• Journal of Broadcast Engineering
• /
• 제25권1호
• /
• pp.109-112
• /
• 2020

VVC uses 67 modes in intra prediction. Most probable mode (MPM) is used to reduce data for the representation of intra prediction mode. If the mode to send exists in the MPM candidate, the index of the MPM list is transmitted. If it does not exist in the MPM candidate, TBC encoding is applied. When TBC is applied in intra prediction, three are selected in order of low number mode and coded into 5 bits. The remaining modes except the mode encoded by 5 bits are encoded by 6 bits. In this paper, we examine the limitations of the TBC used in VVC intra prediction and propose an adaptive method that can encode more efficiently than conventional methods when using TBC in intra prediction. As a result, the coding efficiency of the overall coding performance is 0.01% and 0.04% in AI and RA, respectively, compared with the conventional coding method.

• Journal of Broadcast Engineering
• /
• 제18권5호
• /
• pp.691-701
• /
• 2013

In this paper, an early termination algorithm for merge process is proposed to reduce the computational complexity in High Efficiency Video Coding (HEVC) encoder. In the HEVC, the same candidate modes from merge candidate list (MCL) are shared to predict a merge or merge SKIP mode. This search process is performed by the number of the obtained candidates for the both of the merge and SKIP modes. This may cause some redundant search operations. To reduce this redundant search operation, we employ the neighboring blocks which have been encoded in prior, to check on the contextual information. In this study, the spatial, temporal and depth neighboring blocks have been considered to compute a correlation information. With this correlation information, an early termination algorithm for merge process is suggested. When all modes of neighboring blocks are SKIP modes, then the merge process performs only SKIP mode. Otherwise, usual merge process of HEVC is performed Through experimental results, the proposed method achieves a time-saving factor of about 21.25% on average with small loss of BD-rate, when comparing to the original HM 10.0 encoder.

• The Korean Journal of Nuclear Medicine Technology
• /
• 제16권1호
• /
• pp.86-90
• /
• 2012

Purpose: Quantification of myocardial blood flow (MBF) using dynamic PET imaging has the potential to assess coronary artery disease. Rb-82 plays a key role in the clinical assessment of myocardial perfusion using PET. However, MBF could be overestimated due to the underestimation of left ventricular input function in the beginning of the acquisition when the scanner has non-linearity between count rate and activity concentration due to the scanner dead-time. Therefore, in this study, we evaluated the count rate linearity as a function of the activity concentration in PET data acquired in list mode. Materials & methods: A cylindrical phantom (diameter, 12 cm length, 10.5 cm) filled with 296 MBq F-18 solution and 800 mL of water was used to estimate the linearity of the Biograph 40 True Point PET/CT scanner. PET data was acquired with 10 min per frame of 1 bed duration in list mode for different activity concentration levels in 7 half-lives. The images were reconstructed by OSEM and FBP algorithms. Prompt, net true and random counts of PET data according to the activity concentration were measured. Total and background counts were measured by drawing ROI on the phantom images and linearity was measured using background correction. Results: The prompt count rates in list mode were linearly increased proportionally to the activity concentration. At a low activity concentration (<30 kBq/mL), the prompt net true and random count rates were increased with the activity concentration. At a high activity concentration (>30 kBq/mL), the increasing rate of the prompt net true rates was slightly decreased while the increasing rate of random counts was increased. There was no difference in the image intensity linearity between OSEM and FBP algorithms. Conclusion: The Biograph 40 True Point PET/CT scanner showed good linearity of count rate even at a high activity concentration (~370 kBq/mL).The result indicates that the scanner is useful for the quantitative analysis of data in heart dynamic studies using Rb-82, N-13, O-15 and F-18.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• 제3권1호
• /
• pp.73-103
• /
• 2008

Over the past few years, "business models" has surged into the management vocabulary. But, while it has become quite fashionable to discuss business models, there has been still much confusion about what are business models and how they could make. In fact, business models can serve a positive and powerful role in corporate management. While other authors have recently offered definitions of "business model", none of them appears to be generally accepted. This paper presents the absence of the generally definition of the business models, elements of business model and classify business logic. To help start-up entrepreneurs better understand, found and check business models thus, this paper propose a method of business model, understanding, founding and checking. The dissertation will present an effective business model building method which is necessary for the start-up entrepreneurs to start business. This paper consists of three parts. first is showing the previous study of business model. The second is the re-definition business model and elements based on the first and to present a new method of business model plating and checking for start-up IT (information technology) company's entrepreneurs. The last is application of the methode. This study applied the methode to a company which is located in "DAEDEOK INNOPOLIS"; this company has specialized Information technology.

