• The Optical Journal
• /
• s.97
• /
• pp.58-61
• /
• 2005

복굴절이란 하나의 매질로부터 다른 매질로 진입하는 파동이 그 경계면에서 나가는 방향을 바꾸는 현상으로 등방성 매질에서 이방성 매질로 나아갈 때는 경계면에서 굴절파가 두 개로 나뉘어 굴절하게 되는 것을 말한다. 휴대폰용 카메라모듈 렌즈의 사출성형공정에서 발생하는 렌즈 내의 잔류응력에 의한 복굴절률은 사출공정에서의 렌즈불량 발생의 원인이 되며, 잔류응력은 또한 사출성형 이후에 완화되어 렌즈의 외관 치수의 변형을 가져오게 된다. 그러나 플라스틱류를 사용하는 정밀가공 생산 공정 등 실생활에서는 제품의 제조에 있어서 복굴절은 광학적 특성을 결정하는 가장 중요한 요소 중의 하나로서 성형시 복굴절을 최소화할 필요가 있다. 이를 어느 정도 달성했는가의 수준에 따라 플라스틱 정밀 성형 제품의 등급이 결정되는 중요한 측정요소이다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.124-131
• /
• 2007

Aspheric glass lenses was fabricated by glass molding press(GMP), which is a plano-aspheric convox shape and intended for use as an optical design of 3 megapixel and 2.5 magnifications zoom in a camera phone module. Transcription ratio of form accuracy (PV) as well as resolution properties was measured for evaluation the molded lens. Form accuracy (PV) of the mold surface was $0.127\;{\mu}m$ in an aspheric and $0.168\;{\mu}m$ in a plano, in case of the molded lens it shows $0.205\;{\mu}m$ and $0.223\;{\mu}m$, respectively. Resolution of the molded lens was measured as a MTF[Contrast]. The molded lens shows contrast of 32.9% at 80 1p/mm and the value is similar with contrast of 33% obtained simulation.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.9-16
• /
• 1996

We perform computer simulations of a lenticular autostereoscopic display system and obtain two one-dimensional intensity distributions seen by the left and right eyes of the observer, respectively. Our result shows that the lens period should be smaller than the LCD pixel period as the observer moves closer to the system. We obtain the values of the system parameters for which the intensity distributions are uniform across the lenticular lens array. We also obtain the system crosstalks which represent the right pixel image seen by the left eye and the left pixel image seen by the right eye. Our simulation also shows that the crosstalk increases as the observer moves away from the lenticular system.

• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2014

The equivalent of a thick lens is a lens which has the same power of refraction and paraxial imaging characteristics for a reference ray, but with a different axial thickness. In this study, thick lenses of an optical system were converted to their equivalent lenses referenced to pupil imaging. Aberration changes due to the lens conversion were compared to the general equivalent lens conversion referenced to object imaging.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.201-205
• /
• 2000

The colors of a tinted lens for a mixed color could be applied to a subtractive mixture's law, and the estimation of a tinted lens used the properties of optical absorptions and the color analysis. The optical absorption properties of Yellow(x)-Blue(1-x) depended on the yellow color in short wavelength below 500 nm, the absorption in the 550~650 nm wavelength regions depended on the blue color. The absorption band in the 550~650 nm wavelength regions was a peak for an ion of transition metal. The color properties of Yellow(x)-Blue(1-x) analysing by the $L^*a^*b^*$ of CIE system shifted to toward $+a^*$ decreasing x, it was formed of a pure color because of a low saturation existing in +0.6.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.393-403
• /
• 2018

Although the use of silicone hydrogel contact lenses which are known to have high oxygen transmissibility is increasing, they are being sold without any product labeling of physical properties such as water content and oxygen transmissibility. To analyze the physical properties such as the water content and oxygen transmissibility of approved silicone hydrogel contact lenses, this study collected and analyzed the approval information published on the KFDA website. Of 68 cases of domestic silicone hydrogel contact lenses analyzed in this study, 61 cases (89.7%) did not meet the international standard for oxygen permeability. This is because lenses that are not different from hydrogel contact lenses were submitted for approval as silicone hydrogel contact lenses because there is no domestic standard for silicone hydrogel contact lenses. In future, besides the information published on the website, analysis of the physical properties of a wide variety of actual silicone hydrogel contact lenses on the market is required.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.197-198
• /
• 2006

