• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.216-219
• /
• 2000

Pyrolysis products of woody biomass were consistedofvarious linear hydrocarbon, aromatics or condensed cyclic compounds. In order to obtain biomass pyrolysis products, more equipments and time were needed. But solvolysis of woody biomass with acetone easily obtained decomposition products and enhanced conversion rate(18.72%, max.) from woody biomass than pyrolysis of woody biomass. Beacause solvolysis with acetone improved conversion rate (26.64%, max.) of lignin. the whole conversion rate was improved. But above $300^{\circ}C$, lignin showed lower conversion rate, so the whole conversion rate decreased. Solvolysis products of woody biomass with acetone were same as pyrolysis products. Above $400^{\circ}C$, methoxy phenols were completely disappeared.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.36-43
• /
• 2011

Plant biomass has been proposed as an alternative source of petroleum-based chemical compounds. Especially, aromatic chemical compounds can be obtained from lignin by depolymerization processes because the lignin consist of complex aromatic materials. In this study, kraft lignin, the largest emitted substance among several kinds of lignin in Korea, was used as a starting material and was characterized by solid-state $^{13}C$-Muclear Magnetic Resonance($^{13}C$-NMR), Fourier Transform Infrared Spectroscopy(FT-IR), Elemental Analysis(EA). The depolymerization of kraft lignin was studied at water-phenol mixture solvent in near critical region and the experiments were conducted using a batch type reactor. The effects of water-to-phenol ratio and reaction temperature($300-400^{\circ}C$) were investigated to determine the optimum operating conditions. Additionally, the effects of formic acid as a hydrogen-donor solvent instead of $H_2$ gas were examined. The chemical species and quantities in the liquid products were analyzed using gas chromatography-mass spectroscopy(GC-MS), and solid residues(char) were analyzed using FT-IR. GC-MS analysis confirmed that the aromatic chemicals such as anisole, o-cresol(2-methylphenol), p-cresol(4-methylphenol), 2-ethylphenol, 4-ethylphenol, dibenzofuran, 3-methyl cabazole and xanthene were produced when phenol was added in the water as a co-solvent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.210-211
• /
• 2017

According to KS F 2560, water-reducing agents used when mixing concrete are to undergo quality evaluation testing slump, air contents, setting time, etc., when delivered from the admixture factory to the ready mixed concrete site. Yet in actual acceptance testing this could be substituted by the score report of the admixture company, in which a possibility of low reliability lies. Therefore this study sought to analyze whether by artificially changing the solid content rate of lignin- and naphthalene-based water-reducing agents and using a liquid densimeter evaluate the quality of the admixture. The results showed that the Type B liquid densimeter was most appropriate and 50cc the most appropriate capacity for the mass cylinder. Also, judging from the changes in density and pH according to the changes in solid content rate, it concludes that a rapid appraisal of the quality of lignin- and naphthalene-based water-reducing agents would be possible using a Type B liquid densimeter.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.265-272
• /
• 2023

Lignocellulosic biomass is essential to pretreatment because of having rigid structures and a lot of lignin. Among methods of pretreatment, using THF solvents has the advantage of being easy to reuse. THF (Tetrahydrofuran) used as a co-solvent with water or ionic solvent that is inexpensive and can remove lignin over a wide range of reaction conditions. NaOH (Sodium hydroxide) has been demonstrated to preferentially solvate lignin from cellulose. Thus, NaOH was used as a pretreatment co-solvent for the fractionation of lignin by destroying the ether bond to amend for hydrolysis and expand the surface area of cellulose and hemicellulose. In this experiment, lignin was removed by the NaOH/THF co-solvent pretreatment process to characteristics for the pretreatment and obtain the optimal levulinic acid conversion yield through the acid catalyst conversion process. the NaOH/THF co-solvent system was conducted in various ratios of co-solvent under a total of 16 conditions. And the temperature was 180 ℃ during to 60 mins. The optimum condition of co-solvent is NaOH 5 wt%/THF 90:10(v/v%), 76.8% glucan content was obtained through this co-solvent pretreatment, and 90.1% lignin was removed. In the acid catalyst conversion process, which is a subsequent pretreatment process, the experiment was conducted under the conditions of 30 to 90 min of reaction time and 160 ℃ to 200 ℃ reaction temperature. The optimum condition of acid catalyst conversion process is 60min reaction time under of 180 ℃, and it obtained 84.7% of levulinic aicd conversion yield.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.350-359
• /
• 2016

