• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.164.2-164.2
• /
• 2016

수산화인회석(Hydroxyapatite)는 뼈와 이빨의 무기물의 주성분으로서 칼슘과 인산염으로 구성된다. 본 연구에서는 특정 농도의 염기조건 (10 M NaOH)에서 수열합성법 (hydrothermal method)을 이용하여 수산 화인회석을 합성하였다. 합성된 샘플은 XRD 패턴 및 TEM 이미지 분석을 통하여 단결정성과 일정한 형태를 지닌 수산화인회석이 합성된 것을 확인하였다. 수산화인회석의 표면에 루테늄을 도입하기 위하여 이온교환 반응 과 열처리 과정을 이용하였다. 도입된 루테늄 나노 입자는 TEM 이미지 분석을 통하여 확인하였으며, 일차알콜과 이차알콜등의 유기 산화반응에 촉매로서 사용하였다.

• Clean Technology
• /
• v.26 no.3
• /
• pp.196-203
• /
• 2020

In this study, a Cu/hexaaluminate catalyst was prepared by a co-precipitation method, and then a binder was added to form a pellet. A catalyst in which Ni and Ru promoters were added to a Cu/hexaaluminate pellet catalyst was prepared. This study focused on examining the effect of the addition of Ni and Ru promoters on the properties of Cu/hexaaluminate catalysts and the decomposition reaction of ADN-based liquid monopropellants. Cu/hexaaluminate catalysts had few micropores and well-developed mesopores. When Ru was added as a promoter to the Cu/hexaaluminate pellet catalyst, the pore volume and pore size increased significantly. In the thermal decomposition reaction of ADN-based liquid monopropellant, the decomposition onset temperature was 170.2 ℃. Meanwhile, the decomposition onset temperature was significantly reduced to 93.5 ℃ when the Cu/hexaaluminate pellet catalyst was employed. When 1% or 3% of Ru were added as a promoter, the decomposition onset temperatures of ADN-based liquid monopropellant were lowered to 91.0 ℃ and 83.3 ℃, respectively. This means that the Ru promoter is effective in lowering the decomposition onset temperature of the ADN-based liquid monopropellant because the Ru metal has excellent activity in the decomposition reaction of ADN-based liquid monopropellant, simultaneously contributing to the increase of the pore volume and pore size. After the thermal treatment at 1,200 ℃ and decomposition of ADN-based liquid monopropellant were repeatedly performed, it was confirmed that the addition of Ru could enhance the heat resistance of the Cu/hexaaluminate pellet catalyst.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.256-259
• /
• 2005

본 연구에서는 기존 니켈 활성성분만의 알루미나담지 촉매에 비해 고온에서의 수소를 사용한 환원 전처리 과정을 거치지 않고도 높은 반응활성을 나타내며, 반응 중 탄소침적에 대한 촉매 저항성에서도 우수한 결과를 나타낸 루테늄-니켈 촉매에 대해보고 하고자 한다. 메탄 수증기 개질 반응을 통해, 루테늄을 최종적으로 담지한 알루미나 담지니켈계 촉매는 별도의 전처리과정 없이 $650^{\circ}C$에서부터 높은 반응성을 보였으며, 루테늄과 니켈을 동시에 담지한 경우보다 더 우수한 활성을 나타내었다. Ru의 담지량을 달리한 실험에서는$RU(0.5)/Ni(20)/Al_2O_3$ 촉매가 가장 높은 활성을 보였다. $H_2-TPR$ 분석 결과, $Ru(0.5)/Ni(20)/A1_2O_3$촉매의 경우 세 가지 환원 피크가 나타났으며, $Ni(20)/A1_2O_3$촉매와 비교해 볼 때, 저온(<$130^{\circ}C)$에서 환원가능한 $RUO_2$의 존재를 확인할 수 있었다. 담지된 RU은 분산도가 높아, XRD분석 결과에서 Ru이나 $RuO_2$의 특성 피크가 존재하지 않았다. 또한 $650^{\circ}C$에서 10시간 개질반응 후 얻어진 촉매에 대해 $O_2-TGA$를 분석한 결과, $Ni(20)/Al_2O_3$촉매는 $-7.2wt\%$ 정도의 큰 무게 감소를 보였으며, 이는 촉매 표면에 생성된 carbon tube에 의한 것임을 SEM 분석을 통해 알 수 있었다 이에 반해, $Ru(0.5)/Ni(20)/Al_2O_$ 촉매는 $O_2-TGA$시 $0.3wt\%$ 정도 무게 증가에 그쳤으며, SEM 분석상 carbon tube의 생성이 크게 억제되었음을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.235-236
• /
• 2015

$TiO_2$는 표면적이 넓고 안정성이 높아 자체의 높은 밴드갭(3.0~3.2 eV)에도 불구하고 산업적으로 염소분해 전극으로써 사용되며, 최근 물분해 전극 적용 연구가 진행되고 있다. 전기화학적 물분해 반응을 위해서는 높은 과전압이 요구되므로 산업적으로 이용하기 위해 전도성을 향상시키기 위한 연구가 필요하다. 이러한 문제를 해결하기 위해 촉매제의 도핑이 연구되고 있으며 본 연구에서는 표면에 촉매를 도핑시키기 위한 두가지 방법을 연구하였다. 일반적으로 촉매로 사용되는 금속은 루테늄과 이리듐 등의 귀금속이며 촉매가 균일하게 도핑이 될수록 성능은 향상된다. 본 연구에서는 루테늄을 촉매로 선택하였으며 서로 다른 도핑 방법과 용매 하에서 물분해 실험을 진행하여 두 가지 방법의 물분해 효율을 비교하였다.

