• Journal of the Korean Home Economics Association
• /
• v.31 no.1
• /
• pp.211-223
• /
• 1993

바닥마감재료가 다른 여름철의 찬바닥이 인체피부온도 및 온열적 쾌적감에 미치는 영향을 검토하기 위하여, 주위벽 및 천장의 온도를 기온과 거의 같게 한 항온실을 이용해서 바닥에 앉은 자세, 의자에 앉은 자세, 서 있는 자세별로 검토했다. 그 결과를 요약하면 다음과 같다. (1) 평균피부온도는 기온이 낮고 수온이 낮을수록 낮았다. Carpet 마감재료는 서 있는 자세, 바닥에 앉은 자세의 평균피부온도가 낮고 의자에 앉은 자세가 높았다. Cork 마감재료가 Carpet, Flooring 마감재료에 비해 평균피부온도가 낮았다. (2) 온냉감평가는 흑구온도가 낮게 되면$\ulcorner$중성이다$\lrcorner$혹은$\ulcorner$서늘하다$\lrcorner$쪽으로 평가하고, Cork, Carpet, Flooring 마감재료의 순으로 $\ulcorner$서늘하다$\lrcorner$쪽으로 평가 하였다. (3) 쾌적감평가는 바닥에 앉은 자세와 서 있는 자세가 의자에 앉은 자세보다 쾌적한 것으로 평가하였다. 마감재료는 Cork, Flooring, Carpet 순으로 쾌적하다고 평가 하였다. (4) 바닥마감재료에 대한 평가는 바닥에 앉은 자세의 경우, Carpet 마감재료는$\ulcorner$차가운$\lrcorner$$\ulcorner$습기찬$\lrcorner$의 평가점수가 높고, Cork 마감재료는$\ulcorner$평활한$\lrcorner$$\ulcorner$차가운$\lrcorner$$\ulcorner$감촉이 좋은$\lrcorner$$\ulcorner$딱딱한$\lrcorner$의 평가점수가 높고, Flooring 마감재료는$\ulcorner$평활한$\lrcorner$$\ulcorner$탄력성이 없는$\lrcorner$$\ulcorner$딱딱한$\lrcorner$의 평가점수가 높았다.$\ulcorner$따듯한$\lrcorner$-$\ulcorner$차가운$\lrcorner$의 평가는 바닥온도의 영향을 받아서, Cork, Flooring 마감재료가 Carpet 마감재료보다$\ulcorner$차가운$\lrcorner$의 높은 점수평가를 하였다. (5) Carpet 마감재료는 평균피부온도가 34$^{\circ}C$를 넘어도$\ulcorner$약간 시원하다$\lrcorner$는 평가이고, 서 있는 자세와 의자에 앉은 자세가 바닥에 앉는 자세보다 쾌적하다고 평가한다. Cork 마감재료는 3자세 모두 평균피부온도 33~34$^{\circ}C$의 사이에서 가장 쾌적하다. Flooring 마감재료는 온열적중성, 쾌적감의 중성의 평가가 많다. 이상의결과를 종합하면, 찬바닥이 인체에 미치는 영향은 바닥마감재료로는 Cork, Flooring이 보다 좋은 평가를 하였음으로, 여름철 바닥마감재료로서는 Cork, Flooring 마감재료가 바람직하다고 생각된다. 자세별로는 서 있는 자세는 바닥에 앉은 자세와 거의 같은 경향을 보이고, 의자에 앉은 자세는 바닥에 앉은 자세와 서 있는 자세 만큼 영향을 받지 않았다. 이후 실험결과를 중심으로 찬바닥의 경우, 보다 쾌적한 온열환경범위를 제안하려고 한다.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.85-91
• /
• 2012

To reduce human life and property damage at the fire in a building, it is most critical to control flame spread in the early stage. Fire spread prevention measure generally includes fire resistance performance securing of structure member in the arson zone and use limitation based on combustion performance of finishing material. The latter is most fundamental fire safety design to determine flame spread, but domestic combustion test determines combustion performance by specimen sized fire test method. Thus, there are many restrictions in the determination of combustion performance by composite material such as sandwich panel. Especially, outer finishing material uses a variety of composite material such as dry bit, aluminum composite panel, and metal panel compared to inner finishing material. Therefore, this study would determine vertical fire spread features by a full scaled fire experiment through the test method of ISO 13785-2, an international test standard.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.84-91
• /
• 2008

"Eco-friendly construction" is an emerging issue in the building industry. Main purpose of the eco-friendly construction is to sustain the health and environment of building residents and to minimize the harmful effect on their environment. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Environmental performance is to meet through using the highest grade eco-friendly materials. However, generally eco-friendly materials are more expensive than normal materials, Therefore, using eco-friendly materials at public housing project is limited to economical aspect. The purpose of this paper is development of eco-friendly material selection model considered cost efficiency. The selection of Eco-friendly finishing materials and their methods are constructed to consider environmental performance level and cost index compositively. Development of eco-friendly material selection method is economic and reasonable one when public housing is constructed.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.340-344
• /
• 2011

건축물 마감재료의 연소시 발생되는 독성가스는 대형화재로 인한 인명피해의 주된 원인 중의 하나이다. 현행 건축법에서는 건축물마감재료에 대하여 동물의 평균행동정지시간을 측정하는 가스유해성시험을 실시하고 있다. 본 연구는 동물시험이 아닌 NFPA 269에 의한 유효량분율(FED: Fractional effective does)을 이용하여 건축물 마감재의 독성지수를 도출하였다. 현행 가스유해성 평가 방법에서 사용되는 채임버(피검상자)를 이용하여 적외선분광분석 및 산소분석기로 연소가스를 정량 분석하였으며, NFPA269에서 규정하는 FED를 도출하였다. 몇 가지 건축재료에 대한 가스유해성시험의 평균행동정지시간과 FED의 상대적인 비교를 통해 연소가스독성평가를 수행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6504-6513
• /
• 2013