We performed fast pyrolysis of empty fruit bunch (EFB) in the range of temperature from $400{\sim}550^{\circ}C$ and 1.3 s of residence time. The effect of temperature on the yields and physicochemical properties of pyrolytic products were also studied. Elemental and component analysis of EFB showed that the large amount of potassium (ca. 8400 ppm) presents in the feedstock. Thermogravimetric analysis suggested that the potassium in the feedstock catalyzed degradation of cellulose. The yield of bio-oil increased with increasing temperature in the range of temperature from $400{\sim}500^{\circ}C$, while that of gas and biochar decreased and showed monotonous change each with increasing temperature. When the EFB was pyrolyzed at $550^{\circ}C$, the yield of bio-oil and char decreased while that of gas increased. Water content of the bio-oils obtained at different temperatures was 20~30% and their total acid number were less than 100 mg KOH/g oil. Viscosity of the bio-oils was 11 cSt (centistoke), and heating value varied from 15 to 17 MJ/kg. Using GC/MS analysis, 27 chemical compounds which were classified into two groups (cellulose-derived and lignin-derived) were identified. Remarkably the concentration of phenol was approximately 25% based on entire chemical compounds.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.39-46
• /
• 2005

In this study, the possibility of sugar conversion of poplar wood(Populus $alba{\times}rglandulosa$) and their degradation features of major wood components were characterized using flow type supercritical water treatment system. The finely ground poplar wood meals were treated for 2min. under subcritical condition$(23MPa,\;275^{\circ}C\;and\;325^{\circ}C)$ and supercritical condition $(23MPa,\;375^{\circ}C\;and\;415^{\circ}C)$. respectively. The degradation products of poplar wood meals appeared brownish colors, including undegraded solids. Increasing the temperature of the system, the degradation rate of poplar wood meals was accelerated and reached up to $94\%\;at\;375^{\circ}C$. The total amount of reducing sugars in degradation products determined by DNS method were gradually lowered when the temperature condition became severe. This indicated that the reducing sugars formed were further degraded to kan derivatives by certain side reaction such as pyrolysis under higher temperature. In order to characterize degradation features of lignin, the degradation products were extracted with ethylacetate and the organic phases were subjected to GC-MS analysis. Main lignin degradation products were identified to vanillin, guaiacol, syrinaldehyde, 4-prophenyl syringol and dihydrosinapyl alcohol, which could be formed by the cleavage of ether linkages in lignin polymers by high temperature condition.

• Proceedings of the Korea Forestry Energy Research Society Conference
• /
• 2011.02a
• /
• pp.127-129
• /
• 2011

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.598-601
• /
• 2007

셀룰로오스, 헤미셀룰로오스, 리그닌으로 구성된 목질계 바이오매스를 이용한 가스화의 경우 30%의 리그닌 성분이 열에 안정한 상태인 타르로 형성되면서 가스화 후단공정에서의 정제, 발전 등에 직접 사용하기 어려우며, 가스화 효율을 저하시키는 원인이 된다. 이의 문제 해결을 위하여 본 연구에서는 촉매를 이용한 수증기 개질 반응을 통하여 타르를 합성가스로 개질시킬 수 있는 방법을 모색하기 위하여 다양한 온도, 촉매, 스팀 주입량 및 촉매크기에 따른 전환율, 생성가스 특성을 알아보았다. 타르 대상 물질로는 타르 내 상당부분을 차지하고 있는 톨루엔을 이용하였다. 일반적으로 반응온도, 스팀 주입량이 증가할수록 수소 생성량이 증가하였으며, 지르코니아로 증진된 니켈 촉매의 경우 600$^{\cdot}C$ 에서도 100%의 높은 전환율을 보였다. 일반적인 가스화기에서 배출되는 타르의 농도보다 10배 높은 조건에서도 100%의 높은 전환율을 얻을 수 있었으며, 이를 통하여 실제 공정으로의 적용시에도 후단 공정의 부담을 줄일 수 있는 개질기로 적용 가능할 것으로 보인다.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.815-821
• /
• 2005

