• 프린팅코리아
• /
• v.10 no.4
• /
• pp.86-87
• /
• 2011

캐논코리아비즈니스솔루션(대표 김천주)가 최근 장애인들이 직접생산해 전세계로 수출한 레이저복합기 MF4570dn을 장애인단체에 기증해 화제가 되었다. 이달 20일 장애인의 날을 맞아 캐논코리아의 장애인생산공장인 'I Can Cell'에 대해 알아본다.

• Korean Journal of Optics and Photonics
• /
• v.21 no.3
• /
• pp.111-117
• /
• 2010

A 780 nm monolithic individually addressable 8-beam diode laser with 10mW optical power was developed for use in a laser scanning unit. Beam to beam spacing is $30\;{\mu}m$ and an air bridge interconnection process was developed for individual operations. From electrical and optical characteristic measurements, the developed device is a suitable optical source for a high speed laser scanning unit in multi-function printing systems and laser beam printers.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1045-1046
• /
• 2011

본 논문에서는 굴곡면 커버내에 전기회로를 구현시 그 동안 포토리소그라피 공정으로 제작된 PCB를 휴대기 등 내부 케이스에 부착하여 전기회로를 구현하였으나 본 논문에서는 PCB없이 직접 케이스인 복합 폴리머소재에 레이저조사에 의해 패턴과 무전해도금으로 전기회로를 직접구현하는 기술이다. 이러한 방법은 제안한 3단계 공정기법에 의해 가능하며, 즉 사출형 복합폴리머소재제작, 소재의 레이저조사에 의한 시드패턴 구현 및 형성시드의 무전해도금에 의한 전도성패턴구현 공정을 통하여 곡면커버의 전기회로구현이 가능하다. 이에 따라 기존의 복잡한 10 단계 이상의 포토리소그라피 공정을 레이저조사에 의한 3단계 공정으로 간소화함으로서 제품의 생산성향상, 다량장비 구입절감, 작업공간축소 및 기타 소재절감 등의 경제적 효과를 얻을 수 있다. 응용분야는 2차원 평면 전기회로 외에 3차원 곡면형상의 제품인 자동차, 휴대폰, 의료기, 센서, 오토바이 등의 커버에 직접회로 응용이 가능하다. 이에 대한 타당성은 실험결과를 통하여 입증하였다.

• The Science & Technology
• /
• v.19 no.1 s.200
• /
• pp.48-57
• /
• 1986

- DATA파이프 - 화학품 생산을 위한 바이오매스의 이용 - 선형 프로그래밍 산법 - 복합질병을 위한 왁찐 - 말라리아 왁찐 - 데이터 기록용의 확장식 디스크매체 - 생세포의 냉동보존용 전산화 시각분석법 - 콜버그완 - 중유회수의 능률향상 - 충돌 들뜸체계이용 소프트 X선 레이저 - 스터얼링 사이클 저온 냉각기 - 셀데인 - 플라즈마 체계이용 소프트 X선 레이저 - 수력터빈 시스템 - 암호시스템을 해독하는 산법 - 균일한 크기의 극히 미세한 물질을 형성하는 공정 - 마그네켄치 - 리그닌 퇴화효소 - 코즈믹 튜브 - 테라비트 Km/Sec용량의 광전송 - 폴리머-세라믹 복합체 - 노바 - 살아있는 뇌의 신경 수용체를 보고 측정하는 방법

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.7-13
• /
• 2010

We report a hybrid DPSSL with a pulse parameter variable LD seed, all-fiberized polarization-maintained pulsed Yb-doped fiber preamplifier chains, and a bulk Nd:$YVO_4$ power amplifier. Pulse parameter of LD seed was controlled by direct current modulation. The hybrid DPSSL generates 1064 nm laser pulses with an average power of 40W, a pulse duration of 20-40ns, and a repetition rate of 100-500kHz.

