• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.17-23
• /
• 1999

본 논문에서는 절리면 거칠기를 정밀하게 수치화 하기 위해 레이저 변위계를 이용한 3차원 거칠기 측정기를 구동시키는 프로그램 제작 및 여러 가지 상태의 절리면에 대해 수치화를 실시하여 각종 거칠기 파라미터를 결정한 후 오차분석을 실시하여 이 기계를 이용한 측정의 타당성을 검증하였다. 동일한 절리면에 대해 물리적인 접촉에 의한 3차원 거칠기 측정기로부터 얻어진 거칠기 파라미터와 레이저 변위계를 이용한 측정기로부터 얻어진 것들 사이의 관계를 살펴보았고, 레이저 측정기에 의해 수치화된 절리면 거칠기 파라미터 사이의 상관관계를 조사하였다. 연구에 사용한 시료는 황등화강암, 여산대리석의 2종류이며, 절리형상 측정을 위한 절리는 인장균열 발생장치를 이용하여 인공적으로 제작하였다. (중략)

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.13-22
• /
• 2010

The photophysical properties of 7-diethylaminocoumarin (DEAC) laser dye have been measured in different solvents. The emission spectrum of DEAC has also been measured in cationic (CTAC) and anionic (SDS) micelles. The laser parameters have been calculated in different solvents namely acetone, dioxane, ethanol and dimethylforamide(DMF). The photoreactivity of DEAC has been studied in $CCl_4$ solvent using 366 nm light. The values of photochemical yield (${\Phi}_c$) and rate constant (k) are determined. The interaction of organic acceptors such as picric acid (PA), tetracyanoethylene (TCNE) and 7,7,8,8-tetracynoquinonedimethane (TCNQ) with DEAC are also studied using fluorescence measurements in acetonitrile ($CH_3CN$). The electrochemical investigation of (DEAC) has been carried out using cyclic voltammetry and convolutive voltammetry combined with digital simulation technique at a platinum electrode in 0.1 mol $L^{-1}$ tetrabutyl ammonium perchlorate (TBAP) in $CH_3CN$ solvent. The electrochemical parameters of the investigated compound were determined using cyclic and convolutive voltammetry. The extracted electrochemical parameters were verified and confirmed via digital simulation method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.139-145
• /
• 2010

Bending fatigue of aluminium alloy was characterized by acoustic nonlinearity of narrow band laser-generated surface wave. The higher harmonic components generated intrinsically by arrayed line laser beam were analyzed theoretically and acoustic nonlinearity was measured successfully on the surface of fatigue damaged aluminium 6061 alloy. The acoustic nonlinearity increased as a function of fatigue cycles and has close relation with damage level. Consequently, the nonlinear acoustic technique of laser-generated surface wave could be potential to characterize surface damages subjected to fatigue.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.7-13
• /
• 2010

We report a hybrid DPSSL with a pulse parameter variable LD seed, all-fiberized polarization-maintained pulsed Yb-doped fiber preamplifier chains, and a bulk Nd:$YVO_4$ power amplifier. Pulse parameter of LD seed was controlled by direct current modulation. The hybrid DPSSL generates 1064 nm laser pulses with an average power of 40W, a pulse duration of 20-40ns, and a repetition rate of 100-500kHz.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.251-257
• /
• 2013

The influences of Methotrexate as fluorophor, scatterer, absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it has been studied the molecular properties by laser induced fluorescence spectroscopy. It has been found that the effects of optical properties in scattering media by the optical parameters((${\mu}_s$, ${\mu}_a$, ${\mu}_t$). The value of scattering coefficient ${\mu}_s$ is large by means of the increasing particles of L-${\alpha}$-Phosphatidylcholine, it has been found that the slope decays exponentially as a function of depth from laser source to detector. It may also aid in designing the best model for oil chemistry, laser medicine and application of medical engineering.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.279-288
• /
• 2001

암반내에 존재하는 불연속면은 지하구조물의 안정성에 큰 영향을 미친다. 불연속면을 해석하기 위한 구성법칙에 대한 많은 연구가 진행되어 왔으나, 객관적인 거칠기 파라미터를 이용한 전단거동 모사에 관한 연구는 아직 미흡한 실정이다. 본 연구에서는 정량적인 거칠기 파라미터를 이용한 두 가지의 새로운 구성방정식을 만들어 절리 거동을 모사하였다. 첫 번째 구성법칙은 탄소성 이론에 근거하여 두께가 없는 개별절리요소 이용한 방법이고, 두 번째 구성법칙은 3차원 레이저 변위 측정 데이터를 직접 이용하여 Ohnishi가 제안한 거칠기 손상모델을 도입하였다. 제안된 두 모델을 가지고 직접 전단시험을 모사해본 결과 실제 실험에 나타나는 변형률 경화 및 연화현상 그리고 잔류전단강도와 같은 현상을 볼 수 있었다.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.438-448
• /
• 2012

Applicability of the digital photogrammetry technique for measurement of rock joint roughness is addressed in this study using the DSLR camera. Measurements of roughness were performed for two rock joint specimens using the laser profiler and the digital photogrammetry technique. The statistical roughness parameters were estimated for two dimensional roughness profiles constructed from each method. Obtained results showed that the statistical roughness parameters estimated from the digital photogrammetry technique were lower than that based on the laser profilometer, even though a high degree of correlation might exist between them. The effects of camera direction on roughness measurements were found to negligible in practice. The digital photogrammetry could be a cost effective method to measure the roughness of rock joints with various scale at the fields.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.4
• /
• pp.177-186
• /
• 2015

For data fusion of laser range finder (LRF) and vision camera, accurate calibration of external parameters which describe relative pose between two sensors is necessary. This paper proposes a new calibration method which can acquires more accurate external parameters between a LRF and a vision camera compared to other existing methods. The main motivation of the proposed method is that any corner data of a known 3D structure which is acquired by the LRF should be projected on a straight line in the camera image. To satisfy such constraint, we propose a 3D geometric model and a numerical solution to minimize the energy function of the model. In addition, we describe the implementation steps of the data acquisition of LRF and camera images which are necessary in accurate calibration results. In the experiment results, it is shown that the performance of the proposed method are better in terms of accuracy compared to other conventional methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.397-398
• /
• 2012

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.169-176
• /
• 2011

The electrochemical investigation of N,N-bis (2,5-di-tert-butylphenyl)-3,4,9,10 perylenebis (dicarboximide) laser dye have been carried out using cyclic voltammetry and convolution - deconvolution voltammetry combined with digital simulation technique at a platinum electrode in 0.1 mol/L tetrabutyl ammonium perchlorate (TBAP) in solvent 1,2 dichloroethane ($CH_2Cl-CH_2Cl$). The investigated dye was reduced via consumption of two sequential electrons to form radical anion and dianion (EE mechanism). In switching the potential to positive scan, the compound was oxidized by loss of two electrons, which were followed by a fast aggregation process ($EC_1EC_2$ mechanism). The electrode reaction pathway and the chemical and electrochemical parameters of the investigated compound were determined using cyclic voltammetry and convolutive voltammetry. The extracted electrochemical parameters were verified and confirmed via digital simulation method.