Three major commercially available organic chemical admixtures are modified lignosulfonates (LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehyde (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps including hydroxymethylation (Step 1), sulfonation (Step 2), polymerization (Step 3) and neutralization and stabilization (Step 4). In this synthesis, mole ratio of melamine to formaline and the amount of acid catalyst used were varied. The obtained SMF superplasticizers were applied to cement paste and mortar and their physical properties including workability, slump loss, compressive strength were investigated. Also their hydrate shapes were investigated by examining SEM images of the cured paste. It was found that the fluidity properties of cement were significantly influenced by the structure of SMF condensates.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.25-35
• /
• 1997

오늘날 열대림 면적의 급격한 감소, 지구온난화등 지구환경 보전의 관점에서 이들 목재이외의 자원의 활용 및 양마와 같은 새로운 비목재자원 개발의 중요성이 재인식되기에 이르렀으며, 이 가운데서 양마는 생장이 라르고 수확량이 크며, 목질부의 단섬유는 물론 긴 섬유장을 가진 인피부섬유로 구성되어 있고, 실리카함량도 매우 적어, 특히 산림자원이 부족한 개발도상국에서 펄프.제지용 자원으로서 주목되고 있다. 양마가펄프.제지용자원으로서 오늘날과 같은 세계적 주목을 받게 된 것은 미국 농무성 북부지역연구센타 에서 이루어진 “새로운 섬유작물”에 관한 기초연구에서 양마가 제지용 섬유작물로서 높이 평가되고 있다. 양마의 경우 인피부는 비교적 리그닌함량이 적고, 목질부는 활엽수재에 가까운 리그닌을 함유하고 있는데다, 섬유형태에 있어서도 인피부와 목질부간에 큰 차이가 발견된다. 본 연구에서는 양마를 중성아황산법으로 전처리하여 제조한 반화학펄프로 부터 제조한 종이의 광학적 성질을 검토하였다 펄프의 광학적 성질은 원료의 화학적 조성,섬유의 형태, 부위.화학적 처리정도, 원료의 저장기간 및 충전제의 첨가에 따라 크게 영향을 받았다. 장섬유와 낮은 리그닌함량을 가진 전간부 펄프시트는 불투명도가 낮았으며, 목질부 펄프로부터 상대적으로 밀도가 다소 높고, 불투명도도 높은 종이를 만들 수 있었다. 펄프원료의 저장기간이 백색도를 낮추었으며, 불투명도에는 그다지 영향하지 않았다. 약품전처리 및 표백이 백색도 및 불투명도에 크게 영향하였고, 특히 충전제 첨가로 광산란을 증가시켜 불투명도가 높은 종이를 제조할 수 있었다.6. CL종의 난황콜레스테롤 수준에 대한 계란의 일령 상호간에는 전체적으로 상호간에 차이가 없었다. 7. 26주령시 혈중콜레스테롤 수준은 CL종이 다른 두 육계종들 보다 유의적 (P$\leq$0.05)으로 높았다. 8. 성별간 혈중콜레스테롤 수준의 차이는 CL종, BR1 및 BR2 중에서 CL종에서만 나타났으며, 수컷은 암킷보다 혈액 100 mL당 약 90 mg이 낮았다.구체적인 생화학적인 연구가 이루어져야 될 것으로 여겨진다.야 할 것으로 사료된다. 냉장 저장을 하고 저장기간이 길어질 경우는 냉동저장을 사용하는 것이 바람직하다고 생각된다.S, FOS나 말티톨로 대체된 스폰지 케익은 설탕 100% 사용한 케익과 비교하여 크게 나쁘지 않거나 휠씬 나은 특성을 보이므로 스폰지 케익 제조에 그들의 이용이 가능함을 확인하였다.thione 같은 다른 항산화제의 절약 효과, CYP2El의 유도 저하를 통하는 것으로 생각되며 그중 어떤 것에 가장 큰 영향을 받는 지는 아직 알려지지 않았고 더욱 많은 연구가 요구된다.우와 사료에 $\omega$3계 지방산 급원을 첨가, 동물에게 이행시켜 $\omega$3계 지방산 강화식품을 제조하는 두 가지 방법이 있을 수 있는데 전자는 통조림, 과자, 건강보조식품류에 다용되며 후자는 다양한 기능성 축산식품에 활용되고 있다. $\omega$3계 지방산 강화 축산식품에는 돼지고기, 우유, 치이즈, 계란, 분유, 햄 등 다양한 제품에 활용, 개발되고 있으며 최근에는 이러한 식품 개발에 더욱 박차가