• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.397-397
• /
• 2012

본 연구는 LED의 광추출 효율을 높이기 위해 다양한 모양의 다각형을 이용해 광추출 효율 및 전류주입 효과를 연구하였다. 우리는 기존의 사각형 LED와 삼각형, 마름모, 오각형, 육각형, 원형의 모양을 최대한 같은 면적을 같게 하여 각 모양에 따른 광추출 효율이 어떻게 변하는지 연구하였고 또한, 각각의 모양에 대하여 전극 모양을 다르게 하여 각 모양의 전극 구조를 시뮬레이션과 실험을 통하여 원인 규명 및 최적의 구조를 도출하였다. 각 모양에 대한 광추출 효율은 lighttools와 Ratro 시뮬레이터를 이용하였고 전극 모양은 SpeCLED를 통하여 실험값과 비교하였다. 각 모양의 사이즈는 사각형 $500{\times}1,000{\mu}m$의 면적으로 최대한 동일하게 제작하여, 수평형 칩을 제작후 패키지 하여 적분구 측정 및 고니오미터 측정을 통해 총 광량 및 지향각에 따른 광추출 효율을 비교 하였다. 또한 전극모양에 따라 변화하는 I-V 특성분석 및 다양한 전기적 분석을 통하여 최적의 다각형 구조를 도출하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.249-250
• /
• 2006

Bi-2212/Ag ROSAT용 와이어의 제작은 PIT법으로 제작된 단일 필라멘트가 사용되었다. 제작된 필라멘트를 압연하여 너비 8.6mm, 두께 2.15mm의 압연 테입을 제조한 후 4개씩 적층하여 3 부분의 마름모로 만들어 다시 내경 17.2mm의 Ag튜브에 적층하여 ROSAT 와이어를 약 150 mm로 제작하였다. 제작된 ROSAT 와이어는 산소분위기에서 약 60시간 동안 열처리 되었다. 이때 열처리 온도와 최고점에서의 유지시간에 따른 Bi-2212/Ag ROSAT 와이어의 전기적 특성을 평가 하였다. 기존의 Bi-2212/Ag 와이어에 비해 압연, 적층, 인발하여 제작된 동일한 크기의 ROSAT 와이어가 향상된 전기적 특성을 나타내었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.159-163
• /
• 2011

천수방정식에 대한 Lax-Wendroff 기법을 기반으로 한 유한요소 모형을 낙동강 상류부 단호교 지역에 적용하였다. 모형의 검증을 위하여 이동경계에 대한 Thacker (1981)의 정확해와 젖음-마름 기법(wet-dry scheme)을 이용한 본 모형의 수치해를 비교하여 대체로 잘 일치함을 알게 되었다. 또한, U자형 만곡부를 포함한 수로의 흐름에 적용하여, 기존의 수리실험 결과, 수치모의 결과와 비교하고, 모형의 적용 가능성을 확인하였다. 낙동강 상류지역에 위치한 단호교지역에 본 모형을 적용하고, 이를 기존 유한차분법에 의한 수치해와 비교하였다.

• Research in Plant Disease
• /
• v.18 no.1
• /
• pp.24-28
• /
• 2012

The rice diseases occurring on the transgenic rice plant carrying protox gene (CPPO06) was assessed and compared with other varieties of rice such as Dongjin, Chucheong, Ilpeum, and Onnuri in the fields located in Cheongwon of Chungbuk, Suwon of Gyeunggi, and Gwangju of Chonnam. In the field of Cheongwon, the diseases such as blast, leaf spot, sheath blight and Fusarium blight were observed. False smut were observed only in the field of Suwon, where the ratio of diseased plants was 0.28% in CPPO06 and 0.37% in Onnuri, respectively. In the field of Gwangju, leaf spot caused by Cochlioborus miyabeanus was the most severely occurring disease among rice diseases mentioned above. Fusarium blight occurred in all the 3 fields, which were more severe in CPPO06 plants treated with or without oxadiazon as the herbicide. Except for Fusarium blight, there was no significant difference in the rice diseases as blast, leaf spot, sheath blight and false smut between CPPO06 and other rice varieties.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.224-231
• /
• 2010

