• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.64-69
• /
• 1999

The paper shows a result for development of BLDC motor drive by using a resolver as position detection sensor. The developed drive use a method detecting rotor position based on HSI interrupt function of microprocessor without a specialized counting circuit. The algorithm generating three-phase PWM wave to change switching voltage and current is realized based on single chip microprocessor. The PWM generating part and position counting circuit are realized by software technique without usage of conventional analogue circuit or object-oriented chips. So the drive system become compact. The effectiveness of the developed drive is verified by experimented results of speed response for step reference input.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.22-24
• /
• 2008

영구자석 동기전동기(Permanent Magnet Synchronous Motor)를 벡터 제어로 구동 시 정확한 회전자 위치정보가 요구된다. 일반적으로 레졸버(Resolver)를 이용하면 회전자의 절대 위치(absolute position)를 알 수 있다. 하지만 레졸버의 변압비 차이, 불평형 여자신호, 불균일한 인덕턴스 성분, 신호처리 회로상의 왜곡으로 인해 신호의 크기 불평형이 발생하고 이는 위치정보에 주기적인 오차 성분이 나타나게 되며, 이러한 오차 성분들은 토크에 영향을 준다. 본 논문에서는 이러한 오차 성분을 수학적 해석을 바탕으로 확인하고 보상하는 방법을 제안하였다. 제안된 알고리즘의 타당성을 실험을 통해 검증하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.756-759
• /
• 2021

본 논문은 기존의 5축 치아가공기나 반도체장비등에 사용하고 있는 회전형 모터의 경우는 엔코더와 리졸버를 사용하고 있다. 엔코더와 레졸버는 고가이므로 실제 산업현장에서 전동기의 위치 센서로는 적용하기가 힘들다. 또한 엔코더와 레졸버와 같은 광학식 위치센서는 그 크기와 내구성에 있어 약점이 있기 때문에 취부 할 때에도 어려움이 있다. 따라서 본 연구에서는 5축치아가공기에 적용하기 위해서 자석가동자를 만들었으며, 이러한 문제점을 해결하는 방안으로 리니어모터를 고정자로 하고 자석플레이트를 이동자로 하는 시스템과 별도의 리니어 스케일을 배제하고 기존의 정현파를 발생하는 2개의 리니어홀센서 및 영구자석을 이용하여 가동자의 절대위치와 이동 위치를 검출할 수 있는 리니어 모터 및 그 제어방법, 안정성 및 신뢰성을 향상시킬 수 있는 자석가동자를 이용하여 구동시 실시간으로 데이터를 확인할 수 있고 제어할 수 있는 모니터링 시스템을 개발하는 연구이다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.593-595
• /
• 2010

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.1
• /
• pp.46-56
• /
• 1991

In this paper, the variable speed control of permanent magnet synchronous motor driven by a sinus¬oidal PWM inverter based on maximum torque sensitivity is presented. The developed torque or speed control is achieved by the field orientation technique. For the field orientation, the resolver is used as the rotor positioning sensor mounted on the motor shaft without pull-out of the synchonism at any speed. To show the validity of proposed control method, the simulation and experimental results are provided. The advantages of the proposed control method are to achieve the fast current and speed responses.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.232-234
• /
• 2017

In this research, the BLDC motor 2 axis controller was designed using a dual core processor. The controller used TMS320F28377D which is TI's latest dual-core DSP, and the BLDC motor was selected with the position of resolver having high reliavility and the speed sensor built-in type motor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.123-128
• /
• 2021

For accurate speed and current control in industrial applications, SRM (Switched Reluctance Motor) is very important to synchronize the stator phase excitation and rotor position in the drive due to its nature. In general, position sensors such as encoder and resolver are used to generate rotational force by exciting the stator winding according to the rotor position and to control the motor by using speed and position information. However, for these sensors, 1) the cost of the sensors is quite large in terms of price, so the proportion of the motor system to the total system cost is high. 2) In terms of mechanical, position sensors such as encoders and resolvers are attached to the stator to increase the size and weight. In conclusion, in order to drive the SRM, control based on the rotor position information should be basically performed, and it is important to design the SRM driving system according to the environment in consideration of the application field. Therefore, in this paper, we intend to study the driving and control characteristics of SRM through variable switching duty control by designing a low-cost analog driving device, deviating from the general control system using the conventional encoder and resolver.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.105-106
• /
• 2016

영구자석형 동기전동기 (Permanent Magnet Synchronous Motor)의 벡터제어와 같이 자극의 위치를 기준으로 제어를 하는 경우 회전자의 위치 정보는 매우 중요하다. 그래서 위치정보를 얻기 위한 센서로 엔코더, 레졸버, 레치형 홀센서를 사용하는데 보통 가격이 싼 BLDC 모터의 경우는 레치형 홀센서를 많이 사용한다. BLDC 모터의 레치형 홀센서 대신 리니어 홀센서를 장착하여 절대위치를 추출하여 벡터제어를 한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.970-977
• /
• 2007

Absolute position detector which is one of the major equipment in the field of factory automation, not only perceives the absolute position of the rotary machine but also outputs switch data according to the given angle. Absolute position detector is composed of sensor module and its controller. In this paper, a sensor driver is implemented using FPGA with VHDL. This chip has a less form factor than conventional circuit. A test shows reliable precision within THD(total harmonic distortion) of 0.2% which can be applicable commercially. Also, FPGA-based phase error compensation methods were newly discussed. In the future, more research will be conducted to enhance the precision by the introduction of 3-phase transformer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1406-1409
• /
• 2004

The Resolver usually used in industry is the absolute angle analog sensor that must be in order to driving BLDC (brushless DC) motor, and it needs RDC(Resolver-to-Digital converter) for changing the output signal to digital to be applied to the SVPWM(Space Vector Pulse Width Modulation) algorithm. Commonly used S/W RDC needs trigonometric function. What it takes a lot of calculation time of processor is gotten at weak point. In this paper, S/W RDC is realized except trigonometric functions as a result of feedback resolver outputs after filtering using FIR filter. thus, processing time is reduced. So, One-chip DSP Controller operating the Vector Control, RDC, and SVPWM can be designed.