1 |
ASTM, (2010), "Standard test method for laboratory determination of abrasiveness of rock using the Cerchar method (D-7625-10)"
|
2 |
Bruland, A. (1998), "Hard rock tunnel boring", Ph.D. Dissertation, Norwegian University of Science and Technology.
|
3 |
Chang, S.H., Choi, S.W., Lee, G.P., Bae, G.J. (2011a), "Statistical analysis of NTNU test results to predict rock TBM performance", Journal of Korean Tunneling Underground Space Association, Vol. 13, No. 3, pp. 243-260.
과학기술학회마을
|
4 |
Dollinger, G.L., Handewith, H.J., Breeds, C.D. (1998), "Use of the punch test for estimation TBM performance", Tunneling and Underground Space Technology. Vol. 13, No. 4, pp. 403-408.
DOI
|
5 |
Chang, S.H., Choi, S.W., Lee, G.P., Bae, G.J. (2011b), "Rock TBM design model derived from the multi-variate regression analysis of TBM driving data", Journal of Korean Tunneling Underground Space Association, Vol. 13, No. 6, pp. 531-555.
과학기술학회마을
|
6 |
Chang, S.H., Choi, S.W., Bae, G.J., Jeon, S. (2006), "Performance prediction of TBM disc cutting on granitic rock by the linear cutting test", Tunneling and Underground Space Technology, Vol. 21, pp. 271.
DOI
ScienceOn
|
7 |
Cho, J.W., Jeon, S., Yu, S.H., Chang, S.H. (2010), "Optimum spacing of TBM disc cutters: A numerical simulation using three-dimensional dynamic fracturing method", Tunneling and Underground Space Technology, Vol. 25, No. 3, pp. 230-244.
DOI
ScienceOn
|
8 |
Gehring, K. (1995), "Prognosis of advance rates and wear for underground mechanized excavations", (in German), Felsbau Vol. 13, No. 6, 439-448.
|
9 |
Gertsch, R., Gertsch, L., Rostami, J. (2007), "Disc cutting tests in Colorado red granite: Implications for TBM performance prediction", International Journal of Rock Mechanics and Mining Sciences. Vol. 44, No. 2, pp. 238-246.
DOI
ScienceOn
|
10 |
Jeong, H.Y., Jeon, S., Cho, J.W. (2013), "A numerical study on rock cutting by a TBM disc cutter using SPH code", Journal of Korean Tunneling Underground Space Association, Vol. 15, No. 3, pp. 345-356.
과학기술학회마을
DOI
|
11 |
Jeong, H.Y., Jeon, S., Cho, J.W., Rostami, J. (2014), Performance assessment of hard rock TBM and rock boreability using punch penetration test, Rock Mechanics and Rock Engineering (Under review).
|
12 |
KTA (2008), "Mechanized tunneling", pp. 262.
|
13 |
Lee, S.D., Jeong, H.Y, Jeon, S. (2012), "Determination of rock abrasiveness using Cerchar abrasiveness test", Tunnel and Underground Space, Vol. 22, No. 4, pp. 284-295.
과학기술학회마을
DOI
|
14 |
Jeong, H.Y., Jeon, S.W., Cho, J.W. (2011), "Assessment of cutting performance of a TBM disc cutter for anisotropic rock by linear cutting test", Tunnel and Underground Space, Vol. 21, No. 6, pp. 508-517.
과학기술학회마을
|
15 |
Rostami, J. (2008), "Hard rock TBM cutterhead modeling for design and performance prediction", Geomechanik und Tunnelbau, No. 1, pp. 18-28.
|
16 |
Roby, J., Sandell T., Kocab, J., Lindbergh, L. (2008), "The current state of disc cutter design and development directions", Proceedings of 2008 North American Tunnelling Conference (NAT2008), Society for Mining, Metallurgy & Exploration, pp. 36-45.
|
17 |
Rostami, J., Ozdemir, L. (1993), "A new model for performance prediction of hard rock TBMs", Proceedings, Rapid Excavation and Tunneling Conference (RETC), pp. 793-809.
|
18 |
Rostami, J., Ozdemir, L., Nilsen, B. (1996), "Comparison between CSM and NTH hard rock TBM performance prediction models", Proceedings, Annual Technical Meeting of the Institute of Shaft Drilling and Technology (ISDT), pp. 1-11.
|