• The Korean Journal of Nuclear Medicine Technology
• /
• 제21권2호
• /
• pp.65-73
• /
• 2017

Purpose 3D 프린팅 기술은 3D 스캔이나 모델링을 통하여 적측가공 방식으로 제작하는 기공기술로서 금형 없이 직접 생산이 가능하고 빠른 시간 내에 제작이 가능하여 최근 다양한 산업분야에서 본격적으로 적용되고 있다. 3D 프린팅 기술은 의료분야에 있어, 영상의학 및 방사선 치료분야에서 다양하게 활용되고 있지만 핵의학 분야에서는 관련 연구가 미비한 실정이다. 그러므로 본 연구는 기존에 적용되고 있는 핵의학분야 팬텀과 3D 프린팅 기술로 제작된 텀의 특성을 비교하고 적용 가능성을 평가하는데 목적을 두었다. Materials and Methods 방사선 투과도 변화측정 국제기준 팬텀인 알루미늄(Aluminum) 계단 쐐기(step wedge)를 기준($140mm{\times}62mm{\times}35mm$)으로 PMMA(Poly Methyl Meta Acrylate)와 ABS(Acrylonitrile Butadiene Styrene)재질로 각각 동일한 크기의 팬텀을 제작하였다. PMMA 팬텀은 핵의학 분야에서 주로 적용되는 팬텀의 성분과 동일한 소재로 제작하였고, ABS 팬텀 제작은 3D 프린팅 기술의 액체 기반형의 SLA(Stereo Lithography Apparatus)기법을 사용하여 제작하였다. 본 연구는 SPECT/CT장비 BrightView XCT(Philips Health Care, Cleveland, USA)를 이용하였다. 영상 획득은 Rectangular Flood phantom(Biodex, New York, USA) $^{99m}TcO_4$ 3, 6 mCi와 $^{57}Co$ lood phantom(adqual, New Hampshire, USA) $^{57}Co$ 20 mCi를 이용하여 Aluminum, PMMA, ABS 팬텀에 대해 60 min 리스트모드(List mode)로 획득하였다. 획득한 영상의 분석을 위해 관심영역(ROI)을 설정하여 각 팬텀의 단계별로 평가하였다. Results 방사선원의 종류 및 방사선량에 따라 ABS 팬텀의 계수치는 PMMA 팬텀의 계수치와 유사한 값을 나타내며, 두께의 증가에 따라 선형적으로 감소하였다. Aluminum, PMMA, ABS 팬텀의 선감약계수를 비교했을 때, Aluminum 팬텀의 선감약계수는 나머지 두 팬텀보다 수치가 높았고, PMMA, ABS 팬텀에서는 근사치의 선감약계수가 나타났다. Conclusion 3D 프린팅 기술로 제작된 ABS 팬텀을 기준으로 PMMA 팬텀은 두께가 증가함에 따른 계수치의 변화가 유사하게 선형적으로 감소하였고, 선감약계수도 근사치로 나타내었다. ABS 팬텀의 핵의학적 적용 가능성을 확인할 수 있었으며, 추후 연구를 통해 세부적인 교정치(correction value)를 적용한다면 활발한 적용이 가능하리라 사료된다.

• Journal of the Korea Society of Computer and Information
• /
• 제12권2호
• /
• pp.123-130
• /
• 2007

The aim of this study was to propose a fusion and registration method with heterogeneous small animal acquisition system in small animal in-vivo study. After an intravenous injection of $^{18}F$-FDG through tail vain and 60 min delay for uptake, mouse was placed on an acryl plate with fiducial markers that were made for fusion between small animal PET (microPET R4, Concorde Microsystems, Knoxville TN) and Discovery LS CT images. The acquired emission list-mode data was sorted to temporally framed sinograms and reconstructed using FORE rebining and 2D-OSEM algorithms without correction of attenuation and scatter. After PET imaging, CT images were acquired by mean of a clinical PET/CT with high-resolution mode. The microPET and CT images were fusion and co-registered using the fiducial markers and segmented lung region in both data sets to perform a point-based rigid co-registration. This method improves the quantitative accuracy and interpretation of the tracer.

