Browse > Article
http://dx.doi.org/10.7474/TUS.2012.22.6.438

A Study on Measurement of Rock Joint Roughness Using the Digital Photogrammetry  

Seo, Hyeonkyo (Department of Energy Resources Engineering, Pukyong National University)
Um, Jeong-Gi (Department of Energy Resources Engineering, Pukyong National University)
Publication Information
Tunnel and Underground Space / v.22, no.6, 2012 , pp. 438-448 More about this Journal
Abstract
Applicability of the digital photogrammetry technique for measurement of rock joint roughness is addressed in this study using the DSLR camera. Measurements of roughness were performed for two rock joint specimens using the laser profiler and the digital photogrammetry technique. The statistical roughness parameters were estimated for two dimensional roughness profiles constructed from each method. Obtained results showed that the statistical roughness parameters estimated from the digital photogrammetry technique were lower than that based on the laser profilometer, even though a high degree of correlation might exist between them. The effects of camera direction on roughness measurements were found to negligible in practice. The digital photogrammetry could be a cost effective method to measure the roughness of rock joints with various scale at the fields.
Keywords
Joint roughness; Laser profiler; Digital photogrammetry; Statistical roughness parameters;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Bae, K. Y. and C. I. Lee, 2002, Development of a 3D roughness measurement system of rock joint using laser type displacement meter, Tunnel and Underground Space, Vol. 12, pp. 268-276.   과학기술학회마을
2 Barton, N., 1973, Review of a new shear strength criterion for rock joints. Engrg. Geology, Vol. 7, pp. 287-332.   DOI   ScienceOn
3 Barton, N. and V. Choubey, 1977, The shear strength of rock joints in theory and practice, Rock Mechanics (Springer-Verlag), Vol. 10, pp. 1-54.
4 Brandow, V. D., H. M. Karara, H. H. Damberger and H. F. Krausse, A non-metric close-range photogrammetric system for mapping geologic structures in mines, Photogrammetric Engineering and Remote Sensing, Vol. 43, 1976, pp. 637-648.
5 Brown, S. R. and C. H. Scholz, 1985, Broad band width study of the topography of natural rock surfaces, J. Geophys. Res. 90, pp. 12575-12582.   DOI
6 Franklin, J. A, N. H. Maerz and C. P. Bennett, 1988, Rock mass characterization using photoanalysis, Int. J. Min. & Geo. Engrg., Vol. 6, pp. 97-112.   DOI
7 Hagan, T. O., 1980, A case for terrestrial photogrammetry in deep-mine rock structure studies, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol. 17, pp. 191-198.   DOI   ScienceOn
8 Hong, E.S., J. G. Lee, J. S. Lee and I. M. Mo, 2006, application of new measurement method for improvement of rock joint roughness underestimation, J. Korean Society of Civil Engineers, Vol. 26, pp. 133-142.   과학기술학회마을
9 Huang, S. L., S. M. Oelfke and R. C. Speck, 1992, Applicability of fractal characterization and modeling to rock joint profiles, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol. 29, pp. 89-98.   DOI
10 Jang, B. A., T. H. Kim and H. S. Jang, 2010, Characterization of the three dimensional roughness of rock joints and proposal of a modified shear strength criterion, The Journal of Engineering Geology, Vol. 20, pp. 319-327.   과학기술학회마을
11 Jermy, C. A., 1995, A Laser Scanning Device to Measure Joint Surface Roughness, Proc. Int. Conf. on Mech. of Jointed and Faulted Rock, Rossmanith P.(Ed.), Balkema, pp. 169-174.
12 Jung, C. Y. and H. D. Park, 2003, DEM generation of rock slope using laser scanning and digital stereo photogrammetry, Tunnel and Underground Space, Vol. 13, pp. 207-214.   과학기술학회마을
13 Kim, C. H. and K. John., 2009, Measurement of joint roughness in large-scale rock fracture using LIDAR, Tunnel and Underground Space, Vol. 19, pp. 52-63.   과학기술학회마을
14 Kulatilake P. H. S. W., G. Shou, T.H Huang and R.M Morgan, 1995, New peak shear strength criteria for anisotropic rock joints, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol. 32, pp. 673-697.   DOI   ScienceOn
15 Lee, S. D., C. I. Lee and Y. Park, 1997, Characterization of Joint Profiles and Their Roughness Parameters, Int. J. Rock Mech. Min. Sci., Vol. 34(3-4), Paper No. 174
16 Lee Y. H., J. R. Carr, D. J. Barr and C. T. Haas, 1990, The fractal dimension as a measure of the roughness of rock discontinuity profiles, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol. 27, pp. 453-464.   DOI   ScienceOn
17 Swan, G., 1983, Determination of stiffness and other joint properties from roughness measurements. Rock Mech. & Rock Engrg., Vol. 16, pp. 19-38.   DOI
18 Park, J. W., Y. K. Lee, J. J. Song and B. H. Choi, 2012, A new coefficient for three dimensional quantification of rock joint roughness, Tunnel and Underground Space, Vol. 22, pp. 106-119.   과학기술학회마을   DOI   ScienceOn
19 Ryu, D. W,. Lee, Y. R., Chang, Y. S, Lee, H. K. and Park, H. K., 2000, Rock joint survey system by image processing and stereophotogrammetry, Tunnel and Underground Space, Vol. 10, pp. 329-343.   과학기술학회마을
20 Seo, H. K. and J. G. Um, 2012, Generation of roughness using the random midpoint displacement method and its application to quantification of joint roughness, Tunnel and Underground Space, Vol. 22, pp. 196-204.   과학기술학회마을   DOI
21 Tung, S. H., M. H. Shih and J. C. Kuo, 2009, Evaluation of the joint roughness coefficient using the digital image correction method, Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, B.H.V. Topping, L.F. Costa Neves and R.C. Barros, (Editors), Civil-Comp Press, Stirlingshire, Scotland, Paper 229.
22 Yeu, B. M, U. Y. Park and I. T. Yang, 1983, Theoretical research on potogrammetric dip and strike determination of inclined surfaces, J. Korean society of civil engineers, Vol. 3, pp. 129-135.