• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.58-66
• /
• 2011

This study presents the behavior characteristics of buried three-layered pipeline subjected to pile driving loads. The analysis considered the driving energy caused by 7 tonf of ram weight and 1.2m of stroke. Also the distance from vibration resource to pipeline varies in 5m to 30m. The vibration velocity and stress are investigated at the center of pipeline in longitudinal direction. In the same cover depth, attenuation ratio of vibration velocity and von Mises stresses for distance increment has shown a decreasing trend. The maximum stress occurs at the top and bottom for the inner pipe, however, an irregular stress distribution is found for the outer pipe.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2082-2089
• /
• 1992

An experimental study on forging an axi-symmetric dome type of AISI4130 was carried out using modeling material. In order to verify the validity of the experimental data, a similarity study between plasticine and AISI4130 has been made. Friction conditions were characterized by ring test for the various lubricants. For the closed-die forging experiments of an axi-symmetric dome type of AISI4130 using the plasticine, various cylindrical billets with different aspect ratios were forged and different flash width to thickness(W/T) ratios were used in order to determine the optimum forging conditions. As W/T ratios decrease forging loads decrease while excess volumes increase. It was found out that the experimental results reproduce the similiar results available in the literature. As a result of these experiments, it was construed physical modeling is an excellent tool for forging process simulation at a practical level.

• Journal of the Korean Institute of Gas
• /
• v.15 no.4
• /
• pp.15-20
• /
• 2011

This study presents the behavior characteristics of buried three-layered pipeline subjected to pile driving loads corresponding to its cover depth. The analysis considered the driving energy caused by 7 tonf of ram weight and 1.2m of stroke with 20m distance from buried pipeline for all the analysis cases. A cover depth of pipe is varied 0.6m to 3.8m for this research. Vibration Velocity and stress are investigated at the center section in longitudinal direction. With same distance from pile, attenuation ratio of vibration velocity for increment of cover depth has shown an increasing trend. Also, Stress attenuation ratio of inner pipe is increased with cover depth.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.4
• /
• pp.134-145
• /
• 2002

The purpose of this study is to present the functional and technical solutions for text learning of web-based textbook in which each letter has its own focal point. The solutions help learners not to lose the main focus when eye moves to the next letter or line. The text screen of the electronic textbook automatically scrolls the text to up and down or left and right directions which are preassigned by learner. It doesn't need the operation of mouse or keyboard. And learner can change scroll speed and types anytime during scrolling. Automatic text scroll function is a solution for controlling data and screen to reflect the personal favor and ability. It contains the content structure of the text(characteristics, categorizations etc.), the appearance of the text(density, size, font etc.), scroll options(scroll, speed etc.), program control type(ram resident program etc.), and the application of the screen design principles(legibility etc.). To resolve these functional problems, technical 8 phases are provided, which are environment setting, scroll option setting, copy, data analysis, scroll coding, centered focus coding, left and right focus coding, implementation. The learner can focus on text without dispersion because the text focal points stay in the fixed area of screen. 1bey read the text following their preferences for fonts, sizes, line spacing and so on.

• Journal of Veterinary Clinics
• /
• v.8 no.2
• /
• pp.147-152
• /
• 1991

Trichophyton mentagrophytes was described as a primary cause of mycotic dermatitis in two young goats housed together in a humid, ill-ventilated and unhygienic byre. The diagnosis in both the cases was established on the detection of fungal element in the skin scrapings by potassium hydroxide technique and isolation of the pathogen in pure growth on mycological medium at 30$^{\circ}C$. The lesions were found on the face of one kid and on the neck and ear of another one. Two adult goats housed in the same enclosure were found to be free from this disease. Further, there was no evidence of ringworm in the goat owner and his family members. Genetic crossing of both the isolates on modified sunflower seed medium indicated that they belonged to (―) mating type. Hair performation test revealed the keratolytic activity of both the strains of T. mentagrophytes. The public health significance and chemotherapy are also discussed. The question of source of infection could not be emphatically established.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.313-315
• /
• 2010

In this paper, we describe research results of developing hardware rasterizer that is applicable to mobile 3D graphics system, designed in SIMD architecture and verified in FPGA. Tile-based scan conversion unit is designed like SIMD architecture running four tiles simultaneously and each tile traverses pixels hierarchical in 3-level so that visiting counts is minimized. As experimental results, $8{\times}8$ is the most efficient size of tile and the last step of tile traversing is performed on $2{\times}2$ sized subtile. The rasterizer supports flat shading and gouraud shading and texture mapper supports affine mapping and perspective corrected mapping. Also, texture mapper supports point sampling mode and bilinear interpolating sampling mode and two types of wrapping modes and various blending modes. The rasterzer operates as 120Mhz on xilinx vertex4 $l{\times}100$ device. To easy verification, texture memory and frame buffer are generated as block rom and block ram.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1037-1043
• /
• 2020

This paper presents a new Physical Unclonable Function (PUF) security chip based on a low-cost, small-area, and low-power semiconductor process for IoT devices. The proposed security circuit has multiple challenge-to-response pairs (CRP) by adding the switching circuit to the cross-coupled path between two inverters of the SRAM structure and applying the challenge input. As a result, the proposed structure has multiple CRPs while maintaining the advantages of fast operating speed and small area per bit of the conventional SRAM based PUF security chip. In order to verify the performance, the proposed switched SRAM based PUF security chip with a core area of 0.095㎟ was implemented in a 180nm CMOS process. The measurement results of the implemented PUF show 4096-bit number of CRPs, intra-chip Hamming Distance (HD) of 0, and inter-chip HD of 0.4052.

• Journal of Popular Narrative
• /
• v.25 no.3
• /
• pp.67-99
• /
• 2019

This paper analyzed romance novels imported into Korea in the 1980s and examined the traits of Korean girls' culture at that time. To this end, This paper chose as subjects the series of 'high-teen romance' published by Samjungdang, 'princess bestseller' by Seoul Publishing and the 'silhouette romance' by Joongang Ilbo in the 1980s. Through the aspects of the paperback romances, the traits of the artist, the content of the work, and the response of the reader, this paper analyzed the position and affection of romance as a genre in Korean culture in the 1980s. In the 1980s, most of the paperback romances available in Korea were translations of the modern and progressive present lines of Harlequin Enterprise's category romance. There were also many writers who were mostly introduced with progressive characters like Charlotte Lamb. The Harlequin romance depicts a story of sensual love. These translated 1980s paperback romance novels allowed girls in Korea to freely imagine the problems of sex and love. In particular, it showed a new perspective on women's sexuality. In Korean love novels, the sexuality of women was treated as an object for the gaze of men. The novels of female writers as college student who criticized this dealt with women's sexuality, but focused on criticism and resistance to the ideology of chastity. The paperback romance made it possible for women to freely enjoy their sexuality by escaping the ethical standards of reality. In addition, the paperback romance was an escape from the frustration of love. Romantic love in Korean love novels did not lead to the unification of mind and body, and always ended in tragedy. On the contrary, the paperback romance started with the fear of the girl who felt love for the first time, showed the process of winning over anxiety, confirming love and reaching a happy marriage. Through this, girls understood general love that was not subordinated to the ideology of chastity, and accepted love positively. The process of establishing romance as a genre in Korean culture and the traits of its readers have not yet been sufficiently clarified yet. This paper compared the romance genre with the other love novels of the day, explaining the position and meaning of the romance genre in Korean culture in the 1980s. Through this, we were able to chart the historical development of the Korean romance genre.