• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.733-735
• /
• 1999

전압원을 포함한 대형회로망의 컴퓨터적 해법을 위한 도형적 접근 방법을 제시하였다. 기본적인 회로망 해석법으로 마디해석법을 사용하였고, 전압원은 등가변환이 어려운 직렬 임피던스가 없는 경우로 한정하였다. 방향성 그래프의 기하학적 작도와 전압원이 연결된 마디와 마디 사이의 상관 관계식에 의해 회로망 행렬을 구성하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.35-36
• /
• 2010

This research investigated the bond characteristic by lap splice experimental which has change relative area on rib variation of reinforcing bar. As a result has similar load-deflection curve with existing experiment, Maximum yield strength and displacement is increase.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3175-3177
• /
• 2000

전압원과 전류원 및 RLC 수동소자들로 구성된 대형회로망에서 망(網)과 마디를 복합시킨 새로운 회로망 해석법을 제시하였다. 종래의 수식적 유도 과정이 불필요하며 도식적 추출에 의해 대형회로망을 간단히 해석한다 각 전원은 직렬 또는 병렬 임피던스를 반드시 수반하고 있지 않아도 무방하다. 망 설정과 마디 선정 과정에서의 전원 처리에 의해 회로망의 도형화 시켰고, 그로부터 행렬 형태의 부분 식을 도출하였다. 망해석법에 의한 방식과 마디해석법에 의한 기법이 가지전류방향 행렬에 의해 합성된다. 합성된 최종 식은 컴퓨터 몫이다.

• Applied Microscopy
• /
• v.37 no.4
• /
• pp.231-238
• /
• 2007

Although the biological significance of the antennal sensillae to millipedes are widely understood, the structure and function of the antennal sensillae are still not clear and more precise analysis is required. Thus, this study initiate to reveal the fine structural characteristics of various sensory receptors on the antennae of millipede Oxidus gracilis were observed with field emission scanning electron microscopy(FESEM). The antennae generally include eight segments, called articles. On the surface of the antennae, there are a variety of sensory receptors which include olfactory and mechanical receptors. We could identify four different types of antennal sensillae in O. gracilis as follows: apical cone sensilla, trichoid sensilla, chatiform sensilla and basiconic sensilla. The most prominent is four large spital cone sensillae on distal tip of the 8th article. Both of trichoid and chaetiform sensillae are abundantly observed at the most of antennal articles. These sharply pointed structures are inclined and slightly curved toward the apex of the sensilla. The basiconic sensilla are further divided into three subtypes: large basiconic sensilla($Bs_1$), small basiconic sensilla($Bs_2$) and spiniform sensilla($Bs_3$). The $Bs_1$ is located at the 5th and 6th articles, while the $Bs_2\;and\;Bs_3 can be seen at the 5th and 7th articles, respectively.

• Korean journal of applied entomology
• /
• v.52 no.2
• /
• pp.71-74
• /
• 2013

The moving period and overwinteing site of Scrobipalpa salinella (Zeller) were investigated in Gimje, Jeonbuk, and Shinan, Jeonnam in the glasswort field. Densities of Scrobipalpa salinella larvae were started to increase from mid-September in halophytes, such as Suaeda asparagoides, S. japonica, and S. maritima, rather than glasswort. S. salinella was overwintering inside the halophytes in old larva. Density ratio of overwintering S. salinella in Suaeda asparagoides, S. japonica, and S. maritima were 20.5, 28.4 and 51.1%, respectively. Overwintering population was highest in S. maritima among halophytes. The occurrence of first adult in the next spring was from April 19 to April 20 in Gimje, Jeonbuk, and Shinan, Jeonnam.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.975-977
• /
• 2014

본 논문에서는 판소리 자동채보에 중요한 요소인 '합'과 '궁'의 위치 즉 마디를 인공신경망과 히스토그램을 이용하여 추정한다. 기존의 합과 궁을 추정하는 방법으로는 NCC(Normalized Cross Correlation)를 이용한 대표치 추정 윈도우와 칼만 필터를 이용하였다. 하지만 대표치 추정 윈도우를 구성하는 과정에서 단순히 15개의 특징벡터 각각의 평균을 이용하기 때문에 분별력이 떨어지고, 마디위치를 보정하는 과정에서 칼만 필터를 사용하면 전체음원이 길이가 짧을 경우 오차가 발생할 가능성이 크다. 본 논문에서 제안한 마디 추정 알고리즘은 장단별로 최대 90%이상의 정확도로 마디를 추정할 수 있다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.768-772
• /
• 2005

