• Membrane Journal
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2009

PES (polyethersulfone) membranes with highly enhanced their asymmetry were prepared by phase inversion process. The membranes were prepared by using PES/DMF (N,N-dimethylformamide)/TSA (p-toluenesulfonic acid)/PVP (polyvinylpyrrolidone) casting solution and water coagulant. The pre-coagulation of membrane surface which was induced by an addition of TSA as a demixing agent and PVP as a swelling polymer in the PES solution and humid exposure time, played a crucial role in determining morphological properties and the PWP (pure water permeation) performance. The PES solution was coated on polyester film under condition of 80% humidity for a while ($72{\sim}144$ sec) before immersing in a coagulation bath. The characterization of membranes was carried out by a capillary flow porometer, a FE-SEM and a permeation test apparatus. As the thickness of the smallest pore size layer (SPL) decreased, the asymmetry of membrane increased under conditions of 20 wt% of TSA and 10 wt% of PVP in 11 wt% of PES solution during longer humid contact time. As a result, the membranes showed a remarkable increase of PWP.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.79-89
• /
• 2002

Various geosynthetics used as liners or protection layers are installed in the solid waste landfills. The interface shear strength between geosynthetics installed at the slope of the landfill is a very important variable for the safe design of the bottom and cover systems in the solid waste landfills. The interface shear strength between Geomembrane and Geotexile is estimated by a large direct shear test in this study, The effects of normal stress, water existing between geosynthetics and surface condition of Geomembrae, i.e. smooth or textured, were investigated. The test results show that the effect varied depending on the level of normal stress and the type of geosynthetic combinations. The shear strength was evaluated by the Mohr-Coulomb failure criterion in this research. The shear strength parameters obtained from tests considering the site specific conditions such as normal stress, dry or wet, and surface condition of geosynthetic should be applied to the design of geosynthetics installed at the slope of the landfill to construct a safe solid waste landfill.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.225-236
• /
• 2017

In this paper, a simulation test bed is presented which operates to provide full-scale simulation of airborne multi-function phased array radars. This simulation test bed provides a capability to evaluate the target tracking performance. To realize aircraft operation scenario, we developed 6DOF aircraft dynamics model which can generate trajectories and attitude of an aircraft. This procedure includes steady state flight trim search, autopilot design, and aircraft guidance command design. Also, the radar-environment integrated simulator includes target detection/measurement model and tracking filter. Developed simulator is validated by creating an air-to-air scenario.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1153-1160
• /
• 2019

In this paper, we experimented to find out how the number of convolution layers, the size, and the number of kernels affect the CNN. In addition, the general CNN was also tested for analysis and compared with the CNN used in the experiment. The neural networks used for the analysis are based on CNN, and each experimental model is experimented with the number of layers, the size, and the number of kernels at a constant value. All experiments were conducted using two layers of fully connected layers as a fixed. All other variables were tested with the same value. As the result of the analysis, when the number of layers is small, the data variance value is small regardless of the size and number of kernels, showing a solid accuracy. As the number of layers increases, the accuracy increases, but from above a certain number, the accuracy decreases, and the variance value also increases, resulting in a large accuracy deviation. The number of kernels had a greater effect on learning speed than other variables.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1455-1473
• /
• 2004

This paper suggests a technique, TELOR(Technique of Object Extraction Based on Legacy System Interface for Improvement of Object Reusability) for reuse and reengineering by analyzing the Legacy System interface to distill the meaningful information from them and disassemble them into object units which are to be integrated into the next generation systems. The TELOR method consists of a 4 steps procedure: 1) the interface use case analysis step, 2) the interface object dividing step, 3) the object structure modeling step, and 4) the object model integration step. In step 1, the interface structure and information about the interaction between the user and the Legacy System are obtained. In step 2, the interface information is divided into semantic fields. In step 3, studies and models the structural and collaborative relationship among interface objects. Finally, in step 4, object model integration step, integrates the models and improves the integrated model at a higher level. The objects integration model created through TELOR provides a more efficient understanding of the Legacy System and how to apply it to next generation systems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.55-61
• /
• 2016

Organic fouling observed in submerged membrane filtration as a pretreatment for seawater desalination increases energy consumption for membrane operation because of requiring frequent chemical cleaning and membrane replacement. In membrane pretreatment for seawater facing with algae blooms, membrane fouling was observed in submerged microfiltration using sodium alginate model compound which is one of the main components of extracellular polymeric substances. Without aeration, aglinate fouling increased with its concentration while aeration reduced the alginate fouling effectively regardless of its concentration tested. In the absence of aeration, alingate fouling tended to be decreased with increasing calcium concentration. However, this effectiveness was reduced by increasing sodium chloride concentration. At high concentration of sodium chloride and calcium similar to the seawater conditions, aeration reduced initial fouling. However, as time progressed, the effect of increased airflow rate on fouling reduction was not significant, implying that optimum airflow rate to control alginate fouling in submerged microfiltration can exist.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.26-31
• /
• 2016

Polycaprolactone (PCL) has been fabricated into the membrane type scaffolds of 3 dimensional pore network for the tissue engineering applications by the blade method of salt (NaCl) leaching and solution casting. In this study, the experimental designs have each conditions of drying temperature, salt particle size, salt content. The modified dispensing pump connected up to homogenizing mixer system is used for mixing the $PCL/CHCl_3$ solution and NaCl particles. The membrane fabricated use by the film applicator to poured mixed solution on the glass plate. The great pore by NaCl particles and the small pore by the evaporated $CHCl_3$ in the frame wall of great pores are multiply formed in membrane scaffolds.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.735-740
• /
• 2005

In this paper, we designed a wedge type rail-clamp which can protect container crane from sudden wind blast with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine an angle of wedge which prevent rotating of jaw and for smooth operation when wind blows. Therefore, this paper suggest a process to decide an angle of wedge within proper range obtained by experimental analysis as well as FEA of the wedge type rail clamp. A model with $6^{\circ}$ wedge angle is the most proper model to use in rail clamp bemuse it generated satisfactory clamping force and rotating angle underdesign specification.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.308-315
• /
• 2018

In this paper, we present the basic design results for high-resolution radar development at S-band frequency that can precisely measure the miss distance between two targets. The basic system requirement is proposed for the design of a 3.5 GHz linear frequency-modulated (LFM) radar with maximum detection distance and distance resolution of 2 km and 1 m, respectively, and the specifications of each module are determined using the radar equation. Our calculations revealed a signal-to-noise ratio ${\geq}30dB$ with a bandwidth of 150 MHz, transmission power of 43 dBm for the power amplifier, gain of 26 dBi for the antenna, noise figure of 8 dB, and radar cross-section of $1m^2$ at a target distance of 2 km from the radar. Based on the calculation results and the theory and method of LFM radar design, the hardware was designed using software defined radar technology. The results of the subsequent field test are presented that prove that the designed radar system satisfies the requirements.