• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.72-72
• /
• 1999

• Proceedings of the KAIS Fall Conference
• /
• 2000.04a
• /
• pp.35-35
• /
• 2000

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.375-378
• /
• 1995

Although laser interferometer measurement system has the advantage of range and accuracy, the traditional error measurement methods for geometric errors(two straightness and three angular errors) of a machine tool measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric error of a moving body, an on-line measurement system for simultaneous detection of the five error components of a moving axis is required. An on-line measurement system with 5 degrees of freedom was developed for geometric error detection. Performance verification of the system was performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a side of machine tool.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.240.1-240.1
• /
• 2011

본 연구에서는 펄스레이져 박막 증착법(Pulsed Laser Deposition;PLD)을 이용하여 연자성의 CoNiFe (CNF) 물질과 강유전 특성의$BaTiO_3$ (BTO) 물질을 다층박막 구조로 제작하여 약자장(H=200 Oe)에 의해 에너지를 집적 시키거나 유전상수를 조절하여 박막의 구조 변화에 따른 커패시턴스 변화를 연구하였다. 다양한 구조의 다층 박막은 Si/$SiO_2$/Ti/Pt(111) 기판상에 PLD을 이용하여 증착하였으며, Phillp's X-선 회절기 (XRD)를 이용하여 결정구조와 격자 상수를 결정하였다. FE-SEM, TEM, AFM 및 EDS를 이용하여 박막 표면/단면의 미세구조 및 물질에 따른 조성비를 확인하였다. 자기적 특성을 위해Vibrating Sample Magnetometer (VSM)를 측정하였고, 전기적 특성은 LCR meter를 이용하여 측정하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.247-248
• /
• 2009

Testing standards both nationally and abroad for high flowing concrete are presented about slump flow and the time to reach 500 mm. However, the slump flow testing method to measure flow properties of high flowing concrete results in measurement error due to the differences in each person's perception of the test. This study introduced laser diode to reduce such testing errors from personal differences in experimental procedure.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.20 no.1
• /
• pp.25-30
• /
• 2009

Introduction: 585 nm Pulsed dye laser (PDL) laryngeal surgery is based on the photodynamic characteristics of selective photothermolysis and photoangiolysis and recently considered to be the treatment for a variety of benign laryngeal disease. Objective: To review the indications and outcome of office-based 585nm PDL surgery and summarize new developments. Method: Retrospective study involving 402 patients was performed, The PDL surgery could be applied to various laryngeal diseases such as laryngeal papilloma, vocal fold dysplasia, laryngeal granuloma, vocal polyp, capillarectasia, scarred vocal fold and sulcus vocalis. Results : The physiologic properties of the vascular specificity of PDL provide many advantages and appear to be effective for laryngeal treatment. The PDL resulted in precise, selective coagulation of the microvasculature without damage to the surrounding tissue. Therefore PDL surgery is safe and effective for office-based treatment of benign laryngeal disease and for all patients regardless of their overall medical condition. Conclusion: PDL surgery provides potential benefits and advantage for treating common benign laryngeal disease.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.553-558
• /
• 2007

The equation based on vector inner product by the angles between pairs of two image rays can independently separate the position and pose of a camera. As our second application, the exterior calibration between a camera and a laser range finder is proposed here through analysis of surfaces created by the equation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.45-48
• /
• 2019

파이썬 플라스크와 MySQL데이터베이스를 이용한 스마트콘텐츠에서의 효율적인 클라우드 접속기술에 관한 효율적인 방법을 제시한다. 또한 스마트콘텐츠 제작단계에서 와이파이 혹은 블루투스를 이용한 클라우드 인터넷 접속시의 오류최소화를 위한 견고한 하우징제작을 위해 어도비 일러스트레이터를 이용한 표준화된 레이져커팅 방법도 제시한다. 이는 향후 4차 산업혁명시기에 필수적인 지능적이고 다이너믹한 특성을 갖는 스마트콘텐츠 제작과정에서의 시행착오를 줄여줄 것이며, 이를 통해 다양한 아이디어의 스마트콘텐츠가 양산될 수 있는 계기가 될 것으로 생각한다. 제시한 방안의 타당성을 검증하기 위해 실제로 구축한 가장 효율적인 스마트콘텐츠의 제각과정과 그 결과를 보인다.

• 한국전기화학회:학술대회논문집
• /
• 1999.10a
• /
• pp.50-50
• /
• 1999

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.04b
• /
• pp.36.2-36.2
• /
• 2004