• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.492-502
• /
• 2021

In electronic warfare, source enumeration and direction-of-arrival estimation are important. The source enumeration method based on eigenvalues of covariance matrix from received is one of the most used methods. However, there are some drawbacks such as accuracy less than 100 % at high SNR, poor performance at low SNR and reduction of maximum number of estimating sources. We suggested new method based on eigenvalues gaps, which is named AREG(Accumulated Ratio of Eigenvalues Gaps). Meanwhile, FGML(Fast Gridless Maximum Likelihood) which reconstructs the covariance matrix was suggested by Wu et al., and it improves performance of the existing source enumeration methods without modification of algorithms. In this paper, first, we combine AREG with FGML to improve the performance. Second, we compare the performance of source enumeration and direction-of-arrival estimation methods in Rayleigh fading. Third, we suggest new method named REG(Ratio of Eigenvalues Gaps) to reduce performance degradation in Rayleigh Fading environment of AREG.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.143-143
• /
• 2017

산업이 고도화됨에 따라 자동화 기계 및 로봇에 의해 대량 생산 되는 품목과 달리, 작업 절차의 비정형성, 비연속성 등으로 인해 여전히 농업에 많은 인력이 투입되고 있다. 국제노동기구에 따르면, 세계 인력의 절반이 농업 인력에 해당하고 작업 중 부상이나 사망 등으로 인해 가장 위험한 직업군 중 하나에 해당하는 것으로 나타났다. 시설 재배 농업의 경우, 노동집약적인 온실 내 작업 특성상 잘못된 자세로 작업하거나 지나친 작업량 등으로 인해 작업자에게 근골격계 질환이 발생할 수 있다. 근골격계 질환으로 인해 작업효율이 감소하거나 생산비용의 증가로 이어질 수 있으며, 농가 수익에 손실이 발생할 수 있다. 이에 본 연구에서는 현행 시설 재배 농업에서 사용되는 레일 전동 작업차를 이용하여 작업자가 토마토를 수확할 때의 신체에 대한 농작업의 부하를 평가하고자 하였다. 작업차를 이용한 주요 작업 절차는 작물로부터 과실 수확, 과실 상자에 과실 투입, 빈 과실 상자와 가득 찬 과실 상자의 교대, 작업차 위의 과실 상자를 운반용 파레트에 하역하는 순서로 이루어지는 것을 확인하였다. 비디오장비로 촬영된 일련의 농작업 과정을 OWAS, RULA, REBA와 같은 체크리스트형 인간공학적 작업 부하 평가 도구를 이용하여 평가한 결과, 기존 레일 전동 작업차를 이용한 농작업의 근골격계 질환 유발 가능성을 확인하였다. 동작별 위험성을 토대로 근골격계 질환 유발 가능성이 높아 개선이 필요한 농작업 동작을 선정하였다. 선정된 동작은 실험실 내 환경에서 피실험자를 통한 모의 동작의 생체 신호 계측을 통해 신체 부하 정도를 정량적으로 측정할 수 있으며, 보조가 필요한 신체 부위를 특정하거나 안전성 확보가 필요한 동작에 대한 증거가 될 수 있다. 본 연구를 통해 향후 토마토 온실 내 신선도 유지를 위한 레일 전동 작업차의 개발에 작업자의 안전과 효율성 향상을 위한 인간공학적 설계를 적용할 수 있을 것으로 기대한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.487-497
• /
• 2019

It is very difficult to detect ballistic missiles because of small cross-sections of the radar and the high maneuverability of the missiles. In addition, it is very difficult to recognize and intercept warheads because of the existence of debris and decoy with similar motion parameters in each flight phase. Therefore, feature vectors based on the maneuver, the micro-motion according to flight phase are needed, and the two types of features must be fused for the efficient recognition of ballistic warhead regardless of the flight phase. In this paper, we introduce feature vectors appropriate for each flight phase and an effective method to fuse them at the feature vector-level and classifier-level. According to the classification simulations using the radar signals predicted by the CAD models, the closer the warhead was to the final destination, the more improved was the classification performance. This was achieved by the classifier-level fusion, regardless of the flight phase in a noisy environment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.109-120
• /
• 2023

The High-Frequency Radar (HFR) is an equipment designed to measure real-time surface ocean currents in broad maritime areas.It emits radio waves at a specific frequency (HF) towards the sea surface and analyzes the backscattered waves to measure surface current vectors (Crombie, 1955; Barrick, 1972).The Seasonde HF Radar from Codar, utilized in this study, determines the speed and location of radial currents by analyzing the Bragg peak intensity of transmitted and received waves from an omnidirectional antenna and employing the Multiple Signal Classification (MUSIC) algorithm. The generated currents are initially considered ideal patterns without taking into account the characteristics of the observed electromagnetic wave propagation environment. To correct this, Antenna Pattern Measurement (APM) is performed, measuring the strength of signals at various positions received by the antenna and calculating the corrected measured vector to radial currents.The APM principle involves modifying the position and phase information of the currents based on the measured signal strength at each location. Typically, experiments are conducted by installing an antenna on a ship (Kim et al., 2022). However, using a ship introduces various environmental constraints, such as weather conditions and maritime situations. To reduce dependence on maritime conditions and enhance economic efficiency, this study explores the possibility of using unmanned aerial vehicles (drones) for APM. The research conducted APM experiments using a high-frequency radar installed at Dangsa Lighthouse in Dangsa-ri, Wando County, Jeollanam-do. The study compared and analyzed the results of APM experiments using ships and drones, utilizing the calculated radial currents and surface current fields obtained from each experiment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.81-89
• /
• 2017

