• Proceedings of the KACD Conference
• /
• 2003.05a
• /
• pp.288-288
• /
• 2003

1960년대 중반부터 도입된 구치부 복합레진 수복은 복합레진과 접착시스템의 향상된 물성 때문에 구치부 사용에 대한 주목할 만한 결과를 보고하고 있다. 현재는 다수의 1급, 2급 수복물에 복합레진이 적응증으로 기술되며, 사실상 미국치과의사 협회(ADA)도 초기와 중등과 크기의 병소를 보존적 I, II급 와동으로 형성된 뒤 복합레진으로 수복하는 시술의 적절성을 인정하고 있다. ADA는 "복합레진을 유치나 영구치의 I급, II급, V급 수복에 올바르게 적용하면 아발감의 수명에 뒤지지 않는다."라고 기술하고 있다. 이에 본 강연에서는 I급과 II급 복진레진 수복을 위한 관련된 재료들의 특성과 단점들을 극복하기 위한 노력들을 설명하고자 한다. 특히 중합수축과 관련된 문제점들을 해결하기 위해 제시되고 있는 방법들의 임상적 적용 가능성의 한계와 술후 과민증을 줄이기 위한 방법, 그리고 구치부에 적용된 레진들의 마모를 줄일 수 있는 방법들을 모색하고 한다. 더불어 구치부 복합레진 수복을 위한 임상 시술 시 가장 흔하게 발생되는 단조로운 인접면 외형 형성 및 접촉점 개방의 문제점을 인식하고 이를 막기 위한 노력 및 기구들의 사용 조작에 대해 토의해 보고자 한다.

• Restorative Dentistry and Endodontics
• /
• v.28 no.6
• /
• pp.467-474
• /
• 2003

복합레진에 의한 구치부 2급 와동의 수복에서 치은부 변연이 법랑-백아 경계 하방에 위치하는 경우 복합레진의 중합 수축에 의한 응력은 변연부의 폐쇄능력을 저하시키고 이로인한 미세누출은 2차적인 우식이나 술후과민증을 일으켜 임상에서의 성공을 위협한다. 본 연구에서는 2급 와동에서 복합레진으로 수복하기 전에 치은 변연부를 중합수축에 의한 응력을 완화시킬 수 있는 것으로 알려진 몇가지 재료들을 중간층으로 먼저 충전한 후 충전용 복합레진으로 충전한 뒤 치은부 변연에서 이들 중간층과 치질 사이의 미세누출의 정도를 비교하였다. 20개의 발거된 구치의 근, 원심면에 각각 상자 모양의 2급 와동을 형성하고 40개의 와동을 무작위로 10개씩, 4개의군으로 나누었다. 1군은 중간층의 수복없이 Clearfil SE Bond과 Clearfil AP-X로 충전하였으며 2, 3 및 4군은 중간층으로 각각 Revolution, Dyract그리고 FujiII LG를 먼저 충전한 후 1군과 동일한 방법으로 복합레진을 충전하였다. 충전된 시편은 열순환후 2% methylene blue 용액에 12시간 침잠시킨 후 색소의 침투도를 stereomicroscope로 관찰하였으며 실험결과는 Kruskal-Wallis non-parametric independent analysis 및 Mann-Whitney U test로 통계분석하여 다음의 결론을 얻었다. 1. 레진강화형 글라스아이오노머를 중간층으로 먼저 수복하고 복합레진으로 충전한 경우에서 더 적은 미세누출을 보였다(p<0.05). 2. 유동성 레진과 콤포머를 중간층으로 수복한 경우와 복합레진만으로 수복한 경우는 미세누출에 있어서 유의한 차이를 나타내지 않았다(p>0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.382-391
• /
• 2019

This study was aimed to assess the new trial for minimal cavity preparation in composite restoration combined with resin infiltration, focusing at application sequence. 32 human primary molars with early carious lesions around small cavity were selected and randomly divided into two groups, according to the sequence of cavity preparation (P), composite filling (F) and resin infiltration (I) as IPF and PFI group. Each group was assessed about amount of tooth reduction, features of resin infiltration, and marginal leakage around restoration. Amount of tooth reduction evaluated using micro-CT was decreased compared with the original lesion size in both groups. Features of resin infiltration were verified under confocal laser scanning microscopy. In both groups, infiltrant resin was found on all around the composite and maintained in spite of extent of decalcification even after artificial caries induction. Marginal micro leakage assessed with silver nitrate immersion and micro-CT was found more frequently in PFI group. The technique combining resin infiltration and composite restoration might ensure better adhesion prognosis as applied by the sequence of resin infiltration, cavity preparation, and composite filling. This new trial was thought meaningful in minimizing the cavity size and contributing to minimal invasive dentistry.

• The Journal of the Korean dental association
• /
• v.34 no.12 s.331
• /
• pp.855-860
• /
• 1996

치과용 복합레진은 bis GMA형의 monomer가 개발되고, 무기 filler가 첨가되어 물리적인 성질이 더욱 향상되었으며, 또한 법랑질에 대한 산부식법을 통하여 치아에 대한 결합력을 높을 수 있는 방법이 도입되면서 치과용 수복물로서 각광을 받아 왔다. 특히 복합레진은 이전까지 이용되었던 silicate cement 이나 acrylic resin에 비하여 변색이 적고, 원래의 형태를 비교적 잘 유지하는 장점을 가져서 전치부의 수복에 유용한 재료로 인식되었다. 복합레진을 이용한 전치부의 수복은 비교적 적은 치질의 삭제만으로도 가능하고, 심미적으로도 우수한 결과를 보이고 있어서 올바른 술식을 통하여 적절히 이용한다면 좋은 임상적인 결과를 얻을 수 있는 것이 사실이지만 재료학적인 한계가 아직 까지는 엄연히 존재한다. 복합레진을 이용한 전치부의 수복에 있어서, 복합레진의 문제점과 이를 줄이기 위한 방법, 임상시의 주의점 등에 관해 살펴보도록 한다.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.1
• /
• pp.18-23
• /
• 2018

With the increasing demand for esthetics and minimum intervention concept, people want to restore the fractured tooth with direct composite restoration. But even now, many dentists hesitate to do the direct resin restoration in the anterior region and shift the responsibility to dental technicians. This article describes each steps in restoring Class IV cavity. To obtain an esthetic result in anterior restoration, layering technique is mandatory and clinical tips suggested in this article would be useful.