Xanthomonas oryzae pv. oryzae, causal agent of bacterial leaf blight (BLB) of rice, had been collected and identified using Biolog and fatty acid analysis. Epidemics of BLB had been occurred all the times at several rice cultivating areas in Korea in 1999-2004. Most X. oryzae pv. oryzae isolated in 1999 and 2002 belonged to Korean race K1, but more than 50% of the pathogen isolated in 2003 belonged to Korean race K3. Especially, most pathogens isolated in Jeonnam and Joenbuk provinces belonged to Korean race K3. Inoculation test of near isogenic lines (NIL) of rice carrying single resistance genes against BLB showed that many isolates belonging to Korean race 1 reacted differently to diverse resistant monogenic lines of rice. Southern blot analysis also showed that the bacterial pathogens belonged to the same race had different numbers of avirulence genes. This results suggested that each Korean race type may respond to many resistance genes of rice. All the K3 races isolated in Jeonnam and Joenbuk provinces were able to cause disease on Xa3 monogenic lines of rice. Since most rice cultivars cultivated in Jeonnam and Jeonbuk were carrying Xa3 resistance genes, the bacterial pathogens isolated in Jeonnam and Jeonbuk were likely to develop to adapt to Xa3 resistance gene. Together with avirulence gene patterns of the bacterial isolates and the results of disease reaction of monogenic lines of rice to them, Korean X. oryzae pv. oryzae was classified into 19 pathotypes. This newly classified pathotypes should help the breeding of new resistance rice cultivars in Korea.

• Korean Journal Plant Pathology
• /
• v.13 no.3
• /
• pp.191-193
• /
• 1997

A new disease of arrowhead (Sagittaria trifolia L.)caused by Plectosporium tabacinum was observed at Yusung area in Korea. Infection occurred on the petioles, leaves, and seeds of young and old arrowhead plants. Small and brown spots developed on the infected areas initially, which later coalesced to form large dead areas resulting in the complete blight of the host plant. Inoculation of arrowhead seedlings by conidial suspension induced typical disease symptoms found in naturally infected plants. The new name for the disease 'arrowhead blight' is suggested. The pathogenic fungus was identified as Plectosporium tabacinum and its morphological and cultural characteristics are described.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.45-58
• /
• 1997

In this paper the factors developing ground disturbance with the penetration of PDB mandrels are analysed by using field reconnaissance and laboratory test. In the laboratory tests, the amount of smear zones around the PDB mandrels is compared with respect to the shape and the size of mandrels by penetrating model mandrels of various shapes into the reconstituted clay. The shapes of mandrels selected are circular, oval and rectangular. It was recognized from the field reconnaissance that the size and shape, driving techniques of mandrels, as well as the size and shape of anchor shoe could develop ground disturbance. The mandrels that would reduce the smear effect of clay is oval and rectangular shapes rat her than circular one. It was found that the smear effect becomes smaller as the ratio of the long and short edge of the rectangular shape mandrel becomes larger.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.76-86
• /
• 2003

We define a string stability heuristically and divide the board into group territory in computer Go. Elements of string stability are eye(E), eye-like(EL), special-eye(SE), extension-point(EX), liberty(L) and connection-point(CP). A string stability have 5 levels that are complete alive, alive, unsettled, danger and killed level. A group is made strings and link-points and have the territory. Territory division of a group is acquired by strings stability and link-points which are marym-mo, hankan, nalil-ja, and twokan between string and string. We compare our method with the result of evaluation of professional player. As a result, the mean error is 8.7.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.33-40
• /
• 2000

In this study, a shape decomposition method using morphological operations is studied for decomposing the complex shape in 2-D image into its simple primitive elements. The serious drawback of conventional shape representation algorithm is that primitive elements are extracted too much to represent and to describe the shape. To solve these problems, a new shape decomposition algorithm using primitive elements that are similar to the geometrical characteristics of shape and 4 scan modes is proposed in this study. The multiple primitive elements as circle, square, and rhombus are extracted by using multiscan modes in a new algorithm. This algorithm have the characteristics that description error and number of primitive elements is reduced. Then, description efficiency is improved. The procedures is also simple and the processing time is reduced.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.67-75
• /
• 1999

In this paper, a shape decomposition method using morphological operations is studied for decomposing the complex shape in 2-D image into its simple primitive elements. The serious drawback of conventional shape representation algorithm is that primitive elements are extracted too much to represent and to describe the shape. To solve these problems, a new shape decomposition algorithm using primitive elements tat are similar to the geometrical characteristics of shape and 4 scan modes is proposed in this study. The multiple primitive elements as circle, square, and rhombus are extracted by using multiscan modes in a new algorithm. This algorithm have chatacteristics that description error and number of primitive elements is reduced. Then, description efficiency is improved. The procedures is also simple and the processing time is reduced.