• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.639-644
• /
• 2015

A cylindrical secondary Li-ion cell is a device in which stored chemical energy is converted to electrical energy via an electrochemical reaction. These cells are widely used for applications that require high capacity and rate power, such as notebooks, power tools, and electric vehicles. The role of a center pin is to retain the channel for gas release, preventing blockage of the hollow of the jelly roll during a charge-discharge cycle, and to prevent an internal short circuit for tearing of separator under mechanical free fall. In this paper, two experiments are conducted with and without the center pin to experimentally verify the importance of the role of the center pin. The first experiment is a 50-cycle charge-discharge cycle test, and the second is a free fall test conducted according to the Underwriters Laboratories (UL) standards. Based on these experiments, we demonstrate that the center pin in a cylindrical cell is a very important component in terms of safety.

• Digital Contents
• /
• no.12 s.115
• /
• pp.37-37
• /
• 2002

"최근 BSA가 전문조사기관에 의뢰한 조사결과, 한국기업은 소프트웨어 자산으로 여기고 관리하는 인지율이 아태지역 주요 8개국 중 가장 높았다. 그러나 완전한 소프트웨어자산관리 모델을 도입한 곳은 47%에 불과해 적극적인 대 정부 차원의 교육이 필요한 시점이다." 롤랜드 찬 사무용품소프트웨어연합회 아태지역 마케팅 총괄이사는 지난 11월 열린 '2002 BSA 통계기자단 워크숍'에서 "한국이 소프트웨어 저작권 분야에서 모범생이지만 여전히 노력해야 할 것"이라고 강조했다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.297-300
• /
• 2009

The roll forming process is often used to manufacture long, thin-walled products such as a pipe. The final cross-section is a comparatively simple open-channel, a closed tube section or a complex profile with several bends. In recent years, that process is often applied to the bumper beam in the automotive industries. In this study, a optimal Center Floor Cross Member manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle, and also effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.3
• /
• pp.173-179
• /
• 2022

This study presents a roll-to-roll process which is capable of Ag nanowire (AgNW) transfer from polyethylene terephthalate (PET) film to polycarbonate (PC) film. We developed a roll-to-roll machine that consists of two film suppliers, a coater of photo-curable resin, a film laminator, an ultraviolet (UV) exposure unit, and a film winder to facilitate large-area electrode transfer between different flexible substates. Using the process, optimal fabrication condition was investigated by parametric experiments in terms of the UV exposure time, number of thermal cycling, and exposure time of high temperature and humidity. A fabricated AgNW on PC film showed sheet resistance of 52 Ω/sq and optical transmittance of approximately 80 % over a range of visible light.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.92-98
• /
• 2006

In this paper, a planar car model with 3 degrees of freedom was analyzed using the concept of the roll center. To avoid ambiguity, force components which require experimental data were excluded. Only kinematic approach was used to find the position and orientation of the vehicle body and the position of the roll center. The roll center was found by the pole with infinitesimal movement and Kennedy-Aronhold theorem. Centrodes, which are the loci of instantaneous centers of planar motion, were constructed with analyzed results to show characteristics of vehicle body motion. To verify the presented analysis method in this paper, the locus of the roll center and the motion of a 3 D.O.F. planar car model were compared with those of the 1 D.O.F. model.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1299-1304
• /
• 2010

We examined the working fracture behavior of a silicon-steel strip caused by deformation deviation by performing a pilot rolling test. The deformation deviation resulted in the edges (or center portion) of the strip being stretched and the other parts being compressed in the rolling direction; this was because of different degrees of deformation in these parts. We designed roll grooves shape to reflect the role of roll bending, which generates waviness in the strip in an actual cold rolling process, into the pilot rolling test. The material used in the rolling test was highsilicon steel (about 3%). The results of the test showed that the type of fracture in the strip specimen varied with the magnitude of the deformation deviation. The tensile stress produced at the strip edges because of the center waviness in the rolling direction was a crucial factor that resulted in edge cracking and a zigzag-shaped fracture at the center.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.33-38
• /
• 2019

This study refers to the deodorization of DDM Environmental Resource Center, which is operating abnormally in the food waste public-resource facilities that are operating nationwide, in accordance with the initial operating conditions. Issues concerning the abnormal deodorization facilities of DDM Environment Resource Center were the deodorization of composting facilities, indoor air quality problems, and overall deodorization of facilities, especially the phenomenon of stopping while operating the RTO and the phenomenon of poor spray in the wet scrubber etc. As an alternative and improvement method for converting such abnormal operation facilities into normal operation facilities, It is proposed to remove the front filter of the upper part of the fermentation tank, and to install scrubbers, air and water separator, and roll filters for dust removal etc.

• Journal of The Korean Association of Information Education
• /
• v.20 no.2
• /
• pp.171-178
• /
• 2016

I will introduce robotics education, Novel Engineering, STOMP have hosted in CEEO at Tufts University. CEEO is a leading center for Robotics Education in all over the USA. So far lots of universities and centers have adopted these programs. CEEO have hosted many workshops for students and teachers every summer vacation. And Simple Robotics course is required for every Engineering department freshmen. Novel Engineering(NE) is not familiar to us. I think that NE will be a good tool for integrating reading literacy and engineering. When teachers design a engineering class, members of STOMP help teachers achieve the goals of class. Software Education has been widely spreaded for last several years in South Korea. If our country adopts these programs government-widely. I think that It will be able to contribute to foster SW-talented persons.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.173-180
• /
• 2009

After the UN General Assembly on 2006, Interest on the marine litter has rapidly increased internationally. The UN sub-organizations, UNEP/Regional Seas, FAO(Food and Agriculture Organization of the United Nations) and OC(Ocean Conservancy) as a one of world NGO had been tackled to collect information and prepared world reports related on marine litter, recently, those are published. Through the 10years experience of Korea's policy on marine litter since 1999, it is re-evaluated as a roll model internationally. In this paper, brief introduction of structure and function of Korea's authorities which are responsible for or are involved in the marine litter issue as well as the National Marine Litter Management Basic Plan which is established in 2008, has been provided. This paper also included the structure and roll of the marine litter initiative center in the plan. Change of the paradigm of action plan on marine litter in Korea already had been started.