TSP(Traveling Salesman Problem) has been a nagging NP-complete problem to test almost every algorithmic idea in combinatorial optimization in vain. The main bottleneck is how to get the integer results {0,1} and to avoid sub-tours. We suggest simple and practical method in two steps. Firstly for every node, an initial Hamiltonian cycle us produced on the nearest neighbour concept. The node with nearest distance is to be inserted to form a increased feasible cycle. Secondly we improve the initial solution by exchanging 2 cuts of the grand tours. We got practical results within 1 from the optimum in 30 minutes for up to 200 nodes problems. TSP of real world type might be tackled practically in our formulation.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.483-487
• /
• 2001

This study was carried out to investigate the role of attached leaflet on rooting and growth by one nodal cutting in tomato. As cutting sources 4 to 6 nodes could be obtained from one nursery seedling. Medium for cutting was a mixture with perlite plus peat moss (1 : 1, v/v), and each plug capacity was 30mL in the 72 cells-plug tray. Plant height and the number of leaves were significantly increased by attached leaflet cutting in 'Pepe' and 'Coco' cherry tomato. Dry weights of top and root were increased as much as 3 to 15 times in the cutting attached leaflet. Rooting percentage was 93.5% in one node cutting and 86% in the cutting with hypocotyl node part. At 20 to 24 days after nodal cutting, healthy nursery plant could be produced to transplant in field. The nursery plants by nodal cutting (NPNC) showed more fibrous roots and less tap roots than that of seedling. In terms of rooting pattern, NPNC rooted at the whole ground stem part, while rooting of seedling occurred at basal part of hypocotyl.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.39-46
• /
• 2015

The paper studied possibility of improvement of efficient of data processing in the line coder when Hangul syllables in Unicode system is used for the source code. The scrambling in the line coder is to solve the problem happened due to the source code. The study is based on the HDB-3 scrambling method in ITU-T standards that is applied to AMI line coder. The referred data of Hangul syllables and its use frequency which are required to analysis was used the data extracted from the source data of the National Korean Language Institute. According to the analysis, the average 24% scrambling was generated in source code of Hangul syllables in Unicode system. When the referred Hangul syllables was applied to Unicode system, the average 27% scrambling was producted. Total 8,924ea Hangul syllables in 11,172ea Hangul syllables in Unicode system were not scrambled. Therefore the referred Hangul syllables 1,540ea were accepted in the unscrambled code areas. As a result, the existing Unicode Hangul syllable codes can't prevent the scrambling, but it is possible to completely remove the 27% scrambling with new source coding system. And then, it can be improved the data processing efficient upto minimum 27% in line coder by software in presentation layer instead of physical layer.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.63-68
• /
• 2008

Single-node stem pieces ca. 1 cm in length containing a axillary bud were obtained from in vitro plants of potato (Solanum tuberosum L.). The influences by a position of the node and the existence of a leaf at the node were observed in the single-node culture on the 8% sucrose MS medium. The effect of CCC was also investigated for the microtuberization. The apical part node was excellent in the tuberization not to mention shoot length, fresh weight, diameter, the number of node on the in vitro culture of a single-node than the lower part. The differences in the diameter of a tuber formed in the part of the axillary bud on all treatments including the cultivation of the apical part node were not recognized. However, the fresh weight of the tuber showed high value in the tuber formed at the axillary bud of shoot apex part. At 20 days after cultivation, tuberization was promoted in the new stolen that developed from the bud of node with a leaf under SD condition of 8 hours at $20^{\circ}C$. The tuberization from axillary bud of the single-node without leaf was inhibited at high temperature of $28^{\circ}C$ regardless of daylength. Whereas, tuberization at $20^{\circ}C$ and $28^{\circ}C$ was similar without the difference under SD condition but the tuber formation ratio were low. CCC 500 mg/L promoted tuberization and the effect was also showed even under LD condition at $28^{\circ}C$. The inhibiton of tuberization under LD and high temperature condition could be solved by treatment with CCC.