• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.1021-1030
• /
• 2016

The runner system of the injection mould and the injection volume of the injection molding process greatly affect the quality of the produced part. The goal of this paper is the design of the runner system and the prediction of the injection volume for the injection moulding of a housing part of small-size air cleaner to improve the formability through the three-dimensional injection moulding analysis. The effects of the runner system of the mould on the injection moulding characteristics are investigated. From the results of the investigation, a proper design of the runner system with uniform filling characteristics and the minimized defect formation is obtained. In addition, the influence of the moving distance of the screw on filling characteristics, weldline formation and deformation characteristics is examined. From the results of the examination, an appropriate moving distance of the screw for the housing part of small-size air cleaner is estimated.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.72-77
• /
• 2017

This study was conducted to examine the effect by application method and concentration of plant growth regulator (PGR) on the growth and runner production of strawberry (Fragaria ${\times}$ ananassa Duch. cv. Maehyang) in a velno-type greenhouse. The seedlings of strawberry were transplanted in pot ($64{\times}27{\times}18cm$) filled with commercial mixed medium (Tosilee) on February 22nd, 2016. The 6-benzylaminopurine (6-BAP) was applied with foliar spray or drench, respectively as 900, 1,200 or $1,500mg{\cdot}L^{-1}$ (50 mL per plant) at 3 weeks after transplanting. Nutrient solution was sufficiently supplied by the drip irrigation as EC $0.65dS{\cdot}m^{-1}$ for rooting during 7 days. After rooting, the 450 mL nutrient solution supplied per pot twice a day (10 min). Plant height and crown diameter of 'Maehyang' mother plant appeared no significantly difference. The other growth characteristics, such as root length, number of primary roots, leaf length, leaf width, leaf area and fresh and dry weights of the shoot or root, were significantly the greatest in the control. And, the SPAD value of strawberry was the highest as 44.2 in the drench with $900mg{\cdot}L^{-1}$. The foiler spray was more effective in runner production than drench, and the number of runners appeared high values at the 900 and $1,500mg{\cdot}L^{-1}$. Whereas, the number of strawberry plantlets was effective in the drench. The results indicate that both growth and the number of runners of strawberry plant were the best achieved by foliar spray application at the $900mg{\cdot}L^{-1}$.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.50-55
• /
• 2013

The objective of this research was to investigate the impact of Ca fertilizer on the growth of mother plants, physiological disorders, and occurrence of daughter plants in propagation of 'Seolhyang' strawberry through plastic bag cultivation. To achieve this, chemicals of 1.125 mM $Ca(OH)_2$, 0.375 mM $MgCl_2$, 1.250 mM KCl were blended and designated to combined fertilizer (CF). Then, the effect was compared to the treatment of no Ca application (control) and a commercial fertilizer, CalMag (13-0-1.9-16-6:N-$P_2O_5$-$K_2O$-CaO-MgO), when those were applied every two weeks with controlled electrical conductivity (EC) of solution such as 0.6 or 1.0 $dS{\cdot}m^{-1}$. The number of plants showing Ca deficiency symptoms was the highest in control treatment, but those decreased significantly in CF or CalMag treatments. The differences between CF and CalMag in appearance of Ca deficient plants were not significant when two fertilizers were applied with same EC. The fresh and dry weights of mother plants were the greater in the treatments of CF or CalMag than those of control treatment. The treatments of 1.0 $dS{\cdot}m^{-1}$ of CF or CalMag were more effective than those of 0.6 $dS{\cdot}m^{-1}$ on the fresh and dry weight of the mother plants. The runner lengths in the treatment of 1.0 $dS{\cdot}m^{-1}$ of CF were the longest among the all treatments tested. The treatments of 1.0 $dS{\cdot}m^{-1}$ were more effective than those of 0.6 $dS{\cdot}m^{-1}$ of CF or CalMag in lengths and fresh and dry weight of runners. The fresh and dry weights of daughter plants were heavier in the treatments of CF than those of CalMag. Based on the above results, we concluded that the Ca deficiency in raising 'Seolhyang' strawberry can be lessened by the application of Ca containing fertilizers, but combined application of Ca, K and Mg was more effective than that of Ca alone for seedling production.

• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.95-101
• /
• 2011

The influence of physicochemical properties of root substrates on the growth of mother plants and occurrence of daughter plants in 'Seolhyang' strawberry propagation were investigated through plastic bag cultivation. Six different formulations of root substrates were coir dust + perlite (5:5, A), coir dust + perlite (6:4, B), coir dust + perlite (7:3, C), coir dust + coconut chip (7:3, D), coir dust + coconut chip (6:4, E), and peatmoss + vermiculite (5:5, v/v; F). The total porosities (TP) and container capacities (CC) of all root substrates were higher than 85% and 55%, respectively, indicating that all substrates were in the acceptable range. But the TP and CC of F substrate were 91.5% and 60%, respectively, which were the highest among the root substrates tested. In the soil chemical properties analyzed before planting and after harvesting of 'Seolhyang' strawberry mother plants, the root substrates of A, B, C, and F had higher electrical conductivity and $NO_3$-N concentrations than those of D and F. The root substrates of A, B, C, and F had heavier runner fresh and dry weights, longer runner lengths, and more daughter plant occurrence than those of D and F. The treatment F had higher tissue N content than any other treatments at 120 days after the transplanting of 'Seolhyang' strawberry and statistical differences were not observed among remained 5 substrates. The treatment of F also had the higher tissue contents of other nutrients except N analyzed at 120 days after transplanting. These results indicated that soil chemical properties rather than physical properties severely influenced the growth of runners and occurrence of daughter plants.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.1-6
• /
• 2012

This study is focused on simulation technology in injection molding process for plastic optic lenses. The CAE program, $3D-TIMON^{TM}$ is used for the injection molding simulation with O-PET resin material. The design for different gate shape and runner layout has been under review by CAE simulation results. Moreover, the prediction of birefringence and polarized light in injection molded optic lenses has been tested by the CAE Program. The simulation results have been expected to effectively use in the design of injection molding mould.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.78-82
• /
• 2008

Plastic gears are more and more widely used in many industrial machine elements. Plastic gear has higher properties such as light weight, wear resistance, and vibration absorbing ability than metallic gears. But, in case of using an inaccurate plastic gear, its tooth breakage happen and fatigue life is shortened due to increase of applying load and temperature rising on the tooth flank. Inaccuracy of plastic gears such as pitch circle roundness and tooth profile generates vibration and noise. In this study, an internal plastic gears which is molded by a new injection mold structure are developed. The new mold structure is called the HR3P(hot runner type 3plate mold) that has an improved runner system in order to have good filling balance. As a result from this study, an internal gear with very accurate roundness was developed by using design of experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.719-724
• /
• 2013

In the case of newly developed stud which has more performance of sound transmission loss, it is expected that sound would transmit through runner than stud. so we developed construction method of runner and stud. As a result, sound transmission loss is improved about 2 dB by using this method. But this construction method could be applied to only newly developed stud. In addition, sound leak of wall joint is about 2 dB, and it could be improved by using rubber gasket at joint.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.278-282
• /
• 1997

This paper describes results of modal testing for a high head pump-turbine runner of the Muju pumped storage power plant. The head of the pump-turbine is 601 m and the outside diameter of its runner is 4,410 mm. The modal testing was done for two conditions : 1) the runner in air ; 2) the runner in water. For both conditions, obtained are natural frequencies, corresponding mode shapes and damping ratios. From the testing, it is found that the natural frequencies of the pump-turbine runner in water is reduced approximately 40 % due to additional mass effect of the water.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.155-158
• /
• 2008

Flow imbalance among the cavities was often observed in multi-cavity mold. The flow imbalance affects on the dimensions and physical properties of molded articles. First of all, the origin of flow imbalance is geometrical imbalance of delivery system. However, even the geometry of delivery system is balanced the cavity imbalance is being developed. This comes from the temperature distribution in the cross-section of runner, which is affected by the operational conditions. In this study, experimental study of flow imbalance has been conducted for various injection speeds. This study also suggests new runner design to eliminate flow imbalance in multi-cavity injection mold. Simulation and experimental results showed suggested new designed runner could eliminate or reduce flow imbalance in multi-cavity injection mold.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.370-373
• /
• 2009

The runner-valve is an effective solution for the filling balance of the multi cavity molds. Automation of the runner-valve system is necessary for more efficient and accurate control of the filing balance. We designed an automatic runner-valve actuator for the automation and characterized the actuator by experiment. We obtained a linear relationship between motor-driving time and the height of the runner-valve. However, the motor-driving times for upward and downward directions were different due to the frictional characteristics of the actuators. Also we obtained the motor-driving times for backlashes of the 4 actuators. The results were used to formulate the relationship between the resin-arrival time and the flow rate change of the runner-valve with the theoretical equation that was derived in the previous research.