The result can be summarized as follows. First, the following periodically changing characteristics were examined:roof form(gambrel/hipped-flat-gable), structure of roof and wall(wood-framed-cement masonry-RC-Light iron framed), roof material(thatched-tiled-slate-cement/steel sheet-asphalt/sandwich panel/mortar water-proofing), wall material(clay plaster/lime plastered-dressing tile/bricks-painting on the cement plastering-native stone dressing/siding/tile), fence material(masonry of stone and cement bricks), and courtyard materials(clay and concrete). Secondly, the regionally changing characteristics of those elements, rural housing structure, roof form, roof structure material, wall finishing material, fence and courtyard material in the outer space, differed according to the location of rural housing, i.e.north, middle, south region. The changing characteristics of both the roof structure and wall structure are similar to those of the three regions.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.343-359
• /
• 2017

Many researches and policies have been carried out for saving energy in buildings. However, there are a few studies of thermal characteristics of wood-based materials that have been widely used as structural materials and finishing materials in buildings. In this study, thermal bridging areas were found to investigate thermal performance of residential building using non wood-based materials and wood-based materials. And heat transfer analysis of 16 case studies according to composition of structural materials and finishing materials was conducted. Also in this experiment, Physibel Trisco was used as the heat transfer analysis simulation tool, which conforms to the calculation method of ISO 10211. Analytical modeling was also carried out according to the ISO 10211, and the boundary temperature conditions were set at room temperature $20^{\circ}C$ and outdoor temperature $-11.3^{\circ}C$ (Seoul standard) according to the energy saving design standard in South Korea. Applied structures are classified according to the cases of concrete structure with non wood-based finishing materials, concrete structure with wood-based finishing materials and wood structure. Analyzed building elements were divided into a wall, a roof, an interlayer floor and a bottom floor. As a result, it can be confirmed that the thermal bridge of the concrete structure and wood structure were caused by the geometrical and material causes. In addition, the structural thermal bridge was caused in the discontinuity of the insulation in the concrete structure. Also it was confirmed that the linear heat transfer coefficient of the wall decreases when the wood-based materials are applied to the concrete structure.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.46-53
• /
• 2022

The railway platform is an important facility closely related to the safety of passengers, trains, and images of railway facilities, and requires thorough facility management. However, the problem that the finishing material (plastering mortar) for the joint finishing of dissimilar materials (concrete+granite) falls off in the direction of the track at the platform podium is occurring multiple times across the country. Since these problems threaten the safety of train operation and the safety of passengers, immediate and continuous management is required. This study tried to derive improvement plans through the analysis of the drop-off problem of finishing materials occurring at the platform podium. The status of missing finishing materials for the platform podiums of about 200 railway stations and the related design and construction standards of the Korea National Railway were investigated. After that, the cause of the drop-off of the finishing material was analyzed, and as a result, it was found that the main cause was the boundary between the roadbed and the architectural process that occurred during construction. Subsequently, in connection with the derived causes and design, construction standards, (1) improvement of finishing materials or construction methods, (2) design of finishing materials that are easy to adjust height, (3) design of separate finishing methods, (4) improvement methods and durability were suggested.

• Conservation Science in Museum
• /
• v.20
• /
• pp.93-106
• /
• 2018

The musical instruments displayed in Korean Museums consist of various materials such as wood, stone, metal, leather, and soil. As for instruments manufactured of organic materials, as time passed, they became damaged due to physical, chemical and biological effects. In order to restore these instruments, studies on the materials as well as the manufacturing techniques should be simultaneously conducted because of the characteristics of sound making instruments. In this study, 17th century Double bass were chosen as the model for the restoration study. The type of wood was identified and the finishing layer was analyzed. To investigate the finishing layer, the surface observation was conducted and the component analysis was also conducted by using both FT-IR and SEM-EDS. As a result, the species of wood were identified as the maple trees. In case of the finishing layer of it, the diluted Goma Lacca, a type of resin, with alcohol as the main solvent was covered for varnishing layer. These results were combined to determine the restoration of Double bass Maggini Giovanni Paolo varnishing layer and by this Violin was made.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.953-956
• /
• 2007

"Eco-friendly construction"is an emerging issue in the building industry. Main purpose of the eco-friendly construction is to sustain the health and environment of building residents and to minimize the harmful effect on their environment. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Environmental performance is to meet through using the highest grade eco-friendly materials. However, generally eco-friendly materials are more expensive than normal materials. Therefore using eco-friendly materials at public housing project is limited to economical aspect. The purpose of this paper is development of eco-friendly material selection model considered cost efficiency. The selection of Eco-friendly finishing materials and their methods are constructed to consider environmental performance level and cost index compositively. Development of eco-friendly material selection method is economic and reasonable one when public housing is constructed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.829-832
• /
• 2008

Since the early 1980s, the building is dramatically higher increases. Therefore, the shortage of parking spaces as a social problem has been pointed out. The parking lot utilization of underground space is increasing by like this problem solving countermeasure. However, Most of the organic material is used for construction in the parking lot on the floor. The existing parking zone flooring occupancy surface finishing is harmful gases and environmental hormones cause of the worker. The study on the safety of the worker consider using environment-friendly?high-liquidity ceramic resin mortar materials to evaluate the characteristics and physical properties.