• Restorative Dentistry and Endodontics
• /
• v.35 no.1
• /
• pp.30-39
• /
• 2010

This study evaluated the influence of the type of restoration and the amount of interdental spacing on the stress distribution in maxillary central incisors restored by means of porcelain laminate veneers and direct composite resin restorations. Three-dimensional finite element models were fabricated to represent different types of restorations. Four clinical situations were considered. Type I, closing diastema using composite resin. Labial border of composite resin was extended just enough to cover the interdental space; Type II, closing diastema using composite resin without reduction of labial surface. Labial border of composite resin was extended distally to cover the half of the total labial surface; Type III, closing diastema using composite resin with reduction of labial surface. Labial border of the preparation and restored composite resin was extended distally two-thirds of the total labial surface; Type IV, closing diastema using porcelain laminate veneer with a feathered-edge preparation technique. Four different interdental spaces (1.0, 2.0. 3.0, 4.0 mm) were applied for each type of restorations. For all types of restoration, adding the width of free extension of the porcelain laminate veneer and composite resin increased the stress occurred at the bonding layer. The maximum stress values observed at the bonding layer of Type IV were higher than that of Type I, II and III. However, the increasing rate of maximum stress value of Type IV was lower than that of Type I, II and III.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.282-289
• /
• 2006

The purpose of this study was to compare the ability of three resin surface sealants to prevent microleakage in Class V composite resin restorations. Forty Class V cavities with the occlusal margin in enamel and gingival margin in dentin were prepared on the buccal surfaces of sound extracted molars, and restored with composite resin. Restorations were randomly assigned into one of four equal groups (n = 10): a control group, without resin sealing, and three experimental groups in which margins were sealed with Fortify Plus, Biscover and Permaseal, respectively. Specimens were thermocycled, immersed in a 2% methylene blue solution for 4 hours, sectioned longitudinally, and observed the leakage at the occlusal and gingival margins. The result was analyzed using Kruskal-Wallis test, Mann-Whitney test and Wilcoxon signed rank test. In conclusion, the ability to reduce microleakage at occlusal margins was similar in all of three sealants. However at gingival margin, it depended on the type of used resin surface sealant. At gingival margin. control and Fortify Plus group showed statistically higher microleakage than PermaSeal group. and Fortify Plus group also showed higher microleakage than BisCover group (p < 0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.3
• /
• pp.310-317
• /
• 2019

The purpose of this retrospective study was to evaluate the survival rate of composite resin restorations in permanent first molars in pediatric patients focusing on the influence of risk factors related to patients and teeth. 172 patients (6 - 12 years old) who had their permanent first molars restored with composite resin from July 2010 to July 2012 were investigated. From the dental records, the influence of the risk factors on the survival of restorations was assessed. Location of teeth, classification of cavities, patients' age and caries risk were included as risk factors in this study. The caries risks of patients were evaluated by the value of the decayed-missing-filled teeth index with the records of patients taken at 5 years old. Among 354 restorations, 272 restorations retained and 82 restorations were replaced. The overall cumulative survival rate at 5 years was 73.9%. The main reason for replacement of restorations was secondary caries (81.7%). Patients with older age group and with lower caries risk group showed higher survival rate of restorations. No statistically significant influence was detected between the survival rates and the possible risk factors : location of teeth, patients' age and caries risk. The survival rate of restorations was significantly affected by the classification of the cavities (p = 0.002).

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.65-68
• /
• 2010

Due to the improvement of the composite resin and esthetic desire of the patient, amalgam restoration has been replaced by composite resin. However, still there are many unsolved problems, for example, technique sensitivity, polymerization shrinkage stress and limited mechanical properties. These factors results in fracture of the restoration and secondary caries of the tooth. Also the use of the dental bonding system should be used for the retention of the restoration. In this paper, I want to talk about the present and the future of the remineralizing component released from dental composite resin to overcome the secondary caries and there possibility in the clinical use.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.20-29
• /
• 2006

The purpose of this study was to analyze the stress distribution aspect of unrestored and restored combined shape (wedge shape occulusally and saucer shape gingivally) class V cavity, which found frequently in clinical cases. A maxillary second permolar restored with a combined shape class V composite restorations were modeled using the three dimensional finite element method. Static occlusal load of 170 N was applied on lingual incline of buccal cusp at the angle of $45^{\circ}$ with the longitudinal axis of the tooth. And three dimensional finite element analysis was taken by ANSYS (Version 6.0, Swanson Analysis System Co., Houston, U.S.A) program which represent the stress distribution on unrestored and restored cavity wall and margin. The conclusions were as follows. 1. Compared to the unrestored cavity, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced and in restored cavity. 2. Von Mises stress at the occlusal and cervical cavity margin and wall were increased in restored cavity in comparison with the unrestored cavity. 3. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced more than in the flowable restoration. 4. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the occlusal and cervical cavity margin and wall were increased more than in the flowable restoration.