• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.355-361
• /
• 2014

The aim of the present study was to evaluate a relative emission of image plate (IP) in computed radiography (CR) system by using relative sensitivity in film/screen methods. The characteristic curve was obtained by using the uniform aluminum 11-step wedge penetrometer. X-ray exposure factors on radiographic digital image were 50 kVp, 10 mAs. We adjusted zero of all parameter of algorithms (MUSICA) so proximate to raw data and applied to 200 of exposure class. Modeling on relative emission of IP are used IP without fading time and IP after 4 hours, 8 hours, 12 hours, 24 hours in the respective storage after X-ray exposure. The results of this study showed that the sensitivity point density at the measuring of relative sensitivity in CR was suited pixel values of the 2000 easy to relatively measure the characteristic curve and when relative sensitivity is decreased, the amount of light emitted from the image signal for generating was also decreased. In conclusion, the proposed method of measurement of relative sensitivity can be utilized to evaluate the quantity of relative emission of IP in CR system.

• Radiation Oncology Journal
• /
• v.26 no.2
• /
• pp.118-125
• /
• 2008

Purpose: On-line image guided radiation therapy(on-line IGRT) and(kV X-ray images or cone beam CT images) were obtained by an on-board imager(OBI) and cone beam CT(CBCT), respectively. The images were then compared with simulated images to evaluate the patient's setup and correct for deviations. The setup deviations between the simulated images(kV or CBCT images), were computed from 2D/2D match or 3D/3D match programs, respectively. We then investigated the correctness of the calculated deviations. Materials and Methods: After the simulation and treatment planning for the RANDO phantom, the phantom was positioned on the treatment table. The phantom setup process was performed with side wall lasers which standardized treatment setup of the phantom with the simulated images, after the establishment of tolerance limits for laser line thickness. After a known translation or rotation angle was applied to the phantom, the kV X-ray images and CBCT images were obtained. Next, 2D/2D match and 3D/3D match with simulation CT images were taken. Lastly, the results were analyzed for accuracy of positional correction. Results: In the case of the 2D/2D match using kV X-ray and simulation images, a setup correction within $0.06^{\circ}$ for rotation only, 1.8 mm for translation only, and 2.1 mm and $0.3^{\circ}$ for both rotation and translation, respectively, was possible. As for the 3D/3D match using CBCT images, a correction within $0.03^{\circ}$ for rotation only, 0.16 mm for translation only, and 1.5 mm for translation and $0.0^{\circ}$ for rotation, respectively, was possible. Conclusion: The use of OBI or CBCT for the on-line IGRT provides the ability to exactly reproduce the simulated images in the setup of a patient in the treatment room. The fast detection and correction of a patient's positional error is possible in two dimensions via kV X-ray images from OBI and in three dimensions via CBCT with a higher accuracy. Consequently, the on-line IGRT represents a promising and reliable treatment procedure.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.332-336
• /
• 2008

For reliable real-time interaction in a camera-tracked laser pointer system, a new idea is proposed and its feasibility is tested in this paper. In order to improve response time in the system and remove useless visual overload, the function of a laser pointer in the system is divided, the Region of Functional Interest is defined and subsequently its new interactions are introduced. Finally the experiments to measure reliability, accuracy, latency and usability are conducted and the results are presented.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.281-287
• /
• 2010

This study compares transformation algorithms for co-registration of terrestrial laser scan data. Pair-wise transformation which is used for transformation of scan data from more than two different view accumulates errors. ICP algorithm commonly used for co-registration between scan data needs initial geometry information. And it is difficult to co-register simultaneously because of too many control points when managing scan at the same time. Therefore, this study perform global registration technique using matching points. Matching points are extracted automatically from intensity image by SIFT and global registration is performed using GP analysis. There are advantages for operation speed, accuracy, automation in suggested global registration algorithm. Through the result from it, registration algorithms can be developed by considering accuracy and speed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.41-47
• /
• 2008

