• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1762-1764
• /
• 2016

A pulse radar signal is characterized by periodic pulses and noise components between them. In this Letter, we present a test statistic for detecting the presence of a pulse radar which exploits the inherent characteristics of a pulse radar signal by the ratio of maximum power to minimum power from the received signal and compares its sensing performance with that of the energy detector by computer simulation in a variety of situations.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.53-63
• /
• 2021

As the types of radio equipment becomes more complex and diversified in various fields, radio interference occurs frequently. In the domestic situation where the territory is narrow, many systems are deployed in a specific highland with a good radio wave environment. Radar systems that transmit high power signals of the same band are sometimes deployed and operating at close distance. In this paper, the type of interference was classified for the actual radio wave interference phenomenon and appropriate signal interference parameters were derived. The power density of the interference signal was predicted using the analysis method and the effectiveness was verified through measurement. And, we propose a method to minimize interference by analyzing operating scenarios of interferer radar and victim radar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.825-831
• /
• 2017

Radar clutter in real environment is in general heterogeneous and especially nonstationary if radar geometry is of non-sidelooking monostatic structure or bistatic structure. These clutter properties lead to the insufficient number of secondary data of IID(Independent identically distributed) property, conclusively deteriorate clutter suppression performance. In this paper, we propose a clutter suppression algorithm that estimates the clutter signal belonging to cull under test via calculation using only prior information, rather than using the secondary data. Through analyzing the angle-Doppler spectrum of the clutter signal, we show the estimation of the clutter signal using prior information only is possible and present the derivation of a clutter suppression algorithm through eigen-value analysis. Finally, we show the performance of the proposed algorithm by simulation.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.20-23
• /
• 2001

전자공학 기술의 응용으로 자동차를 지능화하고, 안정성을 현격하게 높이려는 연구가 주목받고 있다. 이러한 자동차의 지능화에서 중요한 요소 기술이 되는 것이, 자동차의 주변 즉 전방/후방의 차량이나 장애물을 인식하는 주변감시 기술이다. 본 논문에서는 이러한 자동차용 장애물 인식 레이더 시스템인 FMCW 레이더 신호처리시스템을 개발한다. 이 차량용 시스템이 실제 도로 환경에서 이용되기 위해서는 무엇보다 시스템의 안정된 신뢰도가 요구되며, 즉, 기상환경 및 다양한 도로환경에 무관하게 안정적인 시스템 신뢰도를 유지하기 위한 개발에 그 최종적인 목적이 있다. 이에 레이다 시스템을 통해 자차와의 거리 및 상대속도를 인지함으로서 최종적인 장애물(선행차, 교행차) 및 자차의 주행상황을 통해 안정적인 주행경보시스템을 개발한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.418-426
• /
• 2019

Recently, many studies on vital sign detection using a radar sensor related to Internet of Things(IoT) smart home systems have been conducted. Because vital signs such as respiration and cardiac rates generally cause micro-motions in the chest or back, the phase of the received echo signal from a target fluctuates according to the micro-motion. Therefore, vital signs are usually detected via spectral analysis of the phase. However, the probability of false alarms in cardiac rate detection increases as a result of various problems in the measurement environment, such as very weak phase fluctuations caused by the cardiac rate. Therefore, this study analyzes the difficulties of vital sign detection and proposes an efficient vital sign detection algorithm consisting of four main stages: 1) phase decomposition, 2) phase differentiation and filtering, 3) vital sign detection, and 4) reduction of the probability of false alarm. Experimental results using impulse-radio ultra-wideband radar show that the proposed algorithm is very efficient in terms of computation and accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2014

Abruptly occurred obstacles on highway threaten driving safety. Radar draws the attention to the collision avoidance system because it can be fully operational in all weather, and day and night condition. This paper presents the design, implementation and performance test results of pulsed Doppler radar system for detection and warning of road obstacles. The system is designed to consider highway environment and detection capability about various fixed and moving obstacles. The system consists of 4 subsystems, which include antenna unit, transmitter and receiver unit, radar signal & data processing unit, and controller & display unit. The core technologies include clutter map based change detection for fixed obstacles detection, Doppler estimation for velocity detection of moving targets, and azimuth angle estimation method using monopulse for lane estimation and tracking. The design performance of the developed radar system is verified through experiments using a fixed reference target and moving vehicles in test highway.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1173-1179
• /
• 2008

Since there are very strong clutter returns in airborne and ground weather radars used for the detection of low altitude weather hazards, the reliable weather data cannot be extracted from the weak Doppler weather signal without cancellation of these strong clutter returns. However, the clutter cancellation in Doppler frequency domain is not an easy task since even the fixed clutter returns not to mention the moving clutter can have Doppler shifts due to the antenna rotation and operational environment. Therefore, it was shown in this paper a simple array antenna system can be used for the efficient clutter cancellation in the spatial domain. The weather signal, various moving and fixed clutters were modelled and simulated to prove the performance of this adaptive array system. Also, the degree of accuracy in pulse-pair estimates of a weather radar was compared and analyzed from the simulated weather data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.955-961
• /
• 2021

In modern warfare, the importance of electronic warfare, which carries out a mission that using radio wave to find out enemy information or to protect ally information, has increased. Radar jamming technique is one of the most representative techniques of EA(Electronic Attack), it disturbs and deceives enemy radar system in order to secure ally location information. Velocity deception jamming technique, which is one of the radar jamming techniques, generally operate against pulse-doppler radar which use doppler effect in order to track target's velocity and location. Velocity Deception Jamming Technique can be implemented using DRFM(Digital Radio Frequency Memory) that performs Frequency Modulation. In this paper, I describe implementation method of VGPO/VGPI(Velocity Gate Pull-Off/Pull-In) velocity deception jamming technique using phase-sampled DRFM, and verify the operation of VGPO/VGPI velocity deception jamming technique with board test under signal injection condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2101-2107
• /
• 2012

A current velocity measurement radar for a river or a stream estimates Doppler frequencies of return echoes to extract the corresponding surface velocity information. It is very important to maintain the reliability and accuracy of these velocity estimates for water resource management such as flooding or drought conditions. However, received Doppler spectra of water surface return echoes have very widely varying shapes according to different measurement environments and weather conditions. Therefore, serious problems may arise in maintaining the reliability and accuracy of velocity estimating algorithm in a radar sensor because of Doppler spectra which can have many different kind of shapes. Therefore, in this paper, an appropriate Doppler spectrum model is suggested to simulate many various Doppler spectra. This model can be very useful in validating the reliability and accuracy of surface velocity estimates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.655-662
• /
• 2012

In this work, we propose an airborne cognitive radio system that searches a new spectrum band to avoid a communication interruption due to the interference from many radar signals. We develop a method of fast spectrum sensing based on an effective frequency by recognizing the interfering radar as well as geographical information. This effective frequency is calculated by the free-space path loss between a base station and a fighter with the speed parameter. From our analysis, it is verified that the maximum frequency searching time is reduced by half by using our method.