본 연구에서 개발하는 성형렌즈는 그림1과 같이 한쪽 면이 비구면인 평볼록 형상이다. Glass렌즈의 고온압축성형을 위해서는 초정밀 가공기술로 제작된 성형Mold가 필요하며, Mold재질에 따른 성형기술의 확립이 필수적이다. 또한, 성형Mold의 표면과 융착반응이 없는 Glass소재가 요구된다. 본 실험을 위한 성형Mold는 코발트(Co) 함량 0.5 %의 초경합금(WC; 일본, Everloy社, 002K)을 초정밀 연삭가공하여 제작하였다. Glass소재는 전이점(Transformation Point; Tg) $572\;^{\circ}C$,항복점(Yielding Point; At) $630\;^{\circ}C$의 열적 특성을 갖는 K-BK7(일본, Sumita社)을 사용하였으며, d선에서 굴절률 및 아베수는 각각 1.51633, 64.1이다. 비구면 Glass렌즈 성형은 GMP(Glass Molding Press; 일본, Sumitomo社, Nano Press-S)장비를 사용하여 성형온도 $625\;^{\circ}C$, 서냉온도 $550\;^{\circ}C$로 고정하고 성형압력를 200-800 N 범위에서 변화시켰다. 표 1에 성형변수로 사용한 서냉속도와 서냉전환온도 조건을 나타낸다. 표1과 같이 각 서냉조건별로5장의 렌즈를 성형 후 특성값이 평균치에 가까운 3장을 선별하여 그 특성을 비교하였다. 각 조건에 따른 성형렌즈의 형상정도(일본, Panasonic社, UA3P, 자유곡면형상측정기), 두께(일본, Mitutoyo社, MDC-25M, 마이크로메터), 굴절률(일본, Shimatus社, KPR-200, 정밀굴절률측정기) 및 MTF[해상도](독일, Trioptics社, Image Master HR, MTF-Field)를 측정하여 각각의 광학적 특성을 비교 평가하였다. 비구면 Glass렌즈 성형장비와 형상측정기를 그림 2, 3에 각각 나타낸다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.157-164
• /
• 2017

In this research, the overlapped illumination model was used for designing a freeform LED lens with a uniform illuminance distribution on its illuminating plane, and their performances and tolerances were compared. And, the illuminations on a illumination plane was measures for change with average illuminance and illuminance uniformity. As a result of the tolerance analysis about z-axis direction change, thickness change in lens and tilt change of light emission and characteristic change in LED source, overlapped model and divergent illumination model are similar to the performance about Z-axis direction change of light emission in LED source. but the uniformity illumination value in this overlapped model is more remarkably value than it in divergent illumination model about thickness change in LED lens. Also, even though the lens based on a divergent illumination model showed good performance compare to the lens based on an overlapped illumination model, the latter was less the deviation to variation of LED beam radiation ability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.929-934
• /
• 2010

Improvements in characteristics of a single junction AlGaAs/GaAs solar cell are observed by capping a PMMA lens on it. In order to show the effect of the lens, characteristics of a single junction AlGaAs/GaAs solar cell before and after the lens formation are compared under the one-sun illumination condition ($100mW/cm^2$). Characteristics of the solar cell under very weak illumination condition (about 1200 lux) is also measured with the lighting of a fluorescent desk lamp. About 5% of cell efficiency is improved after the capping of PMMA lens on the single junction AlGaAs solar cell and $83\;{\mu}m/cm^2$ of electrical power was generated with the lighting of a desk lamp.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2013

Purpose: Adsorption properties of lysozyme and albumin according to physiochemical properties of commercial contact lens classified with the FDA categories and a contact lens fabricated in the laboratory were investigated. Methods: The contact lens were prepared using HEMA(2-hydroxyethyl methacrylate) and TRIM(3-(trimethoxysilyl) propyl methacrylate) in a cast mold. Artificial tears containing lysozyme and albumin were prepared. We measured the amounts of protein adsorbed on the each lenses with varying adsorbed time (48 hour) and the pH range (6, 6.8, 7.4, 8.2, 9) of artificial tear. Amount of the proteins absorbed on the contact lenses were measured by using HPLC. Results: Time to reach the equilibrium of protein adsorption for silicone hydrogel lens was taken longer than hydrogel lens. The amount of adsorbed both lysozyme and albumin at equilibrium were greater for the hydrogel lens than the silicone hydrogel lens, and larger for the ionic lens than the non-ionic lens. Lysozyme was more adsorbed on the higher water content of contact lens, whereas albumin was more adsorbed on the lower water content of contact lens. Only lysozyme was adsorbed on the Group IV hydrogel lens of ionic higher water content. The adsorption of protein on contact lens increased with pH of artificial tears as close to the isoelectric point of each protein. Conclusions: The adsorption amount of lysozyme is more affected by the ionic strength of the contact lens surface than the water content of contact lens. Albumin adsorption is more affected by water content than the ionic strength of the contact lens surface. For the adsorption of proteins on the silicone hydrogel lens, the pore size, determined both by the number of Si atoms and the chemical structure of the silicone-containing monomers, as well as the polarity of contact lens should be also considered.