• Composites Research
• /
• v.16 no.2
• /
• pp.41-47
• /
• 2003

This paper is concerned with the performance evaluation and comparison analysis fur several kinds of LIPCA (Lightweight Piezo-Composite Actuator) device system. LIPCA device system is composed of a piezoelectric ceramic layer and fiber reinforced light composite layers, typically a PZT ceramic layer was sandwiched by a top fiber layer with low CTE (coefficient of thermal expansion) and base layers with high CTE. To investigate the effect of lay-up structure of the LIPCA on the actuating performance, four kinds of actuator with different lay-up stacking sequence were designed, manufactured, and tested. The performance of each actuator was evaluated using an actuator test system consisted of an actuator supporting jig, a high voltage actuating power supplier, and a non-contact laser measuring system. From the comparison of the performance of the LIPCA prototypes, it was found that the actuator with higher coefficient of unimorph actuator can generate larger actuating displacement.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.60-64
• /
• 2005

STSAT-2 will demonstrate the scientific mission(acquisition of brightness temperature of the earth at 23.8 GHz and 37 GHz) and spacecraft technologies(laser ranging, frame-type satellite structure, Dual-head star tracker, CCD sun sensor, pulsed plasma thruster, etc.). In this paper STSAT-2 satellite system is described. It includes the definition of the system and the overview of payloads and BUS.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.2
• /
• pp.125-133
• /
• 2014

The purpose of this study was to investigate the effect of various surface treatment methods on the shear bond strength of orthodontic brackets in vitro. Ninety six specimens, 6 mm in diameter and 5 mm in height, were made with composite resin ($Filtek^{TM}$ Z350 XT, 3M ESPE, USA) and treated with an aging procedure. After aging, the specimens were randomly separated in six groups: (1) control with no surface treatment, (2) 37% phosphoric acid gel, (3) 4% hydrofluoric acid gel, (4) sodium bicarbonate particle abrasion, (5) diamond bur, and (6) 1 W carbon dioxide laser for 5s. The metal brackets were bonded to composite surfaces by means of an orthodontic adhesive (Transbond XT, 3M Unitek, USA). Shear bond strength values were evaluated with a universal testing machine (R&B Inc., Korea). Analysis of variance showed a significant difference between the groups. Group 5 had the highest mean shear bond strength (11.9 MPa), followed by group 6 (11.1 MPa). Among the experimental groups, group 2 resulted in the weakest mean shear bond strength (5.22 MPa). The results of this study suggest that the repair shear bond strength of the aged composite resin was acceptable by surface treatment with a carbon dioxide laser.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.94-100
• /
• 2002

This paper is concerned with the development, and performance test of LIPCA (Lightweight Piezo-composite Curved Actuator) that is lighter than other conventional piezo-composite type actuators. LIPCA is composed of top fiber composite layers with a high modulus and low CTE (Coefficient of Thermal Expansion), a middle PZT cermaic wafer, and base layers with a high modulus and high CTE. The performance of each actuator was evaluated using an actuator test system consisting of an actuator supporting jig, a high voltage actuating power supplier, and a non-contact laser measuring system. The simply supported condition actuator was excited by the power supplier with 1.0Hz cycle and up to $100\sim400V_{pp}$. The displacement at the center point of actuator was measured with non-contact laser displacement measuring system, It has been shown that the LIPCA-C2 can 34% decrease in mass and 13% increase in displacement compared to THUNDER.

• Composites Research
• /
• v.37 no.1
• /
• pp.21-31
• /
• 2024

This review paper investigates the use of shockwave attenuating materials within composite structures to enhance personnel protection against blast-induced traumatic brain injury (bTBI). This paper also introduces experimental methodologies exploited in the generation and measurement of shockwaves to evaluate the performance of the shock dissipating composites. The generation of shockwaves is elucidated through diverse approaches such as high-energy explosives, shock tubes, lasers, and laser-flyer techniques. Evaluation of shockwave propagation and attenuation involves the utilization of cutting-edge techniques, including piezoelectric, interferometer, electromagnetic induction, and streak camera methods. This paper investigates phase-separated materials, including polyurea and ionic liquids, and provides insight into composite structures in the quest for shockwave pressure attenuation. By synthesizing and analyzing the findings from these experimental approaches, this review aims to contribute valuable insights to the advancement of protective measures against blast-induced traumatic brain injuries.