, and wear behaviors of deteriorated compounds were also evaluated. As the rotation speed of specimen and the normal load to specimen increased, the wear rate increased. However, as the experimental temperature increased, the frictional coefficient decreased and the wear rate decreased accordingly. It was found from the wear studies that a power-law relation works between the frictional work input and the wear rate. It was observed that the wear rate dramatically increased by the degradation of the rubber specimen. The wear pattern was developed and the bigger ridge space of the pattern was observed usually in the higher normal load applied. In determining the wear rate of rubber compound, the continuous measurements of wear distance using the blade-type abrader could be successfully used instead of intermittent measurements of wear-loss weight.

• Composites Research
• /
• v.23 no.2
• /
• pp.10-16
• /
• 2010

$Al_2O_3$ fiber and SiC particle hybrid metal matrix composites (MMCs) were manufactured by squeeze casting method investigated for their tribological properties. The pin specimens had different ratios of fiber to particle content but their total weight fraction was constant at 20 wt. %. Tribological tests were performed with a pin-on-disk friction and wear tester. The investigation of the dry tribological characteristics of hybrid MMCs were carried out at room temperature and elevated temperature of$100^{\circ}C$ and$150^{\circ}C$. The morphologies of worn surfaces were examined by scanning electron microscope (SEM) to observe tribological characteristics and investigate wear behavior. The results revealed that the wear resistance improved with the content of SiCp increased of the planar random (PR) MMCs at room temperature. At the elevated temperature, it revealed that the wear resistance of normal (N) MMCs was superior to that of the PR-MMCs due to PR-fibers were easily pulled out holistically from the worn surface. Meanwhile, the coefficient of friction decreased with the temperature increasing.

• Clean Technology
• /
• v.15 no.1
• /
• pp.16-22
• /
• 2009

In this study, a fiber reinforced plastic (FRP) pipe with superior wear resistance was developed to replace the fly ash pipe of cast iron. Wear test was performed with various combinations of SiC filler and resin materials of unsaturated polyester, vinylester, epoxy, and phenol. Test results of ASTM D4060 showed the optimal combinations of resin, filler size, and resin/filler ratios. Test results of comparison between FRP and cast iron showed the possibility to replace cast iron pipe with the FRP pipe. Field test executed to compare the wear resistance between cast iron pipe and developed FRP pipe showed the superiority of the FRP pipe.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.139-145
• /
• 2004

용접산업이 발전함에 따라 가스메탈아크 용접에서 고내마모성의 콘택트 팁이 요구되어지고 있다. 현재 국내외에서는 콘택트팁에 대한 수명평가 기준이 없으며, 일부 업계에서 자체 규격을 제정하여 운용하고 있지만 근거가 명확하지 않다. 따라서 본 연구에서는 콘택트팁의 신뢰성 평가기준을 제정하고자 하였다. 팁의 주요 파손기구로는 고온 마찰마모, 전기적 에로존, 번백 등이 있다. 신뢰성 평가는 경도 시험, 열처리 후 경도, 용접 마모, 전기전도도를 시험으로 구성되었다. 팁의 수명은 마모가 45%에 도달했을 경우 송급된 와이어 총 길이로 하였으며, 4시간까지 마모시험 한 결과를 근거로하여 한계수명을 추정하였다. 본 연구에서는 세 가지 조성의 다섯 가지의 콘택트팁에 대하여 4시간동안 내마모성 실험을 하였으며, 마모정도는 1시간 단위로 면적비를 백분율로 환산하여 측정하였다. 실험 결과 가공경화형팁은 1시간이내에 재결정 및 입자성장에 의한 경도 저하로 가공경화가 팁 수명에 지속적 영향을 주지 못하였다. 반면, 석출경화형팁은 석출경화 효과가 지속되어 가공경화형팁보다 수명이 향상 되었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.303-304
• /
• 2003

토목합성재료 중 부직포 및 직포 지오텍스타일이 지반구조물에 적응될 경우 구속하중 부가 시 흙과의 마찰로 인한 마모에 의해 지오텍스타일의 표면손상이 발생하게 되면 강도저하가 발생하여 구조물의 안정성에 중요한 영향을 미치게 된다. 일반적으로 지오텍스타일과 흙과의 마찰특성평가는 직접전단시험이나 인발시험에 의해 평가되지만, 이들 시험 모두 구속하중에 의한 전단 및 인발변형을 해석할 뿐이며, 마모에 의한 지오텍스타일 표면 손상이나 변화는 거의 고려되지 않는 실정이다. (중략)

• Composites Research
• /
• v.16 no.3
• /
• pp.75-84
• /
• 2003

The purpose of this study is to investigate the wear properties of Saffil/Al, Saffil/A12O3/Al and Saffil/SiC/Al hybrid metal matrix composites fabricated by squeeze casting method. Wear tests were done on a pin-on-disk friction and wear tester under both dry and lubricated conditions. The wear properties of the three composites were evaluated in many respects. The effects of Saffil fibers, $\textrm{Al}_2\textrm{O}_3$ particles and SiC particles on the wear behavior of the composites were investigated. Wear mechanisms were analyzed by observing the worn surfaces of the composites. The variation of coefficient of friction(COF) during the wear process was recorded by using a computer. Under dry sliding condition, Saffil/SiC/Al showed the best wear resistance under high temperature and high load, while the wear resistances of Saffil/Al and Saffi1/$\textrm{Al}_2\textrm{O}_3$/Al were very similar. Under dry sliding condition, the dominant wear mechanism was abrasive wear under mild load and room temperature, and the dominant wear mechanism changed to adhesive wear as load or temperature increased. Molten wear occurred at high temperature. Compared with the dry sliding condition, all three composites showed excellent wear resistance when lubricated by liquid paraffin. Under lubricated condition, Saffil/Al showed the best wear resistance among them, and its COF value was the smallest. The dominant wear mechanism of the composites under lubricated condition was microploughing, but microcracking also occurred to them to different extents.

• Tribology and Lubricants
• /
• v.3 no.2
• /
• pp.50-55
• /
• 1987

윤활제가 없는 경우와 고체 윤활제를 사용하였을 경우 세라믹 SiC의 마찰 마모시험을 상온 및 고온에서 실시하였다. 이때 사용한 마모시험기는 Two-disk형이고, 마찰속도는 132mm/sec이며, 하중의 2.6N에서 10.4N의 범위이다. 실험결과에 의하면 고체윤활제(흑연. Mos$_2$)는 세라믹의 마찰마모를 300$\circ$C 이하에서 모두 효과적으로 감소시킬 수 있었다. 또 300$\circ$C 이하에서는 Mox$_2$가 더 효과적인 윤활제 역할을 하고 300$\circ$C 이상에서는 흑연이 더 효과적이었다. 그원인은 윤활제 피막형성 및 파괴가 윤활 효과에 지배적인 영향을 미치고 온도상승에 따라 각 윤활제의 특성이 달라지기 때문이었음이 SEM 이나 EDS에 의해 밝혀졌다. 따라서 고온에서 윤활효과를 증대시키기 위해서는 윤활피막의 접착을 강하게 해줄 수 있는 접착 첨가물이 필요하다. 고온에서 윤활이 안된 경우 마모는 결정경계를 통한 입자들의 파괴가 주로 원이되나 낮은 온도나 윤활상태에서는 결정경계에 무관한 연마 마모가 마모를 지배하고 있었다.