• Journal of Internet Computing and Services
• /
• 제8권2호
• /
• pp.1-13
• /
• 2007

GPS/GIS and RFID technologies have been changing the paradigm af our society toward ubiquitous era. Especially, geographically distributed mobile agents with transporting objects need to be automatically recognizable and traceable under certain conditions. To do this, fundamental theories and technologies are required to specify and verify spatial and temporal behaviors of agents on geographical space. This paper presents a new formal method, called Calculus of Real-Time Distribution, Mobility, and Interaction (CaRDMI), for this purpose. For specification, CaRDMI defines a map, mobile agents with transporting objects. The movement of on agent is represented by a path on the map, consisting of a list of nodes and a list of edges with spatial and temporal constraints. Interactive constraints among agents are represented by synchronization modes on objects at nodes. These constraints are distinguishable features of CaRDMI from other methods. Especially, many-to-many timed synchronization constraints are noticeable. For verification, CaRDMI presents the spatial, temporal and interactive deduction rules and the spatial and temporal equivalence relations.

• Korean Journal of Construction Engineering and Management
• /
• 제10권3호
• /
• pp.83-91
• /
• 2009

Construction industry is a complex industry which should be invested with plenty capital, manpower and resources. Investment factors and inner and outer environmental factors should be managed systemically in terms with risk factors possible to occur. It maximizes the profit to establish construction management by managing risk systemically. While previous studies were executed with risk related to some special progress lively, studies about risk in managing construction company leave much to be desired. Therefore, this study examined risk in the whole construction management, showed the checklist and deduced the quantitative factors through questionnaire analysis from specialists. Also, priority and grade of construction management factors were evaluated by analyzing weight of construction risk factors.

• The Journal of the Convergence on Culture Technology
• /
• 제10권1호
• /
• pp.551-557
• /
• 2024

Hydrogen is a renewable energy source with various characteristics such as clean, carbon-free and high-energy, and is internationally recognized as a "future energy". With the rapid development of the hydrogen energy industry, more hydrogen infrastructure is needed to meet the demand for hydrogen. However, hydrogen infrastructure accidents have been occurring frequently, hindering the development of the hydrogen industry. HyRAM+, developed by Sandia National Laboratories, is a software toolkit that integrates data and methods related to hydrogen safety assessments for various storage applications, including hydrogen refueling stations. HyRAM+'s physics mode simulates hydrogen leak results depending on the hydrogen refueling station components, graphing gas plume dispersion, jet frame temperature and trajectory, and radiative heat flux. In this paper, hydrogen leakage data was extracted from a hydrogen refueling station in Samcheok, Gangwon-do, using HyRAM+ software. A hydrogen leakage simulator was developed using data extracted from HyRAM+. It was implemented as a dashboard that shows the data generated by the simulator using a database and Grafana.

• Journal of the Korean Society of Radiology
• /
• 제15권6호
• /
• pp.891-897
• /
• 2021

With the development of Amyloid PET Tracer, the accuracy of Alzheimer's diagnosis can be improved through the identification of beta-amyloid neurites. However, the long image acquisition time of 20 minutes can be difficult for the patient. PET/CT scans are sensitive to patient movement and may partially affect test results. In this study, we studied the proper image acquisition time without affecting the quantitative evaluation of the image through the list mode acquisition method according to the time of the distribution of radioactive drugs in the body. The list mode includes information about time compared to the existing frame mode, and it is easy to analyze data because it can reconstruct images about the time that researchers want. The research method obtained a reconstructed image by time using a list mode of 5min frame/bed, 10min frame/bed, 15min frame/bed, and 20min frame/bed to compare the difference between signal-to-pons take ratio (SNR) and lesion-to-pons uptake ratio (LPR) and the difference in reading time to obtain an appropriate image. As a result of quantitative analysis, when measuring in list mode, SUVmean values decreased in 6 regions of interest as the image acquisition time increased, but showed the largest difference in 5 min/bed images, followed by 10 min/bed and 15 min/bed. As a result, the difference in SUVmean values decreased. Therefore, it was found that SUVmean values at 15 min/bed did not differ enough to not affect image evaluation. There was no difference in LPR values. As a result of the qualitative analysis, there was no change in the reading findings according to the PET image acquisition time and there was no significant difference in the qualitative analysis score of the image reconstruction according to time. As a result of the study, there is no significant difference between 15 min/bed and 20 min/bed images during the ¹⁸F-flutemetamol PET/CT test, so it can be said that it is clinically useful to reduce the image acquisition time selectively using 15 min/bed via list mode depending on the patient's condition.