Autofocus(AF) Method is essential to overcome the performance degradation due to motion measurement errors under airborne SAR environment. In this paper, back-projection algorithm(BPA) is applied to SAR raw data acquired under the squinted mode, and preprocessing algorithm of AF for BPA is investigated. To apply AF to SAR image effectively, image backplane rotation method and doppler location alignment function for BPA are proposed. The proposed method is applied to SAR raw data acquired in a flight test and shows excellent performance improvement in real data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.661-669
• /
• 2017

This paper describes an MMTI(Maritime Moving Target Indicator) for periscope detection in airborne radar. Firstly, we analyze the characteristics of sea clutter, sea targets. Secondly, we study the differences between GMTI(Ground Moving Target Indicator) and MMTI. This paper proposes an optimal MMTI operating environment and method. We also suggest a signal processing algorithm using STAP(Space-Time Adaptive Processing) for detecting small RCS target moving low speed. The detection probability for moving target with MDV(Minimum Detectable Velocity) is simulated under various RCS and multi-channel system. Finally, we analyze the major performance for range, velocity and azimuth accuracy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.119-125
• /
• 2022

In this paper, we present design, implementation and test results of CTM (Chirp Transceiver Module) EM (Engineering Model) for C-Band SAR (Synthetic Aperture Radar) Payload. The CTM is designed to operate dual frequency scan method that simultaneously operate two frequencies in each 50MHz bandwidth to achieve 120Km swath with 10m resolution at about 500Km altitude. The CTM used radiation tolerant RTG4 FPGA for space environment, and implemented with the Parallel DDS (PDDS) method which uses a small memory capacity compared to the memory-map method. Test results show high purity chirp signal generation and excellent IRF performance from received chirp signal after direct digital conversion.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.22-28
• /
• 2017

In modern electronic warfare, a variety of devices are being operated in the fields for the purposes of communication and surveillance. Therefore, if such devices work in the same band, interference may occur and affect each other. Regarding L-band in which various devices including radar systems are operating, interference from existing devices may affect new ones in the band. In this paper, we estimate a probability distribution of the interference environment in L-band from the selected measurement data, which is fundamental for the mathematical analysis. After selecting the candidates of probability distribution, we suggest the best one from the group. The results of this study are expected to be utilized as fundamental data for the mathematical approach to the L-band interference environment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.71-83
• /
• 2009

Shotcrete is an important primary support for tunnelling in rock. The quality control of shotcrete is a core issue in the safe construction and maintenance of tunnels. Although shotcrete may be applied well initially onto excavated rock surfaces, it is affected by blasting, rock deformation and shrinkage and can debond from the excavated surface, causing problems such as corrosion, buckling, fracturing and the creation of internal voids. This study suggests an effective non-destructive evaluation method of the tunnel shotcrete bonding state applied onto hard rocks using the impact-echo (IE) method and ground penetration radar (GPR). To verify previous numerical simulation results, experimental study carried out. Generally, the bonding state of shotcrete can be classified into void, debonded, and fully bonded. In the laboratory, three different bonding conditions were modeled. The signals obtained from the experimental IE tests were analyzed at the time domain, frequency domain, and time-frequency domain (i.e., the Short- Time Fourier transform). For all cases in the analyses, the experimental test results were in good agreement with the previous numerical simulation results, verifying this approach. Both the numerical and experimental results suggest that the bonding state of shotcrete can be evaluated through changes in the resonance frequency and geometric damping ratio in a frequency domain analysis, and through changes in the contour shape and correlation coefficient in a time-frequency analysis: as the bonding state worsens in hard rock condition, the autospectral density increases, the geometric damping ratio decreases, and the contour shape in the time-frequency domain has a long tail parallel to the time axis. The correlation coefficient can be effectively applied for a quantitative evaluation of bonding state of tunnel shotcrete. Finally, the bonding state of shotcrete can be successfully evaluated based on the process suggested in this study.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.441-446
• /
• 2009

This paper proposes an automatic indexing algorithm of golf video using audio information. In the proposed algorithm, the input audio stream is demultiplexed into the stream of video and audio. By means of Adaboost-cascade classifier, the continuous audio stream is classified into announcer's speech segment recorded in studio, music segment accompanied with players' names on TV screen, reaction segment of audience according to the play, reporter's speech segment with field background, filed noise segment like wind or waves. And golf swing sound including drive shot, iron shot, and putting shot is detected by the method of impulse onset detection and modulation spectrum verification. The detected swing and applause are used effectively to index action or highlight unit. Compared with video based semantic analysis, main advantage of the proposed system is its small computation requirement so that it facilitates to apply the technology to embedded consumer electronic devices for fast browsing.