Journal of the Korean Association of Geographic Information Studies (한국지리정보학회지)

The Korean Association of Geographic Information Studies (한국지리정보학회)
권호 표지
DOI QR코드

DOI QR Code

Investigation on Terrestrial Laser Scanner(TLS) Surveying and its Guideline

지상레이저스캐너(TLS) 측량과 가이드라인에 관한 연구

  • 김진우 ((주)지오앤 기업부설연구소) ;
  • 정운식 (공간정보품질관리원 품질관리본부) ;
  • 이영진 (경일대학교 건설방재공학과)
  • Received : 2021.11.08
  • Accepted : 2021.11.25
  • Published : 2021.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the operation method and accuracy of Terrestrial Laser Scanner(TLS) are reviewed and discussed by experimental measurements, and guidelines of TLS surveying operation are proposed. Ground control points and TLS station points were measured by TS and/or GPS, in TLS observation experiments, and wood targets were used which designed by this study team. RMSE accuracy of TLS scan shows that TLS surveying operation can be used in the topographic mapping of 1/250 scale and level of 1/100 BIM, the drone data also used in TLS data completeness. Additionally, as the results of the field experiment, the guidelines for TLS surveying operartions were proposed.

이 연구는 지상레이저스캐너(TLS)측량에 대한 관측실험과 분석을 통해 TLS 위치정확도와 운용방안을 분석하고 가이드라인을 제시한다. TLS 관측실험에서는 TS/GPS 기준점측량 기반으로 지상기준점과 TLS점을 설치하고 목제 목표판을 설계·제작하여 사용하였다. 실험결과에서는 TLS 스캔 데이터의 RMSE는 축척 1/250의 지형도 제작과 레벨 1/100의 BIM에 활용이 가능하며, 드론영상데이터와 상호보완이 가능하다. 그리고 실험과정과 결과의 분석을 통해 TLS측량에 대한 가이드라인을 제시하였다.

Keywords

References

  1. B, van Goor. 2011. Change detection and deformation analysis using terrestrial laser scanning, Delft University. 19-36pp.
  2. D-L Chen, Y-Y. Lu, Y-M. Chen, L. Ma, D-Z Jla, L.Cheng, M-C Li, D. Hu and X-F He. 2018."Automated and efficient extraction of highway tunnel lining Cross-sections using terrestrial laser scanning(TLS). Laers in Eng. 39:341-353.
  3. GSI(Geospatial Information Authority of Japan). 2018a. Public Survey Manual Using Ground Laser Scanner.
  4. GSI(Geospatial Information Authority of Japan). 2018b. Rules of work rules.
  5. GSI(Geospatial Information Authority of Japan). 2019. Cross-section drawing creation manual using 3D point cloud data.
  6. Kim, S.T. 2016. An investigation on construction BIM using 3D terrestrial laser scanning systems. Ph.D. Thesis, Univ. of Kyungil, Korea pp.14-20.
  7. Kim, J.Y. 2014. Accuracyand utility of 3d terrain data using terrestrial LiDAR. Master Thesis, Univ. of Pukyong National, Korea 47pp.
  8. Kim, J.W. Kim, S.W. and Lee, Y.J. 2020. Analysis and application of a terrestrial laser scanner in smart construction. Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography. 177-179pp.
  9. Kim, J.W. 2021. A study on the 3d modelling and Applications by terrestrial laser scanner(TLS). Master Thesis, Univ. of Kyungil, Korea. 19-40pp.
  10. Lee, Y.J. 2018. Precision surveying and instrumentation. Cheong Moon Gak Publishers. 286-305pp.
  11. Lee, Y.J. Kim, J.W. and Kim, S.W. 2019. Review and analysis of smart construction systems in Korea. KSCE 2019 CONVENTION. 306-307pp.
  12. Lee, Y.J. 2020. Unified systems on the public good data and the geospatial data in Korea - Digital Twin Data Strategy for the National Infrastructure -. Journal of the Korean Cadastre Information Association. 22(3):98-116. https://doi.org/10.46416/JKCIA.2020.12.22.3.98
  13. MLIT(Ministry of Land, Infrastructure, Transport and Tourism). 2020. As-built management procedure using a ground-based laser scanner (earthwork).
  14. S.S. Soudarissanane. 2015. The geometry of terrestrial laser scanning; Identification of errors, modeling and mitigation of scanning geometry. Delft University. 13-34pp
  15. Van Genechten. Bjorn. 2008. Theory and practice on terrestrial laser scanning: Training material based on practical applications. Universidad Politecnica de Valencia Editorial Ver 4. 36-62pp.
  16. Weixing Wang, Weisen Zhao, Lingxiao Huang, Vivian Vimarlund and Zhiwei Wang. 2014. Applications of terrestrial laser scanning for tunnels: a review. Journal of Traffic and Transportation Engineering (English Edition). 325-337pp. https://doi.org/10.1016/S2095-7564(15)30279-8
  17. Yoo, W.S. 2015. A 3dimensional object modeling via integrated data processing of MMS and laser scanning data. Master Thesis, Univ. of Seoul. 96-97pp.