The import of cartography is spoke for surveying technique level of the country. Also, it is the implied expression means about international operations amount in the world of people in the country. Nowadays, various digital maps on a reduced scale were drawn in Korea including the topographic series of a nation. Though these digital maps are drawn and revised by using aerial photogrammetry or satellite image, there are some problems that it is difficult to revise or renew the topography and natural feature immediately which changes frequently. As the countermeasures of these problems we use 3D Laser Scanning accumbency method, which provides user with convenience and accumbency accuracy which is required to revise and renew digital maps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1117-1123
• /
• 2009

Head fixed type multi-focus display system using Galvano-scanner and DMD(Digital Micro-mirror Device), which is able to perfectly accommodate, can solve eye fatigue due to conflict between convergence eye movement and accommodation action in stereoscopic display. This system is able to accommodate through making convergence point about each view point and offering it in front of observer's pupil by using laser scanning method. In this paper, we analyzed laser scanning method of this multi-focus display system. And multi-focus display system based on this analysis was made, which showed that focus adjustment was possible through video camera. As a result, formation principle of view point of multi-focus system by laser scanning method was verified.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.11a
• /
• pp.50-56
• /
• 2005

The robot systems are widely used in the many industrial field as well as welding manufacturing. The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot tracking, many kinds of contact and non-contact sensors are used. Recently, the vision is most popular. In this paper, the development of the system which measures the shape of the welding part is described. This system uses the line-type structured laser diode and the vision sensor. It includes the correction of radial distortion which is often found in the image taken by the camera with short focal length. The Direct Linear Transformation (DLT) method is used for the camera calibration. The three dimensional shape of the parent metal is obtained after simple linear transformation. Some demos are shown to describe the performance of the developed system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.55-64
• /
• 2021

In this study, the operation method and accuracy of Terrestrial Laser Scanner(TLS) are reviewed and discussed by experimental measurements, and guidelines of TLS surveying operation are proposed. Ground control points and TLS station points were measured by TS and/or GPS, in TLS observation experiments, and wood targets were used which designed by this study team. RMSE accuracy of TLS scan shows that TLS surveying operation can be used in the topographic mapping of 1/250 scale and level of 1/100 BIM, the drone data also used in TLS data completeness. Additionally, as the results of the field experiment, the guidelines for TLS surveying operartions were proposed.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.89-90
• /
• 2008

본 논문은 네트워크를 통해서 이동로봇을 원격제어하기 위해 필요한 비전 시스템에서 HMD(Head Mounted Display)의 방향각 측정 알고리즘에 관한 연구이다. 우선 이 이동로봇 원격제어 시스템은 AP와 무선랜을 이용하여 독립 무선 네트워크를 구축하였고 이동로봇의 주변 환경을 레이저 센서와 스테레오 카메라를 이용하여 사용자에게 정보를 전송한다. 스테레오 카메라를 통해 전송된 영상 정보는 HMD를 통하여 볼 수 있다. 실시간으로 영상 카메라에 의해 측정 된 HMD의 회전 각도는 pen-tilt에 전송되어 HMD가 회전한 만큼 pen-tilt도 회전하여 이동로봇의 주변 환경 영상정보를 얻을 수 있는 알고리즘을 제안하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.331-332
• /
• 2011

디저털 홀로그래피는 CCD를 이용하여 간섭 패턴을 기록하고 기록된 간섭무늬에 담겨진 물체의 정보로 입체영상을 복원하는 기술을 말하며, 현미경을 이용한 디지털 홀로그래피 기술은 3D 형상 복원이나 바이오포토닉스 등 다양한 분야에서 사용되고 있다. 하지만, 디지털 홀로그래피 기술은 촬영된 간섭패턴에서 픽셀의 위상차가 레이저 파장의 1/2 이상일 경우, 기존의 phase unwrapping 알고리즘으로는 해당 픽셀의 위상차이를 계산할 수 없는 문제가 있다. 이와 같은 문제를 해결하기 위해 본 논문에서는 다수의 홀로그램 영상과 깊이맵을 사용하여 완전한 형태의 깊이맵을 구하는 방법을 제안한다.