• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.21-26
• /
• 2001

This paper represents the turbulent intensity, the turbulent kinetic energy and Reynolds shear stress in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. The experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The turbulent intensity and the turbulent kinetic energy show that the maximum value is formed in the narrow slits distributed radially on the edge of a cone type swirl burner, hence, the combustion reaction is anticipated to occur actively near this region. And the turbulent intensities ${\upsilon}\;and\;{\omega}$ are disappeared faster than the turbulent intensity u due to the inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the Reynolds shear stress $u{\upsilon}$ is distributed about three times as large as the Reynolds shear stress $u{\omega}$ in the outer region of the cone type gas burner.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1355-1364
• /
• 2001

Characteristics of secondary vortices is topologically investigated in the near-wake region of a circular cylinder, where the Taylor's hypothesis does nut hold. The three-dimensional flow fields in the wake-transition regime were measured by a time-resolved PIV for various planes of view. The convection velocities of the Karman and secondary vortices are evaluated from the trajectory of the vortex center. Then, saddle points are determined by applying the critical point theory. It is shown that the inclination angle of the secondary vortices agrees well with the previous experimental data. The flow fields in a moving frame of reference have several critical points and the mushroom-like structure appears in the streamline patterns of the secondary vortices. Since the distributions of fluctuating Reynolds stresses defined by triple decomposition are closely related with the existence of secondary vortices, the physical meaning of them is explained in conjunction with the vortex center and saddle point trajectories.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2002

The flow and combustion patterns have been investigated inside the gasoline engine cylinder with the swirl or tumble flow, whereas the air flow characteristics, which are generated in the part of intake system before entering into the intake manifold, have not been known completely. It is necessary to analyze the flow field in the intake system consisting of air rater, throttle valve and intake manifold. The throttle valve, used to control the intake air flow rate, is important because it makes various mass flow rate and flow patterns. Three-dimen-sional How characteristics such as velocities, turbulent intensities and Reynolds shear stresses are measured by the hot wire anemometer at the exit of the throttle valve with the variation in the valve opening angle($15^{\circ}$, $45^{\circ}$, $75^{\circ}$ and $90^{\circ}$) and the Reynolds numbers (45000, 70000 and 140000). There are a lot of changes in flow characteristics at $75^{\circ}$ due to the large recirculation flow comparing with those of the other cases, and the streamwise velocity is especially enforced strongly below the valve shaft. The other component velocities are relatively large near the centerline parallel to the valve shaft. The effects of the Reynolds number on the flow field are not severe.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.130-131
• /
• 2013

캐비테이션 현상은 고 유속 환경에서 발생(inception), 성장(growth), 붕괴(collapse) 및 소멸(disappearance) 과정이 반복적으로 일어나며 그 과정에서 기포붕괴에 따른 큰 충격압력을 방지하려는 분야와 이를 능동적으로 산업분야에 적용하려는 분야로 크게 대별된다. 본 연구에서는 캐비테이션의 붕괴거동을 수중 초음파 진동자에서 미세기포를 발생시켜 PIV기법을 이용하여 유동장을 계측하였다. 초음파 진동자는 직경 16 mm이며, 진동주파수는 20 kHz, 진폭은 $5{\mu}m$, $10{\mu}m$, $30{\mu}m$ 및 $50{\mu}m$를 각각 적용하였다. 유동구조, 난류강도, 레이놀즈 응력에 대한 통계적 유동정보를 계측한 결과 충격압력의 원인으로 알려진 캐비티 붕괴로 인해 유동특성을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.566-570
• /
• 2012

본 연구에서는 비선형 k-$\varepsilon$ 모형을 이용하여 직사각형 개수로에서 평균흐름과 난류구조를 모의하였다. 표준 k-$\varepsilon$ 난류모형은 난류의 등방성을 가정하여 국부적 평형상태에서 계산하기 때문에 유선에 따른 레이놀즈 응력의 변형이 큰 경우나 이방성이 강한 경우 이를 계산하지 못한다. 이를 보완하기 위하여 제시된 것이 비선형 k-$\varepsilon$ 난류모형이다. 본 연구에서는 표준 k-$\varepsilon$ 모형과 비선형 k-$\varepsilon$ 모형에 의한 모의결과를 비교하였다. 난류모형을 검증하기 위하여 직사각형 개수로에 흐름을 완전 발달된 등류로 가정하여 해석하였다. 지배방정식을 해석하기 위해 Patankar와 Spalding (1972)이 제시한 SIMPLER 알고리즘을 사용하였고 유한체적법을 이용하여 이산화하고 엇갈린 격자체계를 사용하여 계산에서 발생하는 과도한 진동을 줄였다. 또한 차분기법은 Patankar (1980)가 제시한 Power-law 기법을 채택하였으며 경계조건으로 2층 벽법칙 모형과 Hossain과 Rodi (1993)의 모형을 이용하였다. 두 모형의 적용성을 검증하기 위하여 실측자료를 이용하여 비교하였고 그 결과 비선형 k-$\varepsilon$ 모형이 표준 k-$\varepsilon$ 모형에 비해 좀 더 실측지에 가깝게 모의하는 것을 볼 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.386-386
• /
• 2015

