• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.659-662
• /
• 2012

Yttrium (Y) and niobium (Nb) doped spherical $Li_4Ti_5O_{12}$ were synthesized to improve the energy density and electrochemical properties of anode material. The synthesized crystal was $Li_4Ti_5O_{12}$, the particle size was less than $1{\mu}m$ and the morphology was spherical and well dispersed. The Y and Nb optimal doping amounts were 1 mol% and 0.5 mol%, respectively. The initial capacity of the dopant discharge and charge capacity were respectively 149mAh/g and 143 mAh/g and were significantly improved compared to the undoped condition at 129 mAh/g. Also, the capacity retention of 0.2 C/5 C was 74% for each was improved to 94% and 89%. It was consequently found that Y and Nb doping into the $Li_4Ti_5O_{12}$ matrix reduces the polarization and resistance of the solid electrolyte interface (SEI) layer during the electrochemical reaction.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.203-207
• /
• 2018

In this work, we investigate the effects of lithium doping on the electric performance of solution-processed n-type zinc tin oxide (ZTO)/p-type silicon carbide (SiC) heterojunction diode structures. The proper amount of lithium doping not only affects the carrier concentration and interface quality but also influences the temperature sensitivity of the series resistance and activation energy. We confirmed that the device characteristics vary with lithium doping at concentrations of 0, 10, and 20 wt%. In particular, the highest rectification ratio of $1.89{\times}107$ and the lowest trap density of $4.829{\times}1,022cm^{-2}$ were observed at 20 wt% of lithium doping. Devices at this doping level showed the best characteristics. As the temperature was increased, the series resistance value decreased. Additionally, the activation energy was observed to change with respect to the component acting on the trap. We have demonstrated that lithium doping is an effective way to obtain a higher performance ZTO-based diode.

• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.49-57
• /
• 2019

Layered $LiNi_{0.83}Co_{0.11}Mn_{0.06}O_2$ cathode materials single- and dual-doped by the rare-earth elements Ce and Nd are successfully fabricated by using a coprecipitation-assisted solid-phase method. For comparison purposes, non-doping pristine $LiNi_{0.83}Co_{0.11}Mn_{0.06}O_2$ cathode material is also prepared using the same method. The crystal structure, morphology, and electrochemical performances are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) mapping, and electrochemical techniques. The XRD data demonstrates that all prepared samples maintain a typical ${\alpha}-NaFeO_2$-layered structure with the R-3m space group, and that the doped samples with Ce and/or Nd have lower cation mixing than that of pristine samples without doping. The results of SEM and EDS show that doped elements are uniformly distributed in all samples. The electrochemical performances of all doped samples are better than those of pristine samples without doping. In addition, the Ce/Nd dual-doped cathode material shows the best cycling performance and the least capacity loss. At a 10 C-rate, the electrodes of Ce/Nd dual-doped cathode material exhibit good capacity retention of 72.7, 58.5, and 45.2% after 100, 200, and 300 cycles, respectively, compared to those of pristine samples without doping (24.4, 11.1, and 8.0%).

• 전기화학회지
• /
• 제18권1호
• /
• pp.17-23
• /
• 2015

$Li_4Ti_5O_{12}$는 우수한 안정성으로 자동차용 리튬 이온 이차전지의 음극 활물질로서 각광 받고 있다. 그러나 넓은 밴드갭에 기인한 절연체 특성으로 고율 충/방전을 가능하게 하기 위해서는 전자 전도도의 개선이 필수적이다. 본 연구에서는 Cr 도핑을 통해 $Li_4Ti_5O_{12}$의 전자 전도도 개선을 목표로 하였으며, wet-mixing법을 통한 물질 합성시 도판트인 Cr 프리커서의 용해도 차이에 의한 Cr-doped $Li_4Ti_5O_{12}$의 전기화학적 특성 변화를 고찰하고자 하였다. 시료의 물리적 특성은 ICP, XRD, SEM, EXAFS을 통하여 확인하였고 1.0V~3.0V (vs. $Li/Li^+$) 하에서 충/방전 특성을 조사하였다. 프리커서의 용해도는 합성된 물질의 상(phase) 및 모폴로지에 큰 영향을 미쳤으며, 가장 용해도가 높은 $Cr(NO_3)_2$ 프리커서로부터 합성된 경우 Bare $Li_4Ti_5O_{12}$와 비교하여 약 2배 개선된 고율 충/방전 특성(130 mAh/g @ 10 C)을 확인하였다.