• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.286-293
• /
• 1998

This study was carried out to find the effects of seed tuber position and number of nodes on growth of Saururus chinensis Baill. at experimental field of Chungbuk Provincial Rural Development Administration from 1996 to 1997. Seed tubers were divided into upper, middle and lower parts, and they were prepared to 1-, 2-, 3-node cuttings in each. Percentage of sprouting in planting of middle part was highest of 92%, and the percent increased by increasing the number of nodes. Growth of shoot and root tuber was the most favorable with planting of 3-node cuttings of middle part, and leaf area index (LAI) was highest of 3.10 in the same treatment. Dry matter weight and percentage of root tuber were highest of $821g/m^2$ and 28 % with planting of 3-node cuttings of middle part. Yield of dry leaf and root tuber were highest of 272kg/10a and 821kg/10a with planting of 3-node cuttings of middle part.

• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.119-129
• /
• 2006

The antennal receptors of the adult male and female of the American leafminer, Liriomyza trifolii (Diptera: Agromyzidae) was studied using the scanning electron microscopy. This antennal receptors were developed to accept the chemical or mechanical signal in the environment. The antennae of L. trifolii is 317.52 $\mu$m long and composed of the scape, pedicel, funicle, arista. Antennae located between compounds eye on the middle in the head. The result of SEM observation, four types of receptors were characterized and grouped into morphological classes: Trichoid, Basiconic, Coeloconic, Chetiform sensilla. Trichoid sensilla are located on the all segment. As a rule, female is more than male. This sensilla are long and slender hair with straight or slightly curved, and taper to a sharp point apically. Basiconic sensilla are observed only on the funicle. The number of basiconic sensilla in male and female are almost same in both sexes. This sensilla are long and thick hair with stright or slightly curved, and taper to a blunt point apically. Coeloconic sensilla are observed only on the funicle. This sensilla were showed a finger-like projections the peg apex. The number of basiconic sensilla in male and female are almost same in both sexes. Chetifarm sensilla are located on the all segment. This sensilla are needle-like, tapering sharply. Pedicel are more than scape. The number of Chetiform sensilla in male and female are almost same in both sexes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.39-46
• /
• 2015

The paper studied possibility of improvement of efficient of data processing in the line coder when Hangul syllables in Unicode system is used for the source code. The scrambling in the line coder is to solve the problem happened due to the source code. The study is based on the HDB-3 scrambling method in ITU-T standards that is applied to AMI line coder. The referred data of Hangul syllables and its use frequency which are required to analysis was used the data extracted from the source data of the National Korean Language Institute. According to the analysis, the average 24% scrambling was generated in source code of Hangul syllables in Unicode system. When the referred Hangul syllables was applied to Unicode system, the average 27% scrambling was producted. Total 8,924ea Hangul syllables in 11,172ea Hangul syllables in Unicode system were not scrambled. Therefore the referred Hangul syllables 1,540ea were accepted in the unscrambled code areas. As a result, the existing Unicode Hangul syllable codes can't prevent the scrambling, but it is possible to completely remove the 27% scrambling with new source coding system. And then, it can be improved the data processing efficient upto minimum 27% in line coder by software in presentation layer instead of physical layer.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.193-198
• /
• 2012

To enhance the proliferation efficiency of Menyanthes trifoliata L. endangered species in Korea, various rhizome cuttings were tested based on cutting length and node numbers. Growth length and increased volume of rhizomes were highest on long cuttings of 10-18cm length. But relative growth length of rhizomes were higher in short cuttings of 2-4cm and medium cutting of 4-10cm length than in long cuttings. Relative increased volume of rhizomes was highest in medium cuttings. The node numbers were not contributed to the efficiency of relative growth of rhizomes. This study suggests that medium length cutting is the best practice for the proliferation of M. trifoliata.