• Journal of Adhesion and Interface
• /
• v.19 no.1
• /
• pp.13-18
• /
• 2018

At ruthenium (Ru) catalyst was exposed from the atmosphere, the degree of catalyst activation decreased. The change of catalyst activity with the number of days of exposure to air for the Ru catalyst was confirmed using the surface tension method quantitatively. Mechanical properties and surfactant change after polymerization by DCPD using Ru catalyst for each air exposure day was evaluated. The Ru catalyst mixed with a dilution agent was exposed in the air and color was monitored for each day. Surface tension was measured using Wilhelmy and PTFE and associated with different catalyst activities. Heat was measured in real time during polymerizing DCPD with Ru catalyst. After polymerization, tensile strength was measured for p-DCPD and the change of material property was measured. Interfacial properties were also evaluated via microdroplet pull-out tests between glass fiber and p-DCPD. The surface tension was stable until the 4 days (33 dyne/cm) whereas the surface energy increased at the 10 days (34 dyne/cm), which could be correlated with oxidation of the catalyst. Tensile property and interfacial shear strength (IFSS) was also stable until the 4 days (tensile strength: 38 MPa and IFSS: 26 MPa) whereas the mechanical property decrease at 10 days (tensile strength: 15 MPa and IFSS: 3 MPa) dramatically.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.147-153
• /
• 2007

A simple, selective and highly sensitive flow injection catalytic method was presented for determination of ruthenium based on its catalytic effect on the oxidation of pyronin B by periodate in pH=1.0. The reaction rate is controlled specrophotometricaly by monitoring the dye absorbance at 555 nm. The optimized conditions make it possible to determine ruthenium in the ranges of 0.1-10.0 ng/mL (r2=0.9982) and 10.0-50.0 ng/mL (r2=0.9934) with a detection limit of 0.04 ng/mL and a sample rate of 30±5 samples/h. Relative standard deviation for the results of five replicate measurements does not exceed 1.44%. The proposed method has been successfully applied for quantitation of ultra trace amounts of ruthenium in some environmental and biological samples.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.336-337
• /
• 2015

$TiO_2$는 표면적이 넓고 안정성이 높아 자체의 높은 밴드갭(3.0~3.2 eV)에도 불구하고 산업적으로 염소분해 전극으로써 사용되며, 최근 물분해 전극 적용 연구가 진행되고 있다. 전기화학적 물분해 반응을 위해서는 높은 과전압이 요구되므로 산업적으로 이용하기 위해 전도성을 향상시키기 위한 연구가 필요하다. 이러한 문제를 해결하기 위해 촉매제의 도핑이 연구되고 있으며 본 연구에서는 표면에 촉매를 도핑시키기 위한 두가지 방법을 연구하였다. 일반적으로 촉매로 사용되는 금속은 루테늄과 이리듐 등의 귀금속이며 촉매가 균일하게 도핑이 될수록 성능은 향상된다. 본 연구에서는 루테늄을 촉매로 선택하였으며 서로 다른 도핑 방법과 용매 하에서 물분해 실험을 진행하여 두 가지 방법의 물분해 효율을 비교하였다.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.659-663
• /
• 2016

The efficiency of a heterogeneous ruthenium zirconia catalyst ($Ru(OH)_x/ZrO_2$) was demonstrated to the selective oxidative transformation of alkenes or alkynes. The scissions of C-C double bonds to aldehydes and triple bonds to diketones or carboxylic acids were carried out with (diacetoxyiodo)benzene as an oxidant under dichloromethane (5 mL)/water (0.5 mL) solvent system at $30^{\circ}C$ for wide range of substrates. The $Ru(OH)_x/ZrO_2$composite showed higher catalytic activity and selectivity than other ruthenium-based homogeneous or heterogeneous catalysts for the scission reaction. The catalyst exhibited a high mechanical stability, and no leaching of the metal was observed during the reaction. These features ensured the reusability of the catalyst for several times for the oxidative cleavage of unsaturated hydrocarbons.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.593-596
• /
• 2017

Sodium titanate nanosheets were prepared by a hydrothermal synthesis method under basic conditions. Ruthenium was introduced on the surface of sodium titanate nanosheets through an UV irradiation in the aqueous $RuCl_3$ solution. The crystal phase and morphology of synthesized samples were analyzed by X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. In addition, the content of Ru was evaluated by inductively coupled plasma. It was proposed that a monomeric form of ruthenium was incorporated on the surface of sodium titanate. Ruthenium incorporated sodium titanates were applied to alcohol oxidation using molecular oxygen as an oxidant. The sample with 7% ruthenium showed a catalytic activity with a turnover frequency value of $2.1h^{-1}$ in oxidizing benzyl alcohol to benzaldehyde without any other byproducts at $105^{\circ}C$ and 1 atmosphere.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.297-306
• /
• 2018

This review focused carbon-free hydrogen productions from ammonia decomposition including inorganic membranes, catalysts and the presently studied reactor configurations. It also contains general information about hydrogen productions from hydrocarbons as hydrogen carriers. A Pd-based membrane (e.g. a porous ceramic or porous metallic support with a thin selective layer of Pd alloy) shows its efficiency to produce the high purity hydrogen. Ru-based catalysts consisted of Ru, support, and promoter are the efficient catalysts for ammonia decomposition. Packed bed membrane reactor (PBMR), Fluidized bed membrane reactor (FBMR), and membrane micro-reactor have been studied mainly for the optimization and the improvement of mass transfer limitation. Various types of reactors, which contain various combinations of hydrogen-selective membranes (i.e. Pd-based membranes) and catalysts (i.e. Ru-based catalysts) including catalytic membrane reactor, have been studied for carbon-free hydrogen production to achieve high ammonia conversion and high hydrogen flux and purity.