• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.721-726
• /
• 2020

Genetic algorithm was first introduced to study adaption phenomena occurring in nature based on Darwin's theory of survival of the fittest. It has been used when analytical approach is not possible because of a large number of variables. In this paper, we demonstrated that genetic algorithm could be used to obtain physically optimized experimental values. We programmed a genetic algorithm that uses a few Gaussian functions to find a given function value and the same algorithm was connected to the laser system to obtain laser pulses of 40fs of maximum pulse width and 1mJ of maximum output power. This study shows that genetic algorithm can be applied to laser systems to obtain the optimized laser pulses.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.16-26
• /
• 2006

In this paper, we propose a 3D shape restoration system which measures height and surface shape of transparent ITO glass and delivers errors in focal length and incident angle of laser beam to femto-second laser micromachining. The proposed system is composed of a line scan laser, a high resolution camera, a linear motion guide synchronized to image capturing, and a control station. Also, we define the sensitivity indices that represent a relation between measurement error and a position of a camera and scan laser, and utilize it for optimum design. The results of the proposed system are compared with results of SPM(Scanning Probe Microscope) and prove the usefulness of the system.

• Journal of Space Technology and Applications
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2024

Korea Astronomy and Space Science Institute (KASI) developed an satellite laser ranging (SLR) system for tracking space objects using ultra-pulsed lasers. For the safe operation of SLR system, aircraft surveillance radar system (ASRS) was developed to prevent human damage from high power laser transmitted from the SLR system. The ASRS consists of the radar hardware subsystem (RHS) and main control subsystem (MCS), in order to detect flying objects in the direction of laser propagation and then stop immediately the laser transmission. The RHS transmits the radio frequency (RF) pulse signals and receives the returned signals, while the MCS analyzes the characteristics of received signals and distinguishes the existence of flying objects. If the flying objects are determined to be existed, the MCS sends the command signal to the laser controller in SLR system to pause the laser firing. In this study, we address the interface and operational scenarios of ASRS, including the design of RHS and MCS. It was demonstrated in the aircraft experiments that the ASRS could detect an aircraft and then stop transmitting high power laser successfully.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.311-311
• /
• 2004

1960년 레이저가 발명된 이래 레이저의 응용연구가 많은 비중을 차지하여 오늘날 다양한 방면에서 레이저가 필수적인 장치로 각광을 받게 되었다. 레이저의 특성들 중에서 특히 직진성, 에너지 집중도 및 고휘도성을 이용하여 용접, 절단, 각인 등의 산업적 응용에 많이 활용되고 있다 그 중 레이저가 보통의 빛과 같이 투명한 물체를 통과하고 특수한 렌즈를 이용하면 투명한 물체의 내부에 초점을 맞춰 크랙(crack)을 낼 수 있는 바 이를 이용하여 크리스탈이나 유리의 내부에 2차원 형상이나 3차원 형상을 각인시킬 수 있다.(중략)

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.359-366
• /
• 2005

Airborne LiDAR integrated with on-board GPS/INS and scanning technology is a state-of the-art system for direct 3D geo-spatial data acquisition. In this study, LiDAR data were calibrated using ground points in calibration site for the higher system accuracy. The accuracy results are ${\pm}15{\sim}30\;cm$ in horizontal and ${\pm}15\;cm$ in vertical. The results show that LiDAR system has capability for precise DEM and contour generation, 3D urban modeling and engineering design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1136-1143
• /
• 2010

One-way laser ranging technology is applied for the precise orbit determination of LRO, which is the first trial for supporting the missions of lunar or planetary spacecraft. In this paper, LRO payload and ground system are discussed for LRO laser ranging, and some errors effecting on time of flight and tracking mount accuracy are analyzed. Additionally several technologies are also analyzed to make laser pulses shot from ground stations to arrive in the LRO earth window. Measurement data of LRO laser ranging verified that these technologies could be implemented for one-way laser ranging of lunar spacecraft.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.13-17
• /
• 1991

고반복 레이저의 여기전원에 적합한 3단의 자기펄스 압축 시스템을 제작하고, 시스템의 특성을 고찰하였다. 자기 펄스 압축 시스템의 특성 파라메타는 펄스 변압기의 출력과 펄스파형에 대한 포화 인덕터의 단면적, 코일의 권수가 고려되었다. 실험 결과 3단의 자기 펄스압축 시스템의 최적 조건에서 펄스 압축비와 전류 이득은 각각 22,20 이었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.347-356
• /
• 2009

Recently many kind of industry request 3D Modeling and visualize for object. So application of 3D laser scanning system is improved for 3D modeling and survey. But although application of scanner is steady improved, there are variety of caution error is contained in the result. There is request high quality survey for it is restricted by when field. To analysis what is consider major factor of reflect ratio about surface specification as ratio and characteristics accidental error. So this research use 3D laer scanning system what is adopted method of laser measurement for improvement accuracy 3D scan data. As a result we can check reflect volume will be improve as specification of survey object if it has high reflect ratio. It able to improve accuracy how laser scan data is revised by reflect volume.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.46-47
• /
• 2000

고출력, 고효율, 그리고 고품질의 빔특성을 갖는 DPSSL을 개발하기 위해서는 출력빔을 저하시키는 원인인 비균일한 여기빔 분포에 의한 레이저 결정내의 열렌즈, stress 복굴절 등의 효과를 최소화하여야 한다. 지금까지 열효과를 줄여, 고출력이나 TE $M_{00}$ 모드의 레이저 빔을 얻기위한 방법으로 zigzag 슬랩 디자인$^{1)}$ , VPS 여기 시스템$^{2)}$ , Cusp 형 반사체$^{(3)}$ , 광섬유 결합$^{(4)}$ 등의 방법이 연구되어 왔다. 본 연구에서는 고출력, 고효율, 그리고 고품질의 레이저 빔특성을 동시에 만족하는 레이저를 개발할 목적으로 산란된 여기빔을 이용하는 여기구조를 고안하고 열효과가 감소된 Nd:YAG 레이저 시스템을 최적설계하였다. (중략)략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.946-949
• /
• 2010

철강회사의 열연 Slab 표면의 폭 두께를 측정하여 공정시에 이들 측정 데이터를 이용하여 양질의 제품 생산을 위한 공정 제어에 이용하고 있다. 이 경우에 카메라를 사용하여 측정하거나 레이저 스캐너를 이용하여 측정하고 있다. 본 논문에서는 카메라와 레이저를 이용하여 폭 두께를 측정하는 시스템을 구축하고 이렇게 구축된 시스템에서 레이저빔과 LED광원을 사용하였을 때 물체의 실제 길이와의 측정오차를 비교한다. 그 결과 LED광원을 이용하였을 경우 레이저의 경우와 유사하나 가격이나 생산현장의 환경을 고려하면 보다 효과적이라 하겠다. 또한 정밀한 측정을 요구할 경우 이 두 광원을 동시에 사용하면 양호한 결과를 얻을 수 있게 된다.