• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1833-1838
• /
• 2008

본 연구는 호안보호공 중 하천 바닥 또는 제방의 유지시설로 많이 쓰이는 사석의 안정성 분석을 위하여 수리실험을 실시하였다. 안정성 분석을 위해 Isbash식, Netherlands 간이공식, ASCE식, Pilarczk식, Maynord식을 검토하였다. 실험결과 사석의 직경이 커짐에 따라 한계유속이 증가하였고, 형상계수가 커지면 한계유속이 증하하였다. 또한 랜덤배열일 때보다 규칙배열일 경우 한계유속이 크게 측정 되었다. 이로서 형상계수와 인터로킹의 정도가 사석의 안정성에 중요한 함수라는 것을 나타낸다. 사석은 Maynord의 직경공식과 미 California주 정부 중량공식이 적합하게 나왔고, 모형사석의 규칙배열에서는 Pilarczk의 직경공식과 Netherlands 간이 무게공식이 적합하였다. 모형사석의 랜덤배열시에는 Isbash 공식이 적합하였다. Isbash 공식과 직경산정에 형상계수를 대입하여 새로운 식을 개발하였다. 이는 기존공식의 적용성을 더 개선할 수 있으리라고 기대된다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.153.2-153.2
• /
• 2005

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.221-229
• /
• 2002

In thin paper, error tolerance of each array element which satisfies error tolerance of beam pattern is decided by using the Monte-Carlo method. Conventional deterministic method decides the error tolerance of each element from the acceptance pattern by testing all cases, but this method is not suitable for the analysis of large number of array elements because the computation resources increase exponentially as the number of array elements increases. To alleviate this problem, we applied new algorithm which reduces the increment of calculation time increased by the number of the array elements. We have validates the determined error tolerance region through several simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.875-880
• /
• 2019

A RC4 stream cipher is widely used for security applications such as IEEE 802.11 WEP, IEEE 802.11i TKIP and so on, because it can be simply implemented to dedicated circuits and achieve a high-speed encryption. RC4 is also used for systems with limited resources like IoT, but there are performance limitations. RC4 consists of two stages, KSA and PRGA. KSA performs initialization and randomization of S-box and K-box and PRGA produces cipher texts using the randomized S-box. In this paper, we initialize the S-box and K-box in the randomization of the KSA stage to reduce the initialization delay. In the randomization, we use clusters to process swap operation between elements of S-box in parallel and can generate two cipher texts per clock. The proposed RC4 cipher hardware can initialize S-box and K-box without any delay and achieves about 2 times to 6 times improvement in KSA randomization and key stream generation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.333-336
• /
• 2000

본 논문에서는 Monte-Carlo simulation과 deterministic simulation을 합성한 방법으로 특성허용 패턴을 만족하는 개별소자의 오차범위를 가중치에 따라 차별적으로 규정을 하였다. 일반적으로 사용되는 통계적인 방법은 불규칙한 특성을 갖는 랜덤오차를 정규분포를 갖는 랜덤변수로 모델링을 하여 허용 패턴으로부터 오차의 범위를 규정하는데, 이렇게 구해진 범위는 개별소자의 가중치의 영향을 고려하지 않고 일률적인 특성을 나타낸다는 단점이 있다. 이에 반해 deterministic simulation을 통해서 얻어진 오차의 범위는 가중치에 따라서 상대적인 범위를 결정할 수 있지만 해석 하고자하는 배열소자의 개수에 따라서 계산량이 지수승으로 증가하는 단점이 있어 10개 이상의 소자를 갖는 배열에는 적합하지 않다. 이러한 단점을 보완하기 위해서는 본 논문에서는 Monte-Carlo simulation과 deterministic simulation의 합성적 방법을 사용해서 배열소자의 증가에 따른 계산량의 증가를 줄이면서 각 가충치에 따라 상대적인 개별오차의 허용범위를 결정하였다. 그리고 이렇게 규정된 오차의 범위를 간단한 모의 실험을 통해서 검증하였다.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.187-192
• /
• 2017

The compensation characteristics of the distorted WDM channels compensated for by dispersion management (DM) and optical phase conjugation in the long-haul (50 fiber spans ${\times}80km$) transmission link with the randomly distributed single mode fiber (SMF) length and residual dispersion per spans (RDPS) are investigated as a function of the arrangement of SMF and dispersion compensating fiber (DCF) and the control position of net residual dispersion (NRD). It is confirmed that the compensation effect of the distorted WDM channels strongly depends on the arragement of SMF and DCF, rather than the control position of NRD.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.260-268
• /
• 2006

The micromechanical approach was used to investigate the interfacial strain distributions of a unidirectional composite under transverse loading in which fibers were usually found to be randomly packed. Representative volume elements (RVE) for the analysis were composed of both regular fiber arrays such as a square array and a hexagonal array, and a random fiber array. The finite element analysis was performed to analyze the normal, tangential and shear strains at the interface. Due to the periodic characteristics of the strain distributions at the interface, the Fourier series approximation with proper coefficients was utilized to evaluate the strain distributions at the interface for the regular and random fiber arrays with respect to fiber volume fractions. From the analysis, it was found that the random arrangement of fibers had a significant influence on the strain distribution at the interface, and the strain distribution in the regular fiber arrays was one of special cases of that in the random fiber array.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.361-367
• /
• 2024

Ultrasound in the air is widely used in industry as a measurement technique to prevent abnormalities in the machinery. Recently, the use of airborne ultrasound imaging techniques, which can find the location of abnormalities using an array transducers, is increasing. A beamforming method that uses the phase difference for each sensor is used to visualize the location of the ultrasonic sound source. We exploit a random sparse ultrasonic array and obtain beamforming power distribution on the source in a certain distance away from the array. Conventional beamforming methods inevitably have limited spatial resolution depending on the number of sensors used and the aperture size. A high-resolution ultrasound imaging technique was implemented by applying functional beamforming as a method to overcome the geometric constraints of the array. The functional beamforming method can be expressed as a generalized beam forming method mathematically, and has the advantage of being able to obtain high-resolution imaging by reducing main-lobe width and side lobes. As a result of observation through computer simulation, it was verified that the resolution of the ultrasonic source in the air was successfully increased by functional beamforming using the ultrasonic sparse array.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.870-878
• /
• 1998

The cross-flow fan which constitutes a fan-duct system with a stabilizer and a scroll casing is widely used in many air-ventilating and air-conditioning devices. Its ooperating points of high efficiency and loading conditions frequently induce a annoying sharp tonal component of discrete frequency on the noise spectrum, which is open called as a BPF(Blade-Passing-Frequency) noise and degrades the sound quality of the devices. this BPF tone has been one of the defects of the cross-flow fan. This study proposes two methods in order to reduce this tonal noise component, which are the random distributions of the fan blades and the skewed shapes of the stabilizer. The proposed methods are verified by a simple analytical model and are applied in manufacturing the cross-flow fan and the stabilizer samples. Some experiments are carried out to verify the reduction capability of BPF tones of above two schemes and the experimental results are analyzed. The comparison between two method is also carried out.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.476-481
• /
• 2015

We have parallelized the cumulative sum (CUSUM) test of NIST's statistical random number test suite in a CUDA environment. Storing random walks in an array instead of in scalar variables eliminates data dependence. The change in data structure makes it possible to apply parallel scans, scatters, and reductions at each stage of the test. In addition, serial data exchanges between CPU and GPU are removed by migrating CPU's tasks to GPU. Finally we have optimized global memory accesses. The overall speedup is 23 times over the sequential version. Our results contribute to improving security of random numbers for cryptographic keys as well as reducing the time for evaluation of randomness.