• Korean journal of applied entomology
• /
• v.52 no.2
• /
• pp.71-74
• /
• 2013

The moving period and overwinteing site of Scrobipalpa salinella (Zeller) were investigated in Gimje, Jeonbuk, and Shinan, Jeonnam in the glasswort field. Densities of Scrobipalpa salinella larvae were started to increase from mid-September in halophytes, such as Suaeda asparagoides, S. japonica, and S. maritima, rather than glasswort. S. salinella was overwintering inside the halophytes in old larva. Density ratio of overwintering S. salinella in Suaeda asparagoides, S. japonica, and S. maritima were 20.5, 28.4 and 51.1%, respectively. Overwintering population was highest in S. maritima among halophytes. The occurrence of first adult in the next spring was from April 19 to April 20 in Gimje, Jeonbuk, and Shinan, Jeonnam.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.198-201
• /
• 2015

The prompt and accurate location determination of the nodes of the wireless indoor shipboard networks is crucial to forming the stable wireless shipboard sensor networks. To this end in this paper it can be achieved through the measurement of the bi-directional channel qualities among the nodes after the locations of the sensor nodes temporarily placed. For the 1st stage the piconet-type sensor networks are considered to measure the channel qualities between a specific node and the cluster node which is the master node. After finishing the 1st stage measurement the nodes needing the relay nodes are selected and the measurement action goes into the 2nd stage. In the 2nd stage the measurement between a candidate relay node and the node needing a relay node starts to begin. After the 2nd stage the relay nodes to connect to the cluster node are fixed and the information delivery paths between a node and the cluster head are established. In this paper the measurement results in the realistic environment are gathered and analysed to show that the measurement procedure can be applied in the wireless indoor shipboard networks.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.17-24
• /
• 2003

One of the reasons for brittle failure in reinforced concrete structures subjected to severe earthquake is due to large local bond-slippage of bars resulting in fast bond degradation between reinforcing bars and concrete. This study aims to evaluate effects of bar deformation height on bond performance, specially, bond degradation under cyclic loading. Bond test specimens were constructed with machined bars with high relative rib areas. The degree of confinement by transverse bars is also another key parameters in this bond test. From test results, amounts of energy dissipation are calculated and compared for each parameter. Test results show that bond strength and stiffness drops significantly as cycles increases. The confinement and high relative rib area are effective to delay bond degradation, as the reduction of bond strength of cyclic loading compared to monotonic loading decreased for bars with large confinement and high relative rib areas. The energy dissipation also increases as the degree of confinement and relative rib area increases. However, tested bars with very high rib areas show that the bond may be damaged at relatively small slip because of high stiffness. The study will help to understand the bond degradation mechanism due to bar deformation height under cyclic loading and be useful to develop new deformed bars with high relative rib areas.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.375-384
• /
• 2005

The effects of bar deformation properties on bond of steel reinforcing bars to concrete are experimentally studied to predict the bond strength. Based on the previous research about high relative rib area, bond strength between reinforcing bars and concrete can be improved by the control of rib height and spacing. But, the equations in Korean code provisions to estimate development and splice length do not include these specifications of reinforcing bars. So the purpose of this paper is to determine the effect of relative rib area to the bond strength. This paper describes 2 kinds of experimental researches. Thirty beam-end specimens were tested to investigate the effects of bar size and relative rib areas ranging from 0.112 to 0.162. And, twelve lap-splice beam specimens were tested to the same variables. Each test results are normalized and compared with the proposed equations of ACI 408 committee. The results show that bond strength is increased as bar size and the relative rib area(Rr) increase. The distribution of flexural cracks and failure aspect do not appear to be affected by $R_r$.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.577-588
• /
• 2006

이 논문에서는 호의 가중치가 음수가 될 수 있는 무향 그래프에서 마디집합들을 선택했을 때, 각 마디집합 사이에 걸쳐 있는 호의 가중치 합을 최대화하는 최대 가중치 합 그래프마디 분리 문제에 대해 연구한다. 우선$P\;{\neq}\;NP$ 라는 가정 하에서, 이 문제는 NP - hard이며 어떠한 근사 계수를 가지는 근사해법도 존재하지 않는다는 것을 밝힌다. 또한 이 문제를 정수 계획으로 풀기 위해, 그래프의 절단면을 나타내는 벡터들이 만드는 다면체의 극대면(facet)을 정의하는 부등식들을 추가 제약식으로 사용하는 branch-and-cut 알고리듬을 제시하고 구현하였다.

• The Korean Publising Journal, Monthly
• /
• s.98
• /
• pp.8-9
• /
• 1992

예비중학생의 시절은 독서의 한 매듭을 맺는 계절이다. 이 매듭은 대나무의 마디와 같다. 마디는 또다른 자람의 디디미돌이 되고 더 큰 자람으로 이어진다. 중학교 지니학을 앞둔 어린이들에게 독서의 도약을 이룰 수 있도록, 감명 깊었던 책 다시 읽기, 못 읽은 필독도서 마저 읽기, 어려운 책 한번 읽어보기를 권하고 싶다.