담수가 해수에서 흘러드는 하구에서는 성층이 관측되며 이것은 난류의 미세구조를 변화시키는 주요 원인으로 작용한다. 이러한 성층화 현상은 하구 내 부유사의 군집인 하구 최대혼탁수(Estuarine Turbidity Maximum, ETM)의 형성에 영향을 주게 된다. 본 연구는 성층의 하구 최대 혼탁수 생성 메커니즘에 관심을 두고 수치모델링을 활용한 미세 난류의 부유사 거동 분석에 초점을 두었다. 성층과 전단응력 사이의 난류 혼합을 대표하는 유동인 켈빈-헬름홀츠 불안정성(Kelvin-Helmholtz Instability)을 도입하고 성층 경계면 근처에서 부유사의 이송을 높은 레이놀즈수(Reynolds number) 유동에서 RANS(Reynolds-averaged Navier-Stokes Simulation)보다 다양한 규모의 에너지 획득이 가능하여 미세 난류 구조 재현에 장점을 갖는 Large-eddy Simulation(LES)를 활용하여 모사하였다. 여기에서, 부유사는 주위 유동의 물리적 특성 변화에 영향을 미치지 않는 Passive scalar로 가정하였으며 $6^{th}$-order Lagrangian 다항식 보간법을 적용하여 입자의 이동 속도를 계산하고 이를 시간에 대해 적분함으로써 이동 궤적을 추적하였다. 수치 모델 결과 Lock-exchange 유동 내에서 켈빈-헬름홀츠 불안정성이 발생함에 따라 경계면 주위에 위치한 부유사가 billow 내에서 트랩핑(trapping)되는 것을 보여주어 KH-billow 혹은 braids 내의 미세 난류에 의한 영향이 확인되었다. 본 연구에서는 LES를 활용하여 성층류 및 성층류 내의 부유사 혼합을 모사하여 난류의 정도에 따른 이동 궤적의 차이에 대해서 분석함으로써 성층의 난류 강도 저하에 따른 부유사의 군집으로의 영향에 대해 서술한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.367-375
• /
• 2013

In this study, the characteristics of the heat transfer coefficient and pressure drop were numerically analyzed according to the axis ratio (AR), pitch, location of vortex generator, and bump phase of the tube surface about an elliptical fin-tube heat exchanger. The boundary condition for CFD analysis was decided as a tube surface temperature of 348 K and inlet air velocity of 1-5 m/s. RSM 7th turbulent model was chosen as the numerical analysis for the sensitivity level. The analysis results indicated that the AR and transverse pitch decreased whereas the heat transfer coefficient increased. On the other hand, there was little difference in the longitudinal pitch. Furthermore, the heat transfer rate was more favorable when the vortex generator was located in front of the tube. Also, the bump phase of the tube surface indicated that the pressure drop and heat transfer were more favorable with the circle type than with the serrated type.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.34-40
• /
• 2005

Most analyses and researches on Micro Aerial Vehicle(MAV) have focused upon propulsion, automatic control, aerodynamic configuration in low Reynolds number region, and miniaturization of telemetric parts. In the present study, a structural concept for MAV is designed by using the composite material suitable for light flight structures. In order to study the load path and stress state of the MAV, the load and structural analyses are simultaneously performed by the aeroelasticity module of MSC/NASTRAN. The stability derivatives of the MAV are obtained for three symmetric, two antisymmetric, and four unsymmetric maneuvering conditions. Although the aerodynamic theory in MSC/NASTRAN could not be proper for MAV analysis, it provides an traditional and effective tool for trim and load analyses and may be corrected with the results by more accurate theory or test. The results show that the inertial load due to payloads has a more effect on stress rather than the aerodynamic load.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.732-742
• /
• 1985

Measurements of mean velocity and turbulence characteristics are obtained with a linearized constant temperature hot-wire anemometer in a two-dimensional turbulent jet discharging parallel to a flate. Wall static pressure distribution is also measure. The Reynolds number based on the jet nozzle width (D) is about 42,000 and the step height is 2.5D. The reattachment length is found to be 7.5D by using both wool tuft and oil methods. Upstream of the reattachment point, there exist double coherent structures and mean velocity, Reynolds stresses and triple product profiles are asymmetric about jet center line due to the influence of streamline curvature and recirculating flow region. Near the reattachment point, wall static pressure and turbulence quantities change its shape rapidly because of the large eddies by the solid wall. Especially, turbulence intensity has a maximum value in the reattachment regin, then decreases slowly in the redeveloping wall jet ragion. Downstream of X/D=14, a single large scale eddy structure is formed. Far downstream affer the reattachment(X/D.geq.18) mean velocity profile, the decay of maximum velocity and the variation of jet half width are nearly similar to those of plane wall jet, but the Reynolds stresses are higher than those of the latter.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.159-163
• /
• 2005

This experimental study was performed to investigate internal flow and unsteady flow characteristics using a model for actual shape of a plate heat exchanger and visualization of flow through the particle image velocimetry. Seven Reynolds numbers were selected by calculation with the height of grooved channel and sectional mean velocity of inlet flow in the experiment, and instantaneous velocity distributions and flow characteristics were experimently investigated. The triangular grooved channel had a compound flow consisting of the flow in lower channel and the groove flow receiving shear stress by the channel flow in the experiment. The sheared mixing layer, in the boundary between the triangular groove and the channel, affected main flow